Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Yu Tu <yu.tu@amlogic.com>
To:     <linux-clk@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-amlogic@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        "Neil Armstrong" <narmstrong@baylibre.com>,
        Jerome Brunet <jbrunet@baylibre.com>,
        Kevin Hilman <khilman@baylibre.com>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
CC:     Yu Tu <yu.tu@amlogic.com>
Subject: [PATCH 2/3] arm64: dts: meson: add S4 Soc clock controller in DT
Date:   Fri, 8 Jul 2022 14:27:56 +0800
Message-ID: <20220708062757.3662-3-yu.tu@amlogic.com>
In-Reply-To: <20220708062757.3662-1-yu.tu@amlogic.com>
References: <20220708062757.3662-1-yu.tu@amlogic.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

Added information about the S4 SOC Clock controller in DT.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index ff213618a598..ad2ec26a1f4a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -86,7 +86,7 @@ gic: interrupt-controller@fff01000 {
 		};
 
 		apb4: apb4@fe000000 {
-			compatible = "simple-bus";
+			compatible = "simple-bus", "syscon";
 			reg = <0x0 0xfe000000 0x0 0x480000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -118,6 +118,13 @@ gpio_intc: interrupt-controller@4080 {
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
+			clkc: clock-controller {
+				compatible = "amlogic,s4-clkc";
+				#clock-cells = <1>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+			};
+
 			uart_B: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
-- 
2.33.1