Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   =?utf-8?Q?Christian_Kohlsch=C3=BCtter?= 
        <christian@kohlschutter.com>
Content-Type: text/plain;
        charset=utf-8
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (Mac OS X Mail 16.0 \(3696.100.31\))
Subject: [PATCH v6] arm64: dts: rockchip: Fix SD card init on rk3399-nanopi4
Date:   Mon, 18 Jul 2022 14:04:31 +0200
References: <C639AD88-77A1-4485-BAEA-2FF8FC15A844@kohlschutter.com>
 <12878108.O9o76ZdvQC@diego> <103b714c-b07c-f016-1062-84bd94786b22@arm.com>
 <9AF1E75F-5947-49B0-887D-82C426527B99@kohlschutter.com>
 <590f7a08-a6ca-be54-4254-363343642a52@arm.com>
 <A6B896E5-CD25-4441-B6A5-0BE1FA284B2C@kohlschutter.com>
 <A9634366-A012-43D2-B253-8BB9BF6005C7@kohlschutter.com>
 <CAGb2v65Ehbu1wrib2CzF1fDZuD3fHZQDhKfVusyUF9KnxTvi+Q@mail.gmail.com>
 <5ca9bd94-54d9-04f8-0098-a56ffb6f5fe1@arm.com>
 <502b3fbe-3077-407e-6010-a8cb3ffce7d6@arm.com>
 <449292CA-CE60-4B90-90F7-295FBFEAB3F8@kohlschutter.com>
 <73F9AED0-D2A8-4294-B6E1-1B92D2A36529@kohlschutter.com>
 <115AD6A4-021B-4879-BFB5-BC7689A0203E@kohlschutter.com>
 <17a4c6f6-d79c-a7b2-860f-e5944b778f9f@arm.com>
 <9405b97a-6758-ad4e-ccff-eed072096539@arm.com>
 <BF7CC548-88C9-4889-8A41-8E99C31EF81C@kohlschutter.com>
 <daf3b61c-d886-98eb-0443-de233d742041@arm.com>
 <CDF716FC-F6CF-44A9-84D9-B48C46E6AC2C@kohlschutter.com>
 <3912A668-9F73-40FD-8993-5060F632238A@kohlschutter.com>
 <7E830C9F-BB5D-4EFC-B3F4-1C580E9326A3@kohlschutter.com>
To:     Robin Murphy <robin.murphy@arm.com>, wens@kernel.org,
        =?utf-8?Q?Heiko_St=C3=BCbner?= <heiko@sntech.de>,
        Markus Reichl <m.reichl@fivetechno.de>,
        linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@lists.infradead.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        Linux MMC List <linux-mmc@vger.kernel.org>
In-Reply-To: <7E830C9F-BB5D-4EFC-B3F4-1C580E9326A3@kohlschutter.com>
Message-Id: <E5A1A1E7-449F-4161-87B9-7A6CA0CAA42C@kohlschutter.com>
Precedence: bulk

mmc/SD-card initialization may fail on NanoPi R4S with
"mmc1: problem reading SD Status register" /
"mmc1: error -110 whilst initialising SD card"
either on cold boot or after a reboot.

Moreover, the system would also sometimes hang upon reboot.

This is caused by vcc3v0-sd's "regulator-always-on", which triggers
an erroneous double-initialization of the regulator. This causes
voltage fluctuations that can, depending on timing, prevent the
SD card from initializing correctly.

Adding some liberal delay via "off-on-delay-us" is ineffective since
that codepath is skipped as long "regulator-always-on" is set.

Removing "regulator-always-on" alone is not sufficient because that
would allow the system to set GPIO0_A1 to LOW upon reboot, which may
cause the system to hang.

In order to allow the system to set GPIO0_A1 to HIGH upon initialization
but prevent it from changing it back to LOW, this patch increases the
usage count of vcc3v0-sd from 1 to 2, whereas the additional reference,
"vcc1v8_s3", is marked as "always-on", causing permanent retention.

Signed-off-by: Christian Kohlsch=C3=BCtter <christian@kohlschutter.com>
---
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi =
b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 8c0ff6c96e03..38507a6e3046 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -61,7 +61,17 @@ vcc1v8_s3: vcc1v8-s3 {
		regulator-min-microvolt =3D <1800000>;
		regulator-max-microvolt =3D <1800000>;
		regulator-name =3D "vcc1v8_s3";
-		vin-supply =3D <&vcc_1v8>;
+
+		/*
+		 * Workaround to skip setting gpio0 RK_PA1 to LOW upon =
reboot,
+		 * which may freeze the system.
+		 *
+		 * Adding a reference to vcc3v0_sd increases its =
num_users
+		 * count to 2, preventing deactivation since this =
regulator is
+		 * marked "always-on".
+		 */
+		// vin-supply =3D <&vcc_1v8>; // actual supply
+		vin-supply =3D <&vcc3v0_sd>;
	};

	vcc3v0_sd: vcc3v0-sd {
@@ -70,7 +80,6 @@ vcc3v0_sd: vcc3v0-sd {
		gpio =3D <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
		pinctrl-names =3D "default";
		pinctrl-0 =3D <&sdmmc0_pwr_h>;
-		regulator-always-on;
		regulator-min-microvolt =3D <3000000>;
		regulator-max-microvolt =3D <3000000>;
		regulator-name =3D "vcc3v0_sd";
--=20
2.36.1=