Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 20 Jul 2022 17:45:15 +0800
From:   ChiYuan Huang <u0084500@gmail.com>
To:     Andy Shevchenko <andy.shevchenko@gmail.com>
Cc:     ChiaEn Wu <peterwu.pub@gmail.com>,
        Lee Jones <lee.jones@linaro.org>,
        Daniel Thompson <daniel.thompson@linaro.org>,
        Jingoo Han <jingoohan1@gmail.com>, Pavel Machek <pavel@ucw.cz>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        Sebastian Reichel <sre@kernel.org>,
        Chunfeng Yun <chunfeng.yun@mediatek.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Guenter Roeck <linux@roeck-us.net>,
        "Krogerus, Heikki" <heikki.krogerus@linux.intel.com>,
        Helge Deller <deller@gmx.de>,
        ChiaEn Wu <chiaen_wu@richtek.com>,
        Alice Chen <alice_chen@richtek.com>,
        cy_huang <cy_huang@richtek.com>,
        dri-devel <dri-devel@lists.freedesktop.org>,
        Linux LED Subsystem <linux-leds@vger.kernel.org>,
        devicetree <devicetree@vger.kernel.org>,
        linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@lists.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Linux PM <linux-pm@vger.kernel.org>,
        USB <linux-usb@vger.kernel.org>,
        linux-iio <linux-iio@vger.kernel.org>,
        "open list:FRAMEBUFFER LAYER" <linux-fbdev@vger.kernel.org>,
        szuni chen <szunichen@gmail.com>,
        ChiYuan Huang <u0084500@gmail.com>
Subject: Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink
 type LED Indicator support
Message-ID: <20220720094510.GA29755@cyhuang-hp-elitebook-840-g3.rt>
References: <20220715112607.591-1-peterwu.pub@gmail.com>
 <20220715112607.591-12-peterwu.pub@gmail.com>
 <CAHp75VfyVufzf7CK38BVu_j0B4ax_d1gLAGYDE3H1zaKkuUB=A@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAHp75VfyVufzf7CK38BVu_j0B4ax_d1gLAGYDE3H1zaKkuUB=A@mail.gmail.com>
User-Agent: Mutt/1.5.24 (2015-08-30)
Precedence: bulk

On Fri, Jul 15, 2022 at 08:29:42PM +0200, Andy Shevchenko wrote:
> On Fri, Jul 15, 2022 at 1:29 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> >
> > From: ChiYuan Huang <cy_huang@richtek.com>
> >
> > The MediaTek MT6370 is a highly-integrated smart power management IC,
> > which includes a single cell Li-Ion/Li-Polymer switching battery
> > charger, a USB Type-C & Power Delivery (PD) controller, dual
> > Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> > a display bias driver and a general LDO for portable devices.
> >
> > In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> > support hardware pattern for constant current, PWM, and breath mode.
> > Isink4 channel can also be used as a CHG_VIN power good indicator.
> 
> ...
> 
> > +         This driver can also be built as a module. If so the module
> 
> so, the
> 
> > +         will be called "leds-mt6370.ko".
> 
> No ".ko".
> 
> Why did you ignore these comments? Please go and fix _everywhere_ in
> your series.
> It's basically the rule of thumb, if the reviewer gives a comment
> against an occurrence of something, go through entire series and check
> if there are other places like commented one and address them all.
> 
> ...
> 
> > + * Author: Alice Chen <alice_chen@richtek.com>
> 
> Strange, the commit message doesn't have a corresponding SoB, why?
> 
Yes, there're two authors Alice and me.
I'll correct it in next.
> ...
> 
> > +#define MT6370_PWM_DUTY                                31
> > +#define MT6372_PMW_DUTY                                255
> 
> Looks like these are limits by hardware?
> Check with the datasheet if (BIT(x) - 1) makes more sense here.
> 
> ...
> 
> > +       switch (led_no) {
> > +       case MT6370_LED_ISNK1:
> > +               sel_field = F_LED1_DUTY;
> > +               break;
> > +       case MT6370_LED_ISNK2:
> > +               sel_field = F_LED2_DUTY;
> > +               break;
> > +       case MT6370_LED_ISNK3:
> > +               sel_field = F_LED3_DUTY;
> > +               break;
> > +       default:
> > +               sel_field = F_LED4_DUTY;
> 
> Missed break;
> 
> > +       }
> 
> ...
> 
> > +       switch (led_no) {
> > +       case MT6370_LED_ISNK1:
> > +               sel_field = F_LED1_FREQ;
> > +               break;
> > +       case MT6370_LED_ISNK2:
> > +               sel_field = F_LED2_FREQ;
> > +               break;
> > +       case MT6370_LED_ISNK3:
> > +               sel_field = F_LED3_FREQ;
> > +               break;
> > +       default:
> > +               sel_field = F_LED4_FREQ;
> 
> Ditto.
> 
> > +       }
> 
> ...
> 
> > +       switch (led_no) {
> > +       case MT6370_LED_ISNK1:
> > +       case MT6370_LED_ISNK2:
> > +       case MT6370_LED_ISNK3:
> > +               *base = MT6370_REG_RGB1_TR + led_no * 3;
> > +               break;
> > +       default:
> > +               *base = MT6370_REG_RGB_CHRIND_TR;
> 
> Ditto.
> It seems you dropped them for all switch-cases. It's not goot, please
> restore them back.
> 
> > +       }
> 
> ...
> 
> > +       u8 val[P_MAX_PATTERNS / 2] = {0};
> 
> { } should suffice
> 
> 
In the above range selector, we use the 'logic or' to generate the
pattern values.

If to change it from '{0} to '{ }', is it correct?
> > +       /*
> > +        * Pattern list
> > +        * tr1: byte 0, b'[7: 4]
> > +        * tr2: byte 0, b'[3: 0]
> > +        * tf1: byte 1, b'[7: 4]
> > +        * tf2: byte 1, b'[3: 0]
> > +        * ton: byte 2, b'[7: 4]
> > +        * toff: byte 2, b'[3: 0]
> > +        */
> > +       for (i = 0; i < P_MAX_PATTERNS; i++) {
> > +               curr = pattern + i;
> > +
> > +               sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
> > +
> > +               linear_range_get_selector_within(priv->ranges + sel_range,
> > +                                                curr->delta_t, &sel);
> > +
> > +               val[i / 2] |= sel << (4 * ((i + 1) % 2));
> > +       }
> > +
> > +       memcpy(pattern_val, val, 3);
> > +       return 0;
> > +}
> 
> ...
> 
> > +out:
> 
> out_unlock:
> 
> > +       mutex_unlock(&priv->lock);
> > +
> > +       return ret;
> 
> ...
> 
> > +out:
> 
> Ditto. And so on.
> 
> > +       mutex_unlock(&priv->lock);
> > +
> > +       return ret;
> 
> ...
> 
> > +               sub_led = devm_kzalloc(priv->dev,
> > +                                      sizeof(*sub_led) * MC_CHANNEL_NUM,
> > +                                      GFP_KERNEL);
> 
> NIH devm_kcalloc(). Also check if you really need zeroed data.
>
Ok, and after the check, I also need to add one line to set the intensity to 0.
> > +               if (!sub_led)
> > +                       return -ENOMEM;
> 
> ...
> 
> > +                       ret = fwnode_property_read_u32(child, "color", &color);
> > +                       if (ret) {
> > +                               dev_err(priv->dev,
> > +                                       "led %d, no color specified\n",
> > +                                       led->index);
> > +                               return ret;
> 
> return dev_err_probe(...) ; ?
> 
> Ditto for many places in your entire series.
> 
> > +                       }
> 
> ...
> 
> > +       priv = devm_kzalloc(&pdev->dev,
> > +                           struct_size(priv, leds, count), GFP_KERNEL);
> 
> At least one parameter can be placed on the previous line.
> 
> > +       if (!priv)
> > +               return -ENOMEM;
> 
> -- 
> With Best Regards,
> Andy Shevchenko