Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Tomer Maimon <tmaimon77@gmail.com>
To:     <avifishman70@gmail.com>, <tali.perry1@gmail.com>,
        <joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
        <benjaminfair@google.com>, <linus.walleij@linaro.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <j.neuschaefer@gmx.net>, <zhengbin13@huawei.com>
CC:     <openbmc@lists.ozlabs.org>, <linux-gpio@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v2 1/2] dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation
Date:   Thu, 14 Jul 2022 15:23:21 +0300
Message-ID: <20220714122322.63663-2-tmaimon77@gmail.com>
In-Reply-To: <20220714122322.63663-1-tmaimon77@gmail.com>
References: <20220714122322.63663-1-tmaimon77@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX
pinmux and GPIO controller.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 .../pinctrl/nuvoton,npcm845-pinctrl.yaml      | 213 ++++++++++++++++++
 1 file changed, 213 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
new file mode 100644
index 000000000000..104766f7acc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM845 Pin Controller and GPIO
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
+  the multiplexing block, Each pin supports GPIO functionality (GPIOx)
+  and multiple functions that directly connect the pin to different
+  hardware blocks.
+
+properties:
+  compatible:
+    const: nuvoton,npcm845-pinctrl
+
+  ranges:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
+patternProperties:
+  "^gpio@":
+    type: object
+
+    description:
+      Eight GPIO banks that each contain between 32 GPIOs.
+
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - reg
+      - interrupts
+      - gpio-ranges
+
+  "-mux":
+    $ref: pinmux-node.yaml#
+
+    properties:
+      groups:
+        description:
+          One or more groups of pins to mux to a certain function
+        items:
+          enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
+                  smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
+                  smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
+                  smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
+                  spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
+                  bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
+                  rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
+                  fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
+                  fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
+                  r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
+                  rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
+                  smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
+                  smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
+                  pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
+                  serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
+                  spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
+                  smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
+                  smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
+                  hgpio4, hgpio5, hgpio6, hgpio7 ]
+
+      function:
+        description:
+          The function that a group of pins is muxed to
+        enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
+                smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
+                smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
+                smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
+                spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
+                bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
+                rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
+                fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
+                fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
+                r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
+                rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
+                smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
+                smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
+                pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
+                serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
+                spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
+                smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
+                smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
+                hgpio4, hgpio5, hgpio6, hgpio7 ]
+
+    dependencies:
+      groups: [ function ]
+      function: [ groups ]
+
+    additionalProperties: false
+
+  "^pin":
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          A list of pins to configure in certain ways, such as enabling
+          debouncing
+
+      bias-disable: true
+
+      bias-pull-up: true
+
+      bias-pull-down: true
+
+      input-enable: true
+
+      output-low: true
+
+      output-high: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      input-debounce:
+        description:
+          Debouncing periods in microseconds, one period per interrupt
+          bank found in the controller
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+
+      slew-rate:
+        description: |
+          0: Low rate
+          1: High rate
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      drive-strength:
+        enum: [ 0, 1, 2, 4, 8, 12 ]
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - nuvoton,sysgcr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pinctrl: pinctrl@f0800000 {
+        compatible = "nuvoton,npcm845-pinctrl";
+        ranges = <0x0 0x0 0xf0010000 0x8000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        nuvoton,sysgcr = <&gcr>;
+
+        gpio0: gpio@f0010000 {
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x0 0xB0>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+          gpio-ranges = <&pinctrl 0 0 32>;
+        };
+
+        fanin0_pin: fanin0-mux {
+          groups = "fanin0";
+          function = "fanin0";
+        };
+
+        pin34_slew: pin34-slew {
+          pins = "GPIO34/I3C4_SDA";
+          bias-disable;
+        };
+      };
+    };
+
-- 
2.33.0