Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <eadf03c4-7e4c-e2a0-b20d-6e2dff3af1e3@somainline.org>
Date:   Wed, 6 Jul 2022 15:04:44 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.11.0
Subject: Re: [PATCH 06/13] ARM: dts: qcom: enable usb phy by default for
 ipq8064
Content-Language: en-US
To:     Christian Marangi <ansuelsmth@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Jonathan McDowell <noodles@earth.li>
References: <20220705133917.8405-1-ansuelsmth@gmail.com>
 <20220705133917.8405-7-ansuelsmth@gmail.com>
From:   Konrad Dybcio <konrad.dybcio@somainline.org>
In-Reply-To: <20220705133917.8405-7-ansuelsmth@gmail.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 5.07.2022 15:39, Christian Marangi wrote:
> Enable usb phy by default. When the usb phy were pushed, half of them
> were flagged as disabled by mistake. Fix this to correctly init dwc3
> node on any ipq8064 based SoC.
Are you sure they are used on *all* devices? If not, you will
lose power by enabling unused hw..

Konrad
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> Tested-by: Jonathan McDowell <noodles@earth.li>
> ---
>  arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index b2faa4a067e9..9c32c637ea46 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -1177,8 +1177,6 @@ hs_phy_0: phy@100f8800 {
>  			clocks = <&gcc USB30_0_UTMI_CLK>;
>  			clock-names = "ref";
>  			#phy-cells = <0>;
> -
> -			status = "disabled";
>  		};
>  
>  		ss_phy_0: phy@100f8830 {
> @@ -1187,8 +1185,6 @@ ss_phy_0: phy@100f8830 {
>  			clocks = <&gcc USB30_0_MASTER_CLK>;
>  			clock-names = "ref";
>  			#phy-cells = <0>;
> -
> -			status = "disabled";
>  		};
>  
>  		usb3_0: usb3@100f8800 {