Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
To:     Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Cc:     linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] leds: Add support for Turris 1.x LEDs
Date:   Tue,  5 Jul 2022 17:59:29 +0200
Message-Id: <20220705155929.25565-2-pali@kernel.org>
In-Reply-To: <20220705155929.25565-1-pali@kernel.org>
References: <20220705000448.14337-1-pali@kernel.org>
 <20220705155929.25565-1-pali@kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

This adds support for the RGB LEDs found on the front panel of the
Turris 1.x routers. There are 8 RGB LEDs that are controlled by
CZ.NIC CPLD firmware running on Lattice FPGA.

CPLD firmware provides HW triggering mode for all LEDs except WiFi LED
which is automatically enabled after power on reset. LAN LEDs share HW
registers for RGB colors settings, so it is not possible to set different
colors for individual LAN LEDs.

CZ.NIC CPLD firmware is open source and available at:
https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v

This driver uses the multicolor LED framework and HW led triggers.

Signed-off-by: Pali Rohár <pali@kernel.org>

---
Changes in v2:
* Use 0/1 instead of LED_OFF/LED_ON
* Add brightness_level device attribute
* Implement callback brightness_set instead of brightness_set_blocking
* Reset LEDs to default state before kernel reboots
---
 .../testing/sysfs-class-led-driver-turris1x   |  31 ++
 drivers/leds/Kconfig                          |   9 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-turris-1x.c                 | 474 ++++++++++++++++++
 4 files changed, 515 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-turris1x
 create mode 100644 drivers/leds/leds-turris-1x.c

diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-turris1x b/Documentation/ABI/testing/sysfs-class-led-driver-turris1x
new file mode 100644
index 000000000000..bb8b82b43165
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris1x
@@ -0,0 +1,31 @@
+What:		/sys/class/leds/<led>/device/brightness
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Pali Rohár <pali@kernel.org>
+Description:	(RW) On the back size of the Turris 1.x routers there is also
+		a button which can be used to control the intensity of all the
+		LEDs at once, so that if they are too bright, user can dim them.
+
+		The CPLD firmware cycles between 8 levels of this global
+		brightness (from 100% to 0%), but this setting can have any
+		integer value between 0 and 255. It is therefore convenient to be
+		able to change this setting from software.
+
+		Format: %u
+
+What:		/sys/class/leds/<led>/device/brightness_level
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Pali Rohár <pali@kernel.org>
+Description:	(RW) Current brightness level value (0-7).
+
+		Format: %u
+
+What:		/sys/class/leds/<led>/device/brightness_values
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Pali Rohár <pali@kernel.org>
+Description:	(RW) Values of all 8 levels between which CPLD firmware cycles
+		when brightness button is pressed.
+
+		Format: %u %u %u %u %u %u %u %u
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a49979f41eee..71caf45c8ac3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -157,6 +157,15 @@ config LEDS_EL15203000
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-el15203000.
 
+config LEDS_TURRIS_1X
+	tristate "LED support for CZ.NIC's Turris 1.x"
+	depends on LEDS_CLASS_MULTICOLOR
+	depends on OF
+	select LEDS_TRIGGERS
+	help
+	  This option enables support for LEDs found on the front side of
+	  CZ.NIC's Turris 1.x routers.
+
 config LEDS_TURRIS_OMNIA
 	tristate "LED support for CZ.NIC's Turris Omnia"
 	depends on LEDS_CLASS_MULTICOLOR
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 4fd2f92cd198..de08083dbbca 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_TI_LMU_COMMON)	+= leds-ti-lmu-common.o
 obj-$(CONFIG_LEDS_TLC591XX)		+= leds-tlc591xx.o
 obj-$(CONFIG_LEDS_TPS6105X)		+= leds-tps6105x.o
+obj-$(CONFIG_LEDS_TURRIS_1X)		+= leds-turris-1x.o
 obj-$(CONFIG_LEDS_TURRIS_OMNIA)		+= leds-turris-omnia.o
 obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
diff --git a/drivers/leds/leds-turris-1x.c b/drivers/leds/leds-turris-1x.c
new file mode 100644
index 000000000000..cf7567b64306
--- /dev/null
+++ b/drivers/leds/leds-turris-1x.c
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0
+// (C) 2022 Pali Rohár <pali@kernel.org>
+//
+// CZ.NIC's Turris 1.x LEDs driver, controlled by CPLD firmware:
+// https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v
+
+#include <linux/i2c.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include "leds.h"
+
+/* LED registers starts at byte 0x13 in CPLD memory map */
+#define TURRIS1X_LED_REG_OFF(reg) ((reg)-0x13)
+
+/* LEDs 1-5 share common register for setting brightness */
+#define TURRIS1X_LED_BRIGHTNESS_OFF(idx)	({ const u8 _idx = (idx) & 7; \
+						   (_idx == 0) ? 0 : \
+						   (_idx <= 5) ? 1 : \
+						   (_idx - 4); })
+
+#define TURRIS1X_LED_BRIGHTNESS_REG(idx, color)	TURRIS1X_LED_REG_OFF(0x13 + \
+						  3 * TURRIS1X_LED_BRIGHTNESS_OFF(idx) + \
+						  ((color) & 3))
+#define TURRIS1X_LED_GLOBAL_LEVEL_REG		TURRIS1X_LED_REG_OFF(0x20)
+#define TURRIS1X_LED_GET_GLOBAL_BRIGHTNESS_REG	TURRIS1X_LED_REG_OFF(0x21)
+#define TURRIS1X_LED_SW_OVERRIDE_REG		TURRIS1X_LED_REG_OFF(0x22)
+#define TURRIS1X_LED_SW_DISABLE_REG		TURRIS1X_LED_REG_OFF(0x23)
+#define TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(lvl)	TURRIS1X_LED_REG_OFF(0x28 + ((lvl) & 7))
+
+struct turris1x_led {
+	struct led_classdev_mc mc_cdev;
+	struct mc_subled subled_info[3];
+	u32 reg;
+	bool registered;
+};
+
+#define to_turris1x_led(l)	container_of(l, struct turris1x_led, mc_cdev)
+
+struct turris1x_leds {
+	void __iomem *regs;
+	struct mutex lock;
+	struct turris1x_led leds[8];
+};
+
+static struct led_hw_trigger_type turris1x_hw_trigger_type;
+
+static int turris1x_hwtrig_activate(struct led_classdev *cdev)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
+	struct turris1x_led *led = to_turris1x_led(lcdev_to_mccdev(cdev));
+	u8 val;
+
+	/* Disable software control of LED */
+	mutex_lock(&leds->lock);
+	val = readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+	val &= ~BIT(led->reg);
+	writeb(val, leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+	mutex_unlock(&leds->lock);
+
+	return 0;
+}
+
+static void turris1x_hwtrig_deactivate(struct led_classdev *cdev)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
+	struct turris1x_led *led = to_turris1x_led(lcdev_to_mccdev(cdev));
+	u8 val;
+
+	/* Enable software control of LED */
+	mutex_lock(&leds->lock);
+	val = readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+	val |= BIT(led->reg);
+	writeb(val, leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+	mutex_unlock(&leds->lock);
+}
+
+static struct led_trigger turris1x_hw_trigger = {
+	.name		= "turris1x-cpld",
+	.activate	= turris1x_hwtrig_activate,
+	.deactivate	= turris1x_hwtrig_deactivate,
+	.trigger_type	= &turris1x_hw_trigger_type,
+};
+
+static enum led_brightness turris1x_led_brightness_get(struct led_classdev *cdev)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+	struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
+	struct turris1x_led *led = to_turris1x_led(mc_cdev);
+
+	if (!(readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG) & BIT(led->reg)))
+		return 1;
+	else if (!(readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG) & BIT(led->reg)))
+		return 1;
+	else
+		return 0;
+}
+
+static void turris1x_led_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+	struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
+	struct turris1x_led *led = to_turris1x_led(mc_cdev);
+	int i, j;
+	u8 val;
+
+	mutex_lock(&leds->lock);
+
+	/* Set new brightness value for each color when LED is enabled */
+	if (brightness) {
+		led_mc_calc_color_components(mc_cdev, brightness);
+		for (i = 0; i < ARRAY_SIZE(led->subled_info); i++)
+			writeb(mc_cdev->subled_info[i].brightness,
+			       leds->regs + TURRIS1X_LED_BRIGHTNESS_REG(led->reg, i));
+
+		/*
+		 * LEDs 1-5 (LAN) share common color settings in same sets
+		 * of HW registers and therefore it is not possible to set
+		 * different colors. So when chaning color of one LED then
+		 * reflect color change for all of them.
+		 */
+		if (led->reg >= 1 && led->reg <= 5) {
+			for (j = 0; j < ARRAY_SIZE(leds->leds); j++) {
+				if (leds->leds[j].reg < 1 ||
+				    leds->leds[j].reg > 5 ||
+				    leds->leds[j].reg == led->reg)
+					continue;
+				for (i = 0; i < ARRAY_SIZE(led->subled_info); i++)
+					leds->leds[j].mc_cdev.subled_info[i].intensity =
+						mc_cdev->subled_info[i].intensity;
+			}
+		}
+	}
+
+	/* Enable / disable LED for software control */
+	val = readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+	if (brightness && (val & BIT(led->reg)))
+		writeb(val & ~BIT(led->reg),
+		       leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+	else if (!brightness && !(val & BIT(led->reg)))
+		writeb(val | BIT(led->reg),
+		       leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+
+	mutex_unlock(&leds->lock);
+}
+
+static int turris1x_led_register(struct device *dev, struct turris1x_leds *leds,
+				 struct device_node *np, u8 val_sw_override,
+				 u8 val_sw_disable)
+{
+	struct led_init_data init_data = {};
+	struct led_classdev *cdev;
+	struct turris1x_led *led;
+	int ret, color;
+	u32 reg;
+	int i;
+
+	const unsigned int colors[ARRAY_SIZE(led->subled_info)] = {
+		LED_COLOR_ID_RED, LED_COLOR_ID_GREEN, LED_COLOR_ID_BLUE
+	};
+
+	ret = of_property_read_u32(np, "reg", &reg);
+	if (ret || reg >= ARRAY_SIZE(leds->leds)) {
+		dev_err(dev,
+			"Node %pOF: must contain 'reg' property with values between 0 and %u\n",
+			np, (unsigned int)ARRAY_SIZE(leds->leds) - 1);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "color", &color);
+	if (ret || color != LED_COLOR_ID_RGB) {
+		dev_err(dev,
+			"Node %pOF: must contain 'color' property with value LED_COLOR_ID_RGB\n",
+			np);
+		return -EINVAL;
+	}
+
+	led = &leds->leds[reg];
+
+	if (led->registered) {
+		dev_err(dev, "Node %pOF: duplicate 'reg' property %u\n",
+			     np, reg);
+		return -EINVAL;
+	}
+
+	led->registered = true;
+	led->reg = reg;
+
+	/* Set initial colors to what are currently in use */
+	for (i = 0; i < ARRAY_SIZE(led->subled_info); i++) {
+		led->subled_info[i].intensity =
+			readb(leds->regs + TURRIS1X_LED_BRIGHTNESS_REG(reg, i));
+		led->subled_info[i].color_index = colors[i];
+		led->subled_info[i].channel = i;
+	}
+
+	led->mc_cdev.subled_info = led->subled_info;
+	led->mc_cdev.num_colors = ARRAY_SIZE(led->subled_info);
+
+	init_data.fwnode = &np->fwnode;
+
+	cdev = &led->mc_cdev.led_cdev;
+	cdev->max_brightness = 1;
+	cdev->brightness_get = turris1x_led_brightness_get;
+	cdev->brightness_set = turris1x_led_brightness_set;
+
+	/* All LEDs except LED 6 (WiFi) can be controller by hardware trigger */
+	if (reg != 6)
+		cdev->trigger_type = &turris1x_hw_trigger_type;
+
+	/* Disable hardware trigger for LED 6 (WiFi) - allow software control */
+	if (reg == 6 && !(val_sw_override & BIT(6))) {
+		if (!(val_sw_disable & BIT(6))) {
+			val_sw_disable |= BIT(6);
+			writeb(val_sw_disable,
+			       leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+		}
+		val_sw_override |= BIT(6);
+		writeb(val_sw_override,
+		       leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+	}
+
+	if (!(val_sw_override & BIT(reg)))
+		cdev->default_trigger = turris1x_hw_trigger.name;
+
+	if (!(val_sw_override & BIT(reg)) || !(val_sw_disable & BIT(reg)))
+		cdev->brightness = 1;
+
+	ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev,
+							&init_data);
+	if (ret) {
+		dev_err(dev, "Cannot register LED %pOF: %i\n", np, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
+			       char *buf)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(dev);
+	unsigned int brightness;
+
+	/*
+	 * Current brightness value is available in read-only register
+	 * TURRIS1X_LED_GET_GLOBAL_BRIGHTNESS_REG. Equivalent code is:
+	 * level = readb(leds->regs + TURRIS1X_LED_GLOBAL_LEVEL_REG) & 7;
+	 * brightness = readb(leds->regs + TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(level));
+	 */
+	brightness = readb(leds->regs + TURRIS1X_LED_GET_GLOBAL_BRIGHTNESS_REG);
+
+	return sprintf(buf, "%u\n", brightness);
+}
+
+static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
+				const char *buf, size_t count)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(dev);
+	int best_error, error, level, value;
+	unsigned long brightness;
+	u8 best_level;
+
+	if (kstrtoul(buf, 10, &brightness))
+		return -EINVAL;
+
+	if (brightness > 255)
+		return -EINVAL;
+
+	/*
+	 * Brightness can be set only to one of 8 predefined value levels
+	 * available in TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(level) registers.
+	 * Choose level which has nearest value to the specified brightness.
+	 */
+	best_level = 0;
+	best_error = INT_MAX;
+	for (level = 0; level < 8; level++) {
+		value = readb(leds->regs +
+			      TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(level));
+		error = abs(value - (int)brightness);
+		if (best_error > error) {
+			best_error = error;
+			best_level = level;
+		}
+	}
+
+	writeb(best_level, leds->regs + TURRIS1X_LED_GLOBAL_LEVEL_REG);
+
+	return count;
+}
+static DEVICE_ATTR_RW(brightness);
+
+static ssize_t brightness_level_show(struct device *dev,
+				     struct device_attribute *a, char *buf)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(dev);
+	unsigned int level;
+
+	level = readb(leds->regs + TURRIS1X_LED_GLOBAL_LEVEL_REG) & 7;
+
+	return sprintf(buf, "%u\n", level);
+}
+
+static ssize_t brightness_level_store(struct device *dev,
+				      struct device_attribute *a,
+				      const char *buf, size_t count)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(dev);
+	unsigned long level;
+
+	if (kstrtoul(buf, 10, &level))
+		return -EINVAL;
+
+	if (level > 7)
+		return -EINVAL;
+
+	writeb(level, leds->regs + TURRIS1X_LED_GLOBAL_LEVEL_REG);
+
+	return count;
+}
+static DEVICE_ATTR_RW(brightness_level);
+
+static ssize_t brightness_values_show(struct device *dev,
+				      struct device_attribute *a, char *buf)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(dev);
+	unsigned int vals[8];
+	int i;
+
+	for (i = 0; i < 8; i++)
+		vals[i] = readb(leds->regs +
+				TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(i));
+
+	return sprintf(buf, "%u %u %u %u %u %u %u %u\n", vals[0], vals[1],
+		       vals[2], vals[3], vals[4], vals[5], vals[6], vals[7]);
+}
+
+static ssize_t brightness_values_store(struct device *dev,
+				       struct device_attribute *a,
+				       const char *buf, size_t count)
+{
+	struct turris1x_leds *leds = dev_get_drvdata(dev);
+	unsigned int vals[8];
+	int nchars;
+	int i;
+
+	if (sscanf(buf, "%u %u %u %u %u %u %u %u%n", &vals[0], &vals[1],
+		   &vals[2], &vals[3], &vals[4], &vals[5], &vals[6], &vals[7],
+		   &nchars) != 8 || nchars + 1 < count)
+		return -EINVAL;
+
+	for (i = 0; i < 8; i++)
+		writeb(vals[i],
+		       leds->regs + TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(i));
+
+	return count;
+}
+static DEVICE_ATTR_RW(brightness_values);
+
+static struct attribute *turris1x_leds_controller_attrs[] = {
+	&dev_attr_brightness.attr,
+	&dev_attr_brightness_level.attr,
+	&dev_attr_brightness_values.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(turris1x_leds_controller);
+
+static int turris1x_leds_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev_of_node(dev);
+	struct device_node *child;
+	struct turris1x_leds *leds;
+	struct resource *res;
+	void __iomem *regs;
+	u8 val_sw_override;
+	u8 val_sw_disable;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, leds);
+
+	leds->regs = regs;
+	mutex_init(&leds->lock);
+
+	ret = devm_led_trigger_register(dev, &turris1x_hw_trigger);
+	if (ret) {
+		dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
+		return ret;
+	}
+
+	val_sw_override = readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+	val_sw_disable = readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+
+	for_each_available_child_of_node(np, child) {
+		ret = turris1x_led_register(dev, leds, child,
+					    val_sw_override, val_sw_disable);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	ret = devm_device_add_groups(dev, turris1x_leds_controller_groups);
+	if (ret) {
+		dev_err(dev, "Could not add attribute group!\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void turris1x_leds_shutdown(struct platform_device *pdev)
+{
+	struct turris1x_leds *leds = platform_get_drvdata(pdev);
+	int i, j;
+	u8 val;
+
+	/*
+	 * LED registers are persisent across board resets.
+	 * So reset LEDs to default state before kernel reboots.
+	 */
+
+	/* Disable software control of all LEDs except LED 6 (WiFi) */
+	writeb(BIT(6), leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
+
+	/* Turn off LED 6 (WiFi) as there is no hardware trigger for it */
+	val = readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+	writeb(val | BIT(6), leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
+
+	/* Reset colors of all LEDs to default values */
+	for (i = 0; i < ARRAY_SIZE(leds->leds); i++) {
+		/* Skip LAN2-LAN5 LEDs which share color register with LAN1 */
+		if (i >= 2 && i <= 5)
+			continue;
+		for (j = 0; j < ARRAY_SIZE(leds->leds[i].subled_info); j++)
+			writeb(0xff,
+			       leds->regs + TURRIS1X_LED_BRIGHTNESS_REG(i, j));
+	}
+}
+
+static const struct of_device_id of_turris1x_leds_match[] = {
+	{ .compatible = "cznic,turris1x-leds" },
+	{},
+};
+
+static struct platform_driver turris1x_leds_driver = {
+	.probe = turris1x_leds_probe,
+	.shutdown = turris1x_leds_shutdown,
+	.driver = {
+		.name = "turris1x_leds",
+		.of_match_table = of_turris1x_leds_match,
+	},
+};
+module_platform_driver(turris1x_leds_driver);
+
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("CZ.NIC's Turris 1.x LEDs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:turris1x_leds");
-- 
2.20.1