Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220711104719.40939-1-robimarko@gmail.com> <20220711104719.40939-6-robimarko@gmail.com>
 <CAA8EJppAdwuXQsvvy9+hT_-mzke5xOaDcTSM5ewjS_cPk3Q+oA@mail.gmail.com>
In-Reply-To: <CAA8EJppAdwuXQsvvy9+hT_-mzke5xOaDcTSM5ewjS_cPk3Q+oA@mail.gmail.com>
From:   Robert Marko <robimarko@gmail.com>
Date:   Mon, 11 Jul 2022 14:55:11 +0200
Message-ID: <CAOX2RU6FMyzGGpnLtzRy=szjBSE+wcvbs+6z6ChZ5Z6g4-9Baw@mail.gmail.com>
Subject: Re: [PATCH 6/6] clk: qcom: apss-ipq-pll: add support for IPQ8074
To:     Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        krzysztof.kozlowski+dt@linaro.org, sivaprak@codeaurora.org,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        linux-clk@vger.kernel.org,
        Devicetree List <devicetree@vger.kernel.org>,
        open list <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Mon, 11 Jul 2022 at 14:51, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Mon, 11 Jul 2022 at 14:22, Robert Marko <robimarko@gmail.com> wrote:
> >
> > Add support for IPQ8074 since it uses the same PLL setup, however it does
> > not require the Alpha PLL to be reconfigured.
> >
> > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > ---
> >  drivers/clk/qcom/apss-ipq-pll.c | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > index bef7899ad0d6..acfb3ec4f142 100644
> > --- a/drivers/clk/qcom/apss-ipq-pll.c
> > +++ b/drivers/clk/qcom/apss-ipq-pll.c
> > @@ -55,6 +55,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
> >  static int apss_ipq_pll_probe(struct platform_device *pdev)
> >  {
> >         struct device *dev = &pdev->dev;
> > +       struct device_node *node = dev->of_node;
> >         struct regmap *regmap;
> >         void __iomem *base;
> >         int ret;
> > @@ -67,7 +68,8 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> >         if (IS_ERR(regmap))
> >                 return PTR_ERR(regmap);
> >
> > -       clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
> > +       if (of_device_is_compatible(node, "qcom,ipq6018-a53pll"))
> > +               clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
>
> I'd suggest having the 8074 config here too. It seems logical to me to
> make sure that the pll is configured correctly.

Hi,

I have reworked the driver to use match data so it can be easily provided,
However, I dont have it as the downstream QCA kernel does not
reconfigure the PLL, unlike IPQ6018.
I can probably read the registers from a running board and provide that?

Regards,
Robert
>
> >
> >         ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
> >         if (ret)
> > @@ -79,6 +81,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> >
> >  static const struct of_device_id apss_ipq_pll_match_table[] = {
> >         { .compatible = "qcom,ipq6018-a53pll" },
> > +       { .compatible = "qcom,ipq8074-a53pll" },
> >         { }
> >  };
> >  MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
> > --
> > 2.36.1
> >
>
>
> --
> With best wishes
> Dmitry