Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rob Herring <robh@kernel.org>
To:     Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Cc:     nicolas.ferre@microchip.com, robh+dt@kernel.org,
        alexandre.belloni@bootlin.com, linux-kernel@vger.kernel.org,
        Kavyasree.Kotagiri@microchip.com, UNGLinuxDriver@microchip.com,
        krzysztof.kozlowski+dt@linaro.org,
        linux-arm-kernel@lists.infradead.org, claudiu.beznea@microchip.com,
        devicetree@vger.kernel.org
In-Reply-To: <20220706110619.71729-2-kavyasree.kotagiri@microchip.com>
References: <20220706110619.71729-1-kavyasree.kotagiri@microchip.com> <20220706110619.71729-2-kavyasree.kotagiri@microchip.com>
Subject: Re: [PATCH v7 1/3] dt-bindings: mfd: Convert atmel-flexcom to json-schema
Date:   Wed, 06 Jul 2022 07:29:04 -0600
Message-Id: <1657114144.966195.4099936.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Wed, 06 Jul 2022 09:06:17 -0200, Kavyasree Kotagiri wrote:
> Convert the Atmel flexcom device tree bindings to json schema.
> 
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> ---
> v6 -> v7:
>  - Change filename to atmel,sama5d2-flexcom.yaml
>  - Add #address-cells, #size-cells to flexcom node - Fixed warnings.
> 
> v5 -> v6:
>  - Removed spi node from example as suggested by Rob and
>    also pattern properties(spi dt-bindings conversion to yaml patch is under review).
>    Once that is accepted, I will add back spi example through new patch.
> 
> v4 -> v5:
>  - Fixed indentations.
> 
> v3 -> v4:
>  - Corrected format of enum used for compatible string.
> 
> v2 -> v3:
>  - used enum for compatible string.
>  - changed irq flag to IRQ_TYPE_LEVEL_HIGH in example.
>  - fixed dtschema errors.
> 
> v1 -> v2:
>  - Fix title.
> 
>  .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 74 +++++++++++++++++++
>  .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ----------------
>  2 files changed, 74 insertions(+), 63 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


flexcom@e0040000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
	arch/arm/boot/dts/lan966x-pcb8291.dtb

flexcom@e0044000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
	arch/arm/boot/dts/lan966x-pcb8291.dtb

flexcom@e0060000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
	arch/arm/boot/dts/lan966x-pcb8291.dtb

flexcom@e0064000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
	arch/arm/boot/dts/lan966x-pcb8291.dtb

flexcom@e0070000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
	arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
	arch/arm/boot/dts/lan966x-pcb8291.dtb

flexcom@e1818000: 'serial@200' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e181c000: 'i2c@600' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e1824000: 'serial@200' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e2018000: 'serial@200' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e2024000: 'serial@200' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e2818000: 'i2c@600' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e281c000: 'i2c@600' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@e2824000: 'spi@400' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sama7g5ek.dtb

flexcom@f0000000: 'spi@400' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sam9x60ek.dtb

flexcom@f0004000: 'serial@200' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sam9x60ek.dtb

flexcom@f8010000: 'i2c@600' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sam9x60ek.dtb

flexcom@f801c000: 'i2c@600' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-sam9x60ek.dtb

flexcom@f8034000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-kizbox3-hs.dtb
	arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb
	arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_icp.dtb
	arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_xplained.dtb

flexcom@f8038000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-kizbox3-hs.dtb
	arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb
	arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_icp.dtb
	arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_xplained.dtb

flexcom@fc010000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-kizbox3-hs.dtb
	arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb
	arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_icp.dtb
	arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_xplained.dtb

flexcom@fc014000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-kizbox3-hs.dtb
	arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb
	arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_icp.dtb
	arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_xplained.dtb

flexcom@fc018000: 'i2c@600', 'serial@200', 'spi@400' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/at91-kizbox3-hs.dtb
	arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb
	arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_icp.dtb
	arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb
	arch/arm/boot/dts/at91-sama5d2_xplained.dtb