Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Leo Yan <leo.yan@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Georgi Djakov <djakov@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Leo Yan <leo.yan@linaro.org>
Subject: [PATCH v2 4/5] interconnect: qcom: icc-rpm: Support multiple buckets
Date:   Thu, 30 Jun 2022 13:57:21 +0800
Message-Id: <20220630055723.704605-5-leo.yan@linaro.org>
In-Reply-To: <20220630055723.704605-1-leo.yan@linaro.org>
References: <20220630055723.704605-1-leo.yan@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The current interconnect rpm driver uses a single aggregate bandwidth to
calculate the clock rates for both active and sleep clocks; therefore,
it has no chance to separate bandwidth requests for these two kinds of
clocks.

This patch studies the implementation from interconnect rpmh driver to
support multiple buckets.  The rpmh driver provides three buckets for
AMC, WAKE, and SLEEP; this driver only needs to use WAKE and SLEEP
buckets, but we keep the same way with rpmh driver, this can allow us to
reuse the DT binding and avoid to define duplicated data structures.

This patch introduces two callbacks: qcom_icc_pre_bw_aggregate() is used
to clean up bucket values before aggregate bandwidth requests, and
qcom_icc_bw_aggregate() is to aggregate bandwidth for buckets.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 51 ++++++++++++++++++++++++++++-
 drivers/interconnect/qcom/icc-rpm.h |  6 ++++
 2 files changed, 56 insertions(+), 1 deletion(-)

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 8c9d5cc7276c..b025fc6b97c9 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -254,6 +254,54 @@ static int __qcom_icc_set(struct icc_node *n, struct qcom_icc_node *qn,
 	return 0;
 }
 
+/**
+ * qcom_icc_rpm_pre_bw_aggregate - cleans up values before re-aggregate requests
+ * @node: icc node to operate on
+ */
+static void qcom_icc_pre_bw_aggregate(struct icc_node *node)
+{
+	struct qcom_icc_node *qn;
+	size_t i;
+
+	qn = node->data;
+	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+		qn->sum_avg[i] = 0;
+		qn->max_peak[i] = 0;
+	}
+}
+
+/**
+ * qcom_icc_bw_aggregate - aggregate bw for buckets indicated by tag
+ * @node: node to aggregate
+ * @tag: tag to indicate which buckets to aggregate
+ * @avg_bw: new bw to sum aggregate
+ * @peak_bw: new bw to max aggregate
+ * @agg_avg: existing aggregate avg bw val
+ * @agg_peak: existing aggregate peak bw val
+ */
+static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+				 u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+	size_t i;
+	struct qcom_icc_node *qn;
+
+	qn = node->data;
+
+	if (!tag)
+		tag = QCOM_ICC_TAG_ALWAYS;
+
+	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+		if (tag & BIT(i)) {
+			qn->sum_avg[i] += avg_bw;
+			qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
+		}
+	}
+
+	*agg_avg += avg_bw;
+	*agg_peak = max_t(u32, *agg_peak, peak_bw);
+	return 0;
+}
+
 static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 {
 	struct qcom_icc_provider *qp;
@@ -414,7 +462,8 @@ int qnoc_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&provider->nodes);
 	provider->dev = dev;
 	provider->set = qcom_icc_set;
-	provider->aggregate = icc_std_aggregate;
+	provider->pre_aggregate = qcom_icc_pre_bw_aggregate;
+	provider->aggregate = qcom_icc_bw_aggregate;
 	provider->xlate_extended = qcom_icc_xlate_extended;
 	provider->data = data;
 
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index ebee9009301e..a49af844ab13 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -6,6 +6,8 @@
 #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
 #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
 
+#include <dt-bindings/interconnect/qcom,icc.h>
+
 #define RPM_BUS_MASTER_REQ	0x73616d62
 #define RPM_BUS_SLAVE_REQ	0x766c7362
 
@@ -65,6 +67,8 @@ struct qcom_icc_qos {
  * @links: an array of nodes where we can go next while traversing
  * @num_links: the total number of @links
  * @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @sum_avg: current sum aggregate value of all avg bw requests
+ * @max_peak: current max aggregate value of all peak bw requests
  * @mas_rpm_id:	RPM id for devices that are bus masters
  * @slv_rpm_id:	RPM id for devices that are bus slaves
  * @qos: NoC QoS setting parameters
@@ -75,6 +79,8 @@ struct qcom_icc_node {
 	const u16 *links;
 	u16 num_links;
 	u16 buswidth;
+	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
 	int mas_rpm_id;
 	int slv_rpm_id;
 	struct qcom_icc_qos qos;
-- 
2.25.1