Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Christian Marangi <ansuelsmth@gmail.com>
To:     Giuseppe Cavallaro <peppe.cavallaro@st.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Jose Abreu <joabreu@synopsys.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Russell King <linux@armlinux.org.uk>, netdev@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Christian Marangi <ansuelsmth@gmail.com>
Subject: [net-next PATCH v3 0/5] Add MTU change with stmmac interface running
Date:   Sun, 17 Jul 2022 01:07:57 +0200
Message-Id: <20220716230802.20788-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This series is to permit MTU change while the interface is running.
Major rework are needed to permit to allocate a new dma conf based on
the new MTU before applying it. This is to make sure there is enough
space to allocate all the DMA queue before releasing the stmmac driver.

This was tested with a simple way to stress the network while the
interface is running.

2 ssh connection to the device:
- One generating simple traffic with while true; do free; done
- The other making the mtu change with a delay of 1 second

The connection is correctly stopped and recovered after the MTU is changed.

The first 2 patch of this series are minor fixup that fix problems
presented while testing this. One fix a problem when we renable a queue
while we are generating a new dma conf. The other is a corner case that
was notice while stressing the driver and turning down the interface while
there was some traffic.

(this is a follow-up of a simpler patch that wanted to add the same
feature. It was suggested to first try to check if it was possible to
apply the new configuration. Posting as RFC as it does major rework for
the new concept of DMA conf)

v3:
- Fix compilation error reported by kernel test bot
  (missing dma_confg changes to tc and selftest source)
v2:
- Put it out of RFC

Christian Marangi (5):
  net: ethernet: stmicro: stmmac: move queue reset to dedicated
    functions
  net: ethernet: stmicro: stmmac: first disable all queues in release
  net: ethernet: stmicro: stmmac: move dma conf to dedicated struct
  net: ethernet: stmicro: stmmac: generate stmmac dma conf before open
  net: ethernet: stmicro: stmmac: permit MTU change with interface up

 .../net/ethernet/stmicro/stmmac/chain_mode.c  |   6 +-
 .../net/ethernet/stmicro/stmmac/ring_mode.c   |   4 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  21 +-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   4 +-
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 722 +++++++++++-------
 .../stmicro/stmmac/stmmac_selftests.c         |   8 +-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |   6 +-
 7 files changed, 457 insertions(+), 314 deletions(-)

-- 
2.36.1