Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 7 Jul 2022 18:54:56 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     Robert Marko <robimarko@gmail.com>
Cc:     agross@kernel.org, bjorn.andersson@linaro.org,
        konrad.dybcio@somainline.org, lee.jones@linaro.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        linus.walleij@linaro.org, lgirdwood@gmail.com, broonie@kernel.org,
        lars@metafoo.de, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-iio@vger.kernel.org
Subject: Re: [PATCH v6 10/12] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC
 to rev2 ADC5
Message-ID: <20220707185456.45ff3958@jic23-huawei>
In-Reply-To: <20220704212402.1715182-10-robimarko@gmail.com>
References: <20220704212402.1715182-1-robimarko@gmail.com>
        <20220704212402.1715182-10-robimarko@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Mon,  4 Jul 2022 23:24:00 +0200
Robert Marko <robimarko@gmail.com> wrote:

> Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list.
> This channel measures the VADC reference LDO output.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

I'm assuming this will go in via MFD. Shout if I should pick it up
directly.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index 87438d1e5c0b..7bd3745884f0 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -589,6 +589,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
>  					SCALE_HW_CALIB_DEFAULT)
> +	[ADC5_VREF_VADC]	= ADC5_CHAN_VOLT("vref_vadc", 0,
> +					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,