Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Content-Type: text/plain;
        charset=utf-8
Mime-Version: 1.0 (Mac OS X Mail 16.0 \(3696.100.31\))
Subject: [PATCH v4] arm64: dts: rockchip: Fix SD card init on rk3399-nanopi4
From:   =?utf-8?Q?Christian_Kohlsch=C3=BCtter?= 
        <christian@kohlschutter.com>
In-Reply-To: <449292CA-CE60-4B90-90F7-295FBFEAB3F8@kohlschutter.com>
Date:   Fri, 15 Jul 2022 19:12:11 +0200
Cc:     linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@lists.infradead.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        Linux MMC List <linux-mmc@vger.kernel.org>
Content-Transfer-Encoding: quoted-printable
Message-Id: <73F9AED0-D2A8-4294-B6E1-1B92D2A36529@kohlschutter.com>
References: <C639AD88-77A1-4485-BAEA-2FF8FC15A844@kohlschutter.com>
 <12878108.O9o76ZdvQC@diego> <103b714c-b07c-f016-1062-84bd94786b22@arm.com>
 <9AF1E75F-5947-49B0-887D-82C426527B99@kohlschutter.com>
 <590f7a08-a6ca-be54-4254-363343642a52@arm.com>
 <A6B896E5-CD25-4441-B6A5-0BE1FA284B2C@kohlschutter.com>
 <A9634366-A012-43D2-B253-8BB9BF6005C7@kohlschutter.com>
 <CAGb2v65Ehbu1wrib2CzF1fDZuD3fHZQDhKfVusyUF9KnxTvi+Q@mail.gmail.com>
 <5ca9bd94-54d9-04f8-0098-a56ffb6f5fe1@arm.com>
 <502b3fbe-3077-407e-6010-a8cb3ffce7d6@arm.com>
 <449292CA-CE60-4B90-90F7-295FBFEAB3F8@kohlschutter.com>
To:     Robin Murphy <robin.murphy@arm.com>, wens@kernel.org,
        =?utf-8?Q?Heiko_St=C3=BCbner?= <heiko@sntech.de>,
        Markus Reichl <m.reichl@fivetechno.de>
Precedence: bulk

mmc/SD-card initialization may fail on NanoPi R4S with
"mmc1: problem reading SD Status register" /
"mmc1: error -110 whilst initialising SD card"
either on cold boot or after a reboot.

Moreover, the system would also sometimes hang upon reboot.

This is prevented by setting an explicit undervoltage protection limit
for the SD-card-specific vcc3v0_sd voltage regulator.

Set the undervoltage protection limit to 2.7V, which is the minimum
permissible SD card operating voltage.

Signed-off-by: Christian Kohlsch=C3=BCtter <christian@kohlschutter.com>
---
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 4 ++++
1 file changed, 4 insertions(+)
mode change 100644 =3D> 100755 =
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi =
b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
old mode 100644
new mode 100755
index 8c0ff6c96e03..669c74ce4d13
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -73,6 +73,10 @@ vcc3v0_sd: vcc3v0-sd {
		regulator-always-on;
		regulator-min-microvolt =3D <3000000>;
		regulator-max-microvolt =3D <3000000>;
+
+		// must be configured or SD card may fail to initialize =
occasionally
+		regulator-uv-protection-microvolt =3D <2700000>;
+
		regulator-name =3D "vcc3v0_sd";
		vin-supply =3D <&vcc3v3_sys>;
	};
--=20
2.36.1=