Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Horatiu Vultur <horatiu.vultur@microchip.com>
To:     <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
CC:     <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <claudiu.beznea@microchip.com>, <nicolas.ferre@microchip.com>,
        <UNGLinuxDriver@microchip.com>, <maxime.chevallier@bootlin.com>,
        "Horatiu Vultur" <horatiu.vultur@microchip.com>
Subject: [PATCH 2/3] ARM: dts: lan966x: Disable can0 on pcb8291
Date:   Mon, 18 Jul 2022 23:29:20 +0200
Message-ID: <20220718212921.1506984-3-horatiu.vultur@microchip.com>
In-Reply-To: <20220718212921.1506984-1-horatiu.vultur@microchip.com>
References: <20220718212921.1506984-1-horatiu.vultur@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

On pcb8291, can0 and the network driver share some of the GPIOs so only
1 device can be active. Therefore disable can0 as we want to enable the
network driver.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 arch/arm/boot/dts/lan966x-pcb8291.dts | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index 02fbf7371a8d..2cb532aa33f0 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -30,18 +30,6 @@ fc3_b_pins: fc3-b-pins {
 		pins = "GPIO_52", "GPIO_53";
 		function = "fc3_b";
 	};
-
-	can0_b_pins:  can0-b-pins {
-		/* RX, TX */
-		pins = "GPIO_35", "GPIO_36";
-		function = "can0_b";
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_b_pins>;
-	pinctrl-names = "default";
-	status = "okay";
 };
 
 &flx3 {
-- 
2.33.0