Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
To:     linus.walleij@linaro.org
Cc:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        matthias.bgg@gmail.com, sean.wang@mediatek.com,
        linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
        nfraprado@collabora.com,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
Subject: [PATCH] dt-bindings: pinctrl: mt8195: Fix name for mediatek,rsel-resistance-in-si-unit
Date:   Thu, 30 Jun 2022 14:23:34 +0200
Message-Id: <20220630122334.216903-1-angelogioacchino.delregno@collabora.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

When this property was introduced, it contained underscores, but
the actual code wants dashes.

Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.

Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---

Note: No devicetree uses this property as of now.
      Even if any DT did, it wouldn't work, as the pinctrl code checks
      for 'mediatek,rsel-resistance-in-si-unit'.

 .../devicetree/bindings/pinctrl/pinctrl-mt8195.yaml    | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 15989743afd2..b0fea44403e7 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -51,7 +51,7 @@ properties:
     description: The interrupt outputs to sysirq.
     maxItems: 1
 
-  mediatek,rsel_resistance_in_si_unit:
+  mediatek,rsel-resistance-in-si-unit:
     type: boolean
     description: |
       Identifying i2c pins pull up/down type which is RSEL. It can support
@@ -144,7 +144,7 @@ patternProperties:
               "MTK_PUPD_SET_R1R0_11" define in mt8195.
               For pull down type is RSEL, it can add RSEL define & resistance
               value(ohm) to set different resistance by identifying property
-              "mediatek,rsel_resistance_in_si_unit".
+              "mediatek,rsel-resistance-in-si-unit".
               It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
               & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
               & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -163,7 +163,7 @@ patternProperties:
               };
               An example of using si unit resistance value(ohm):
               &pio {
-                mediatek,rsel_resistance_in_si_unit;
+                mediatek,rsel-resistance-in-si-unit;
               }
               pincontroller {
                 i2c0_pin {
@@ -192,7 +192,7 @@ patternProperties:
               "MTK_PUPD_SET_R1R0_11" define in mt8195.
               For pull up type is RSEL, it can add RSEL define & resistance
               value(ohm) to set different resistance by identifying property
-              "mediatek,rsel_resistance_in_si_unit".
+              "mediatek,rsel-resistance-in-si-unit".
               It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
               & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
               & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -211,7 +211,7 @@ patternProperties:
               };
               An example of using si unit resistance value(ohm):
               &pio {
-                mediatek,rsel_resistance_in_si_unit;
+                mediatek,rsel-resistance-in-si-unit;
               }
               pincontroller {
                 i2c0-pins {
-- 
2.35.1