Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To:     <krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
        <heikki.krogerus@linux.intel.com>, <gregkh@linuxfoundation.org>
CC:     <christophe.jaillet@wanadoo.fr>, <devicetree@vger.kernel.org>,
        <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <amelie.delaunay@foss.st.com>, <alexandre.torgue@foss.st.com>,
        <fabrice.gasnier@foss.st.com>
Subject: [PATCH v2 0/4] usb: typec: ucsi: add support for stm32g0
Date:   Mon, 11 Jul 2022 13:48:27 +0200
Message-ID: <20220711114831.25205-1-fabrice.gasnier@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

STM32G0 provides an integrated USB Type-C and power delivery interface [1].
It can be programmed with a firmware [2] to act as a PPM. Currently it
implements UCSI protocol over I2C interface. A GPIO is used as an interrupt
line.

This series adds a driver to support it, including:
- dt-bindings documentation
- optional STM32G0 firmware control and update, over a secondary I2C address
- power management

[1] https://wiki.st.com/stm32mcu/wiki/Introduction_to_USB_Power_Delivery_with_STM32
[2] https://github.com/STMicroelectronics/x-cube-ucsi

Changes in v2:
- Krzysztof's review comments on dt-bindings: update commit message, use ports,
  use unevaluatedProperties: false for usb-connector schema, define maxItems
  for power-domains, adopt generic node names, remove quotes.
- Christophe's comments on driver:
  use kmalloc instead of kzalloc
  Use-after-free of buf: directly print the offset

Fabrice Gasnier (4):
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: stm32g0: add support for stm32g0 i2c controller
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for power management

 .../bindings/usb/st,typec-stm32g0.yaml        |  90 ++
 drivers/usb/typec/ucsi/Kconfig                |  10 +
 drivers/usb/typec/ucsi/Makefile               |   1 +
 drivers/usb/typec/ucsi/ucsi_stm32g0.c         | 777 ++++++++++++++++++
 4 files changed, 878 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
 create mode 100644 drivers/usb/typec/ucsi/ucsi_stm32g0.c

-- 
2.25.1