Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   cy_huang <u0084500@gmail.com>
To:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        lee.jones@linaro.org, broonie@kernel.org, dmitry.torokhov@gmail.com
Cc:     lgirdwood@gmail.com, cy_huang@richtek.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-input@vger.kernel.org
Subject: [PATCH v3 3/3] input: misc: rt5120: Add power key support
Date:   Thu, 14 Jul 2022 14:42:17 +0800
Message-Id: <1657780937-20891-4-git-send-email-u0084500@gmail.com>
In-Reply-To: <1657780937-20891-1-git-send-email-u0084500@gmail.com>
References: <1657780937-20891-1-git-send-email-u0084500@gmail.com>
Precedence: bulk

From: ChiYuan Huang <cy_huang@richtek.com>

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
Since v3:
- Simplify the power key irq handler key report
- Since press and release irq not needed to keep in private data, change 'press',
  'release' irq as local variable only.
- Fix Kconfig typo for pwrkey.

---
 drivers/input/misc/Kconfig         |   9 ++++
 drivers/input/misc/Makefile        |   1 +
 drivers/input/misc/rt5120-pwrkey.c | 105 +++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 drivers/input/misc/rt5120-pwrkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index a18ab73..92daa4d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -891,6 +891,15 @@ config INPUT_SC27XX_VIBRA
 	  To compile this driver as a module, choose M here. The module will
 	  be called sc27xx_vibra.
 
+config INPUT_RT5120_PWRKEY
+	tristate "RT5120 PMIC power key support"
+	depends on MFD_RT5120
+	help
+	  This enables support for RT5120 PMIC power key driver.
+
+	  To compile this driver as a module, choose M here. the module will
+	  be called rt5120-pwrkey.
+
 config INPUT_STPMIC1_ONKEY
 	tristate "STPMIC1 PMIC Onkey support"
 	depends on MFD_STPMIC1
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 28dfc44..d1fb00e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_INPUT_RAVE_SP_PWRBUTTON)	+= rave-sp-pwrbutton.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_REGULATOR_HAPTIC)	+= regulator-haptic.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
+obj-$(CONFIG_INPUT_RT5120_PWRKEY)	+= rt5120-pwrkey.o
 obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_RK805_PWRKEY)	+= rk805-pwrkey.o
diff --git a/drivers/input/misc/rt5120-pwrkey.c b/drivers/input/misc/rt5120-pwrkey.c
new file mode 100644
index 00000000..b6a5ac4
--- /dev/null
+++ b/drivers/input/misc/rt5120-pwrkey.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bits.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define RT5120_REG_INTSTAT	0x1E
+#define RT5120_PWRKEYSTAT_MASK	BIT(7)
+
+struct rt5120_priv {
+	struct regmap *regmap;
+	struct input_dev *input;
+};
+
+static irqreturn_t rt5120_pwrkey_handler(int irq, void *devid)
+{
+	struct rt5120_priv *priv = devid;
+	unsigned int stat;
+	int ret;
+
+	ret = regmap_read(priv->regmap, RT5120_REG_INTSTAT, &stat);
+	if (ret)
+		return IRQ_NONE;
+
+	input_report_key(priv->input, KEY_POWER,
+			 !(stat & RT5120_PWRKEYSTAT_MASK));
+	input_sync(priv->input);
+
+	return IRQ_HANDLED;
+}
+
+static int rt5120_pwrkey_probe(struct platform_device *pdev)
+{
+	struct rt5120_priv *priv;
+	struct device *dev = &pdev->dev;
+	int press_irq, release_irq;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n");
+
+	press_irq = platform_get_irq_byname(pdev, "pwrkey-press");
+	if (press_irq < 0)
+		return press_irq;
+
+	release_irq = platform_get_irq_byname(pdev, "pwrkey-release");
+	if (release_irq < 0)
+		return release_irq;
+
+	/* Make input device be device resource managed */
+	priv->input = devm_input_allocate_device(dev);
+	if (!priv->input)
+		return dev_err_probe(dev, -ENOMEM,
+				     "Failed to allocate input device\n");
+
+	priv->input->name = "rt5120_pwrkey";
+	priv->input->phys = "rt5120_pwrkey/input0";
+	priv->input->id.bustype = BUS_I2C;
+	input_set_capability(priv->input, EV_KEY, KEY_POWER);
+
+	ret = input_register_device(priv->input);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register input device\n");
+
+	ret = devm_request_threaded_irq(dev, press_irq, NULL,
+					rt5120_pwrkey_handler, 0,
+					"pwrkey-press", priv);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register pwrkey press irq\n");
+
+	return devm_request_threaded_irq(dev, release_irq, NULL,
+					 rt5120_pwrkey_handler, 0,
+					 "pwrkey-release", priv);
+}
+
+static const struct of_device_id r5120_pwrkey_match_table[] = {
+	{ .compatible = "richtek,rt5120-pwrkey" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, r5120_pwrkey_match_table);
+
+static struct platform_driver rt5120_pwrkey_driver = {
+	.driver = {
+		.name = "rt5120-pwrkey",
+		.of_match_table = r5120_pwrkey_match_table,
+	},
+	.probe = rt5120_pwrkey_probe,
+};
+module_platform_driver(rt5120_pwrkey_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RT5120 power key driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4