Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 28 Jun 2022 22:08:05 -0700
From:   Dmitry Torokhov <dmitry.torokhov@gmail.com>
To:     Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc:     linux-kernel@vger.kernel.org,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Marco Felsch <m.felsch@pengutronix.de>,
        Michael Trimarchi <michael@amarulasolutions.com>,
        Oliver Graute <oliver.graute@kococonnector.com>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-input@vger.kernel.org
Subject: Re: [RESEND PATCH v4 0/6] Input: edt-ft5x06 - Improve configuration
Message-ID: <YrveNToV1Sqs1X4X@google.com>
References: <20220621123937.1330389-1-dario.binacchi@amarulasolutions.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220621123937.1330389-1-dario.binacchi@amarulasolutions.com>
Precedence: bulk

On Tue, Jun 21, 2022 at 02:39:31PM +0200, Dario Binacchi wrote:
> The series was born from the analysis and mitigation of a crc problem
> raised by an M06 type device. The added sysfs attributes were helpful
> in debugging the problem. Patches that change the report rate on driver
> probing, mitigated crc errors on kernel bootup. The patch to get/set
> report rate by sysfs for an M12 device, has been tested.
> 
> Changes in v4:
> - Add Rob Herring 'Acked-by' tag.
> 
> Changes in v3:
> - Add hz unit suffix.
> - Add '|' to description.
> - Check the lower and upper limits of the report-rate-hz value
> - Convert the M06 report-rate-hz value
> 
> Changes in v2:
> - Add Oliver Graute's 'Acked-by' tag to:
>   * Input: edt-ft5x06 - show model name by sysfs
>   * Input: edt-ft5x06 - show firmware version by sysfs
> - Fix yaml file. Tested with `make DT_CHECKER_FLAGS=-m dt_binding_check'.
> 
> Dario Binacchi (6):
>   dt-bindings: input: touchscreen: edt-ft5x06: add report-rate-hz
>   Input: edt-ft5x06 - get/set M12 report rate by sysfs
>   Input: edt-ft5x06 - set report rate by dts property
>   Input: edt-ft5x06 - show model name by sysfs
>   Input: edt-ft5x06 - show firmware version by sysfs
>   Input: edt-ft5x06 - show crc and header errors by sysfs
> 
>  .../input/touchscreen/edt-ft5x06.yaml         |   8 ++
>  drivers/input/touchscreen/edt-ft5x06.c        | 103 ++++++++++++++++--
>  2 files changed, 103 insertions(+), 8 deletions(-)

Applied the lot with a few small adjustments, thank you.

-- 
Dmitry