Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <b8297d50-99e0-ef42-473d-a1167d46276e@foss.st.com>
Date:   Mon, 11 Jul 2022 14:03:03 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.9.1
Subject: Re: [PATCH v2 0/4] usb: typec: ucsi: add support for stm32g0
Content-Language: en-US
To:     <krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
        <heikki.krogerus@linux.intel.com>, <gregkh@linuxfoundation.org>
CC:     <christophe.jaillet@wanadoo.fr>, <devicetree@vger.kernel.org>,
        <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <amelie.delaunay@foss.st.com>, <alexandre.torgue@foss.st.com>
References: <20220711114831.25205-1-fabrice.gasnier@foss.st.com>
From:   Fabrice Gasnier <fabrice.gasnier@foss.st.com>
In-Reply-To: <20220711114831.25205-1-fabrice.gasnier@foss.st.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi all,

I just resent the full series as I got some issues with my mailer.
Sorry for the noise, please drop this one.

Best Regards,
Fabrice

On 7/11/22 13:48, Fabrice Gasnier wrote:
> STM32G0 provides an integrated USB Type-C and power delivery interface [1].
> It can be programmed with a firmware [2] to act as a PPM. Currently it
> implements UCSI protocol over I2C interface. A GPIO is used as an interrupt
> line.
> 
> This series adds a driver to support it, including:
> - dt-bindings documentation
> - optional STM32G0 firmware control and update, over a secondary I2C address
> - power management
> 
> [1] https://wiki.st.com/stm32mcu/wiki/Introduction_to_USB_Power_Delivery_with_STM32
> [2] https://github.com/STMicroelectronics/x-cube-ucsi
> 
> Changes in v2:
> - Krzysztof's review comments on dt-bindings: update commit message, use ports,
>   use unevaluatedProperties: false for usb-connector schema, define maxItems
>   for power-domains, adopt generic node names, remove quotes.
> - Christophe's comments on driver:
>   use kmalloc instead of kzalloc
>   Use-after-free of buf: directly print the offset
> 
> Fabrice Gasnier (4):
>   dt-bindings: usb: typec: add bindings for stm32g0 controller
>   usb: typec: ucsi: stm32g0: add support for stm32g0 i2c controller
>   usb: typec: ucsi: stm32g0: add bootloader support
>   usb: typec: ucsi: stm32g0: add support for power management
> 
>  .../bindings/usb/st,typec-stm32g0.yaml        |  90 ++
>  drivers/usb/typec/ucsi/Kconfig                |  10 +
>  drivers/usb/typec/ucsi/Makefile               |   1 +
>  drivers/usb/typec/ucsi/ucsi_stm32g0.c         | 777 ++++++++++++++++++
>  4 files changed, 878 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
>  create mode 100644 drivers/usb/typec/ucsi/ucsi_stm32g0.c
>