Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 29 Jun 2022 09:45:10 +0200
From:   Johan Hovold <johan@kernel.org>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        Jassi Brar <jassisinghbrar@gmail.com>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>
Subject: Re: [PATCH v3 5/5] arm64: dts: qcom: add SA8540P and ADP
Message-ID: <YrwDBpvW4PIWRQ4X@hovoldconsulting.com>
References: <20220629041438.1352536-1-bjorn.andersson@linaro.org>
 <20220629041438.1352536-6-bjorn.andersson@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220629041438.1352536-6-bjorn.andersson@linaro.org>
Precedence: bulk

On Tue, Jun 28, 2022 at 09:14:38PM -0700, Bjorn Andersson wrote:
> Introduce the Qualcomm SA8540P automotive platform and the SA8295P ADP
> development board.
> 
> The SA8540P and SC8280XP are fairly similar, so the SA8540P is built
> ontop of the SC8280XP dtsi to reduce duplication. As more advanced
> features are integrated this might be re-evaluated.
> 
> This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
> regulators, debug UART, PMICs, remoteprocs (NSPs crashes shortly after
> booting) and USB.
> 
> The SA8295P ADP contains four PM8450 PMICs, which according to their
> revid are compatible with PM8150. They are defined within the ADP for
> now, to avoid creating additional .dtsi files for PM8150 with just
> addresses changed - and to allow using the labels from the schematics.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> 
> Changes since v2:
> - Sorted "status" property last throughout the patch
> - Dropped empty reserved-memory node
> - Dropped multiport vbus-enable pinctrl states for now

> +/* PINCTRL */
> +&pm8450c_gpios {
> +	usb2_en_state: usb2-en-state {
> +		pins = "gpio9";
> +		function = "normal";
> +		output-high;
> +		power-source = <0>;
> +	};
> +};
> +
> +&pm8450e_gpios {
> +	usb3_en_state: usb3-en-state {
> +		pins = "gpio5";
> +		function = "normal";
> +		output-high;
> +		power-source = <0>;
> +	};
> +};

You forgot to remove these two when you removed the other multiport
vbus-enable states.

Looks good otherwise.

Johan