Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Heiko Stuebner <heiko@sntech.de>
To:     Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        linux-arm-kernel@lists.infradead.org
Cc:     Samuel Holland <samuel@sholland.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Maxime Ripard <mripard@kernel.org>, Ondrej Jirman <x@xff.cz>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev,
        Samuel Holland <samuel@sholland.org>
Subject: Re: [PATCH 2/6] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
Date:   Fri, 01 Jul 2022 15:03:35 +0200
Message-ID: <6931273.CvnuH1ECHv@phil>
In-Reply-To: <20220626021148.56740-3-samuel@sholland.org>
References: <20220626021148.56740-1-samuel@sholland.org> <20220626021148.56740-3-samuel@sholland.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

Am Sonntag, 26. Juni 2022, 04:11:43 CEST schrieb Samuel Holland:
> H6 requires I/O bias configuration on both of its PIO devices.
> Previously it was only done for the main PIO.
> 
> The setting for Port L is at bit 0, so the bank calculation needs to
> account for the pin base. Otherwise the wrong bit is used.
> 
> Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
> Signed-off-by: Samuel Holland <samuel@sholland.org>

On a D1-Nezha
Tested-by: Heiko Stuebner <heiko@sntech.de>