Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Shengjiu Wang <shengjiu.wang@nxp.com>
To:     nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com, festevam@gmail.com,
        shengjiu.wang@gmail.com, lgirdwood@gmail.com, broonie@kernel.org,
        perex@perex.cz, tiwai@suse.com, alsa-devel@alsa-project.org,
        robh+dt@kernel.org, krzk+dt@kernel.org, devicetree@vger.kernel.org
Cc:     linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/6] ASoC: fsl_micfil: Add support for PLL switch at runtime
Date:   Fri,  1 Jul 2022 17:32:38 +0800
Message-Id: <1656667961-1799-4-git-send-email-shengjiu.wang@nxp.com>
In-Reply-To: <1656667961-1799-1-git-send-email-shengjiu.wang@nxp.com>
References: <1656667961-1799-1-git-send-email-shengjiu.wang@nxp.com>
Precedence: bulk

i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.

The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of audio file rate.

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/Kconfig      |  1 +
 sound/soc/fsl/fsl_micfil.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 910b8747b6bd..533937166b4a 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -81,6 +81,7 @@ config SND_SOC_FSL_MICFIL
 	select REGMAP_MMIO
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_FSL_UTILS
 	help
 	  Say Y if you want to add Pulse Density Modulation microphone
 	  interface (MICFIL) support for NXP.
diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 18ab80b68752..431278bfbd7b 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -24,6 +24,7 @@
 #include <sound/core.h>
 
 #include "fsl_micfil.h"
+#include "fsl_utils.h"
 
 #define MICFIL_OSR_DEFAULT	16
 
@@ -42,6 +43,8 @@ struct fsl_micfil {
 	const struct fsl_micfil_soc_data *soc;
 	struct clk *busclk;
 	struct clk *mclk;
+	struct clk *pll8k_clk;
+	struct clk *pll11k_clk;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
 	struct sdma_peripheral_config sdmacfg;
 	unsigned int dataline;
@@ -283,6 +286,27 @@ static int fsl_micfil_trigger(struct snd_pcm_substream *substream, int cmd,
 	return 0;
 }
 
+static int fsl_micfil_reparent_rootclk(struct fsl_micfil *micfil, unsigned int sample_rate)
+{
+	struct device *dev = &micfil->pdev->dev;
+	u64 ratio = sample_rate;
+	struct clk *clk;
+	int ret;
+
+	/* Get root clock */
+	clk = micfil->mclk;
+
+	/* Disable clock first, for it was enabled by pm_runtime */
+	clk_disable_unprepare(clk);
+	fsl_asoc_reparent_pll_clocks(dev, clk, micfil->pll8k_clk,
+				     micfil->pll11k_clk, ratio);
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int fsl_micfil_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -306,6 +330,10 @@ static int fsl_micfil_hw_params(struct snd_pcm_substream *substream,
 	if (ret)
 		return ret;
 
+	ret = fsl_micfil_reparent_rootclk(micfil, rate);
+	if (ret)
+		return ret;
+
 	ret = clk_set_rate(micfil->mclk, rate * clk_div * osr * 8);
 	if (ret)
 		return ret;
@@ -610,6 +638,9 @@ static int fsl_micfil_probe(struct platform_device *pdev)
 		return PTR_ERR(micfil->busclk);
 	}
 
+	fsl_asoc_get_pll_clocks(&pdev->dev, &micfil->pll8k_clk,
+				&micfil->pll11k_clk);
+
 	/* init regmap */
 	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(regs))
-- 
2.17.1