Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiko Stuebner <heiko@sntech.de>
Cc:     Nicolas Frattaroli <frattaroli.nicolas@gmail.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm64: dts: rockchip: Add analog audio output on quartz64-b
Date:   Thu, 21 Jul 2022 10:33:00 +0200
Message-Id: <20220721083301.3711-1-frattaroli.nicolas@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This adds the necessary device tree changes to enable analog
audio output on the PINE64 Quartz64 Model B with its RK809
codec.

The headphone detection pin is left out for now because I couldn't
get it to work and am not sure if it even matters, but for future
reference: It's pin GPIO4 RK_PC4, named HP_DET_L_GPIO4_C4 in the
schematic.

Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
---
Changes since v1:
 - use generic node name for the simple-audio-card node

---
 .../boot/dts/rockchip/rk3566-quartz64-b.dts   | 32 ++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 02d5f5a8ca03..3897980d69d1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -42,6 +42,21 @@ led-user {
 		};
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		status = "okay";
 		compatible = "mmc-pwrseq-simple";
@@ -177,11 +192,16 @@ rk809: pmic@20 {
 		reg = <0x20>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
 		clock-output-names = "rk808-clkout1", "rk808-clkout2";
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>;
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
 		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
 		wakeup-source;
 		#clock-cells = <1>;
 
@@ -420,6 +440,16 @@ &i2c5 {
 	status = "disabled";
 };
 
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.37.1