Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220704172116.195841-1-marcus.folkesson@gmail.com> <20220704172116.195841-7-marcus.folkesson@gmail.com>
In-Reply-To: <20220704172116.195841-7-marcus.folkesson@gmail.com>
From:   Andy Shevchenko <andy.shevchenko@gmail.com>
Date:   Mon, 4 Jul 2022 23:57:37 +0200
Message-ID: <CAHp75VeqAJK_jBmF5zb3NACS0JJvzWQ8HAgpDFcXPAQiozp94g@mail.gmail.com>
Subject: Re: [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts
To:     Marcus Folkesson <marcus.folkesson@gmail.com>
Cc:     Kent Gustavsson <kent@minoris.se>,
        Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-iio <linux-iio@vger.kernel.org>,
        devicetree <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Mon, Jul 4, 2022 at 7:21 PM Marcus Folkesson
<marcus.folkesson@gmail.com> wrote:
>
> Make it possible to read values upon interrupts.
> Configure Data Ready Signal Output Pin to either HiZ or push-pull and
> use it as interrupt source.

...

> +               /*
> +                * The device generates interrupts as long as it is powered up.
> +                * Some platforms might not allow the option to power it down so
> +                * don't enable the interrupt to avoid extra load on the system

Missed period.

> +                */

-- 
With Best Regards,
Andy Shevchenko