Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 13 Jul 2022 11:45:54 -0500
From:   Bjorn Helgaas <helgaas@kernel.org>
To:     Richard Zhu <hongxing.zhu@nxp.com>
Cc:     l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
        broonie@kernel.org, lorenzo.pieralisi@arm.com, festevam@gmail.com,
        francesco.dolcini@toradex.com, linux-pci@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH v14 0/17] PCI: imx6: refine codes and add the error
 propagation
Message-ID: <20220713164554.GA833183@bhelgaas>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220711222959.GA701423@bhelgaas>
Precedence: bulk

On Mon, Jul 11, 2022 at 05:29:59PM -0500, Bjorn Helgaas wrote:
> On Fri, Jul 01, 2022 at 11:25:18AM +0800, Richard Zhu wrote:
> > ...

> > Bjorn Helgaas (5):
> >   PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type()
> >     earlier
> >   PCI: imx6: Move PHY management functions together
> >   PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
> >   PCI: imx6: Factor out ref clock disable to match enable
> >   PCI: imx6: Disable clocks in reverse order of enable
> > 
> > Richard Zhu (12):
> >   PCI: imx6: Move imx6_pcie_clk_disable() earlier
> >   PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
> >   PCI: imx6: Propagate .host_init() errors to caller
> >   PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
> >   PCI: imx6: Call host init function directly in resume
> >   PCI: imx6: Turn off regulator when system is in suspend mode
> >   PCI: imx6: Move regulator enable out of
> >     imx6_pcie_deassert_core_reset()
> >   PCI: imx6: Mark the link down as non-fatal error
> >   PCI: imx6: Reduce resume time by only starting link if it was up
> >     before suspend
> >   PCI: imx6: Do not hide phy driver callbacks and refine the error
> >     handling
> >   PCI: imx6: Reformat suspend callback to keep symmetric with resume
> >   PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
> > 
> > drivers/pci/controller/dwc/pci-imx6.c | 661 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------------------------------
> > 1 file changed, 358 insertions(+), 303 deletions(-)
> 
> Applied to pci/ctrl/imx6 for v5.20, thanks a lot for all your work
> here!

I updated the branch with Lucas' acks and with the minor
imx6_pcie_start_link() return value check he suggested.

I did not do anything about the missing IMX8MQ case in
imx6_pcie_ltssm_disable() or the PHY init or regulator or shutdown
issues.  If you want changes there, please make them starting with the
pci/ctrl/imx6 branch and I can just replace it:

  https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?h=pci/ctrl/imx6&id=7d652ce95e70

Bjorn