Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
To:     broonie@kernel.org
Cc:     gregkh@linuxfoundation.org, rafael@kernel.org,
        andy.shevchenko@gmail.com, krzk@kernel.org,
        m.szyprowski@samsung.com, mazziesaccount@gmail.com,
        linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 06/12] regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
Date:   Sun,  3 Jul 2022 12:20:55 +0100
Message-Id: <20220703112101.24493-7-aidanmacdonald.0x0@gmail.com>
In-Reply-To: <20220703112101.24493-1-aidanmacdonald.0x0@gmail.com>
References: <20220703112101.24493-1-aidanmacdonald.0x0@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Commit a71411dbf6c8 ("regmap: irq: add chip option mask_writeonly")
introduced the mask_writeonly option, but it isn't used now and it
appears it's never been used by any in-tree drivers. The motivation
for the option is mentioned in the commit message,

    Some irq controllers have writeonly/multipurpose register
    layouts. In those cases we read invalid data back. [...]

The option causes mask register updates to use regmap_write_bits()
instead of regmap_update_bits().

However, regmap_write_bits() doesn't solve the reading invalid data
problem. It's still a read-modify-write op like regmap_update_bits().
The difference is that 'update bits' will only write the new value
if it is different from the current value, while 'write bits' will
write the new value unconditionally, even if it's the same as the
current value.

This seems like a bit of a specialized use case and probably isn't
that useful for regmap-irq, so let's just remove the option and go
back to using an 'update bits' op for the mask registers. We can
always add the option back if some driver ends up needing it in the
future.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
 drivers/base/regmap/regmap-irq.c | 24 +++++++-----------------
 include/linux/regmap.h           |  2 --
 2 files changed, 7 insertions(+), 19 deletions(-)

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index cb20ce6f91e7..7e93dd8af56b 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -80,16 +80,6 @@ static void regmap_irq_lock(struct irq_data *data)
 	mutex_lock(&d->lock);
 }
 
-static int regmap_irq_update_bits(struct regmap_irq_chip_data *d,
-				  unsigned int reg, unsigned int mask,
-				  unsigned int val)
-{
-	if (d->chip->mask_writeonly)
-		return regmap_write_bits(d->map, reg, mask, val);
-	else
-		return regmap_update_bits(d->map, reg, mask, val);
-}
-
 static void regmap_irq_sync_unlock(struct irq_data *data)
 {
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
@@ -130,11 +120,11 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 
 		reg = sub_irq_reg(d, d->chip->mask_base, i);
 		if (d->chip->mask_invert) {
-			ret = regmap_irq_update_bits(d, reg,
+			ret = regmap_update_bits(d->map, reg,
 					 d->mask_buf_def[i], ~d->mask_buf[i]);
 		} else if (d->chip->unmask_base) {
 			/* set mask with mask_base register */
-			ret = regmap_irq_update_bits(d, reg,
+			ret = regmap_update_bits(d->map, reg,
 					d->mask_buf_def[i], ~d->mask_buf[i]);
 			if (ret < 0)
 				dev_err(d->map->dev,
@@ -143,12 +133,12 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 			unmask_offset = d->chip->unmask_base -
 							d->chip->mask_base;
 			/* clear mask with unmask_base register */
-			ret = regmap_irq_update_bits(d,
+			ret = regmap_update_bits(d->map,
 					reg + unmask_offset,
 					d->mask_buf_def[i],
 					d->mask_buf[i]);
 		} else {
-			ret = regmap_irq_update_bits(d, reg,
+			ret = regmap_update_bits(d->map, reg,
 					 d->mask_buf_def[i], d->mask_buf[i]);
 		}
 		if (ret != 0)
@@ -763,17 +753,17 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 		reg = sub_irq_reg(d, d->chip->mask_base, i);
 
 		if (chip->mask_invert)
-			ret = regmap_irq_update_bits(d, reg,
+			ret = regmap_update_bits(d->map, reg,
 					 d->mask_buf[i], ~d->mask_buf[i]);
 		else if (d->chip->unmask_base) {
 			unmask_offset = d->chip->unmask_base -
 					d->chip->mask_base;
-			ret = regmap_irq_update_bits(d,
+			ret = regmap_update_bits(d->map,
 					reg + unmask_offset,
 					d->mask_buf[i],
 					d->mask_buf[i]);
 		} else
-			ret = regmap_irq_update_bits(d, reg,
+			ret = regmap_update_bits(d->map, reg,
 					 d->mask_buf[i], d->mask_buf[i]);
 		if (ret != 0) {
 			dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 106ca1172d3d..d21eb8ad2675 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1452,7 +1452,6 @@ struct regmap_irq_sub_irq_map {
  *
  * @status_base: Base status register address.
  * @mask_base:   Base mask register address.
- * @mask_writeonly: Base mask register is write only.
  * @unmask_base:  Base unmask register address. for chips who have
  *                separate mask and unmask registers
  * @ack_base:    Base ack address. If zero then the chip is clear on read.
@@ -1518,7 +1517,6 @@ struct regmap_irq_chip {
 	unsigned int type_base;
 	unsigned int *virt_reg_base;
 	unsigned int irq_reg_stride;
-	unsigned int mask_writeonly:1;
 	unsigned int init_ack_masked:1;
 	unsigned int mask_invert:1;
 	unsigned int use_ack:1;
-- 
2.35.1