Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Parikshit Pareek <quic_ppareek@quicinc.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC:     <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        Parikshit Pareek <quic_ppareek@quicinc.com>
Subject: [PATCH 1/2] arm64: dts: qcom: introduce sa8540p-ride dts
Date:   Thu, 21 Jul 2022 21:10:57 +0530
Message-ID: <20220721154057.15276-1-quic_ppareek@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Create new dts file specific for Qdrive board based on sa8540p chipset.
Introduce common dtsi file sa8295p-adp.dtsi, to be included for adp and
Qdrive board.

Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts      | 378 +----------------
 arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi     | 385 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts |  15 +
 4 files changed, 403 insertions(+), 376 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9e2a13d75f9d..fa0abcf7660b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8540p-adp-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 9398f0349944..adb6637117bc 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -2,388 +2,14 @@
 /*
  * Copyright (c) 2021, The Linux Foundation. All rights reserved.
  * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <dt-bindings/spmi/spmi.h>
-
-#include "sa8540p.dtsi"
+#include "sa8295p-adp.dtsi"
 
 / {
 	model = "Qualcomm SA8295P ADP";
 	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
-
-	aliases {
-		serial0 = &qup2_uart17;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&apps_rsc {
-	pmm8540-a-regulators {
-		compatible = "qcom,pm8150-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vreg_l3a: ldo3 {
-			regulator-name = "vreg_l3a";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1208000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l5a: ldo5 {
-			regulator-name = "vreg_l5a";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l7a: ldo7 {
-			regulator-name = "vreg_l7a";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l13a: ldo13 {
-			regulator-name = "vreg_l13a";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-	};
-
-	pmm8540-c-regulators {
-		compatible = "qcom,pm8150-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vreg_l1c: ldo1 {
-			regulator-name = "vreg_l1c";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l2c: ldo2 {
-			regulator-name = "vreg_l2c";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l3c: ldo3 {
-			regulator-name = "vreg_l3c";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l4c: ldo4 {
-			regulator-name = "vreg_l4c";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1208000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l6c: ldo6 {
-			regulator-name = "vreg_l6c";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l7c: ldo7 {
-			regulator-name = "vreg_l7c";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l10c: ldo10 {
-			regulator-name = "vreg_l10c";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l17c: ldo17 {
-			regulator-name = "vreg_l17c";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-	};
-
-	pmm8540-g-regulators {
-		compatible = "qcom,pm8150-rpmh-regulators";
-		qcom,pmic-id = "g";
-
-		vreg_l3g: ldo3 {
-			regulator-name = "vreg_l3g";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l7g: ldo7 {
-			regulator-name = "vreg_l7g";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		vreg_l8g: ldo8 {
-			regulator-name = "vreg_l8g";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-	};
-};
-
-&qup2 {
-	status = "okay";
-};
-
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "qcom/sa8540p/adsp.mbn";
-	status = "okay";
-};
-
-&remoteproc_nsp0 {
-	firmware-name = "qcom/sa8540p/cdsp.mbn";
-	status = "okay";
-};
-
-&remoteproc_nsp1 {
-	firmware-name = "qcom/sa8540p/cdsp1.mbn";
-	status = "okay";
-};
-
-&spmi_bus {
-	pm8450a: pmic@0 {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450a_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8450c: pmic@4 {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0x4 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450c_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8450e: pmic@8 {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0x8 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450e_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8450g: pmic@c {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0xc SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450g_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-};
-
-&ufs_mem_hc {
-	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&vreg_l17c>;
-	vcc-max-microamp = <800000>;
-	vccq-supply = <&vreg_l6c>;
-	vccq-max-microamp = <900000>;
-
-	status = "okay";
-};
-
-&ufs_mem_phy {
-	vdda-phy-supply = <&vreg_l8g>;
-	vdda-pll-supply = <&vreg_l3g>;
-
-	status = "okay";
 };
-
-&ufs_card_hc {
-	reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&vreg_l10c>;
-	vcc-max-microamp = <800000>;
-	vccq-supply = <&vreg_l3c>;
-	vccq-max-microamp = <900000>;
-
-	status = "okay";
-};
-
-&ufs_card_phy {
-	vdda-phy-supply = <&vreg_l8g>;
-	vdda-pll-supply = <&vreg_l3g>;
-
-	status = "okay";
-};
-
-&usb_0 {
-	status = "okay";
-};
-
-&usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
-	dr_mode = "peripheral";
-};
-
-&usb_0_hsphy {
-	vdda-pll-supply = <&vreg_l5a>;
-	vdda18-supply = <&vreg_l7a>;
-	vdda33-supply = <&vreg_l13a>;
-
-	status = "okay";
-};
-
-&usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l3a>;
-	vdda-pll-supply = <&vreg_l5a>;
-
-	status = "okay";
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
-	dr_mode = "host";
-};
-
-&usb_1_hsphy {
-	vdda-pll-supply = <&vreg_l1c>;
-	vdda18-supply = <&vreg_l7c>;
-	vdda33-supply = <&vreg_l2c>;
-
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l4c>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&usb_2_hsphy0 {
-	vdda-pll-supply = <&vreg_l5a>;
-	vdda18-supply = <&vreg_l7g>;
-	vdda33-supply = <&vreg_l13a>;
-
-	status = "okay";
-};
-
-&usb_2_hsphy1 {
-	vdda-pll-supply = <&vreg_l5a>;
-	vdda18-supply = <&vreg_l7g>;
-	vdda33-supply = <&vreg_l13a>;
-
-	status = "okay";
-};
-
-&usb_2_hsphy2 {
-	vdda-pll-supply = <&vreg_l5a>;
-	vdda18-supply = <&vreg_l7g>;
-	vdda33-supply = <&vreg_l13a>;
-
-	status = "okay";
-};
-
-&usb_2_hsphy3 {
-	vdda-pll-supply = <&vreg_l5a>;
-	vdda18-supply = <&vreg_l7g>;
-	vdda33-supply = <&vreg_l13a>;
-
-	status = "okay";
-};
-
-&usb_2_qmpphy0 {
-	vdda-phy-supply = <&vreg_l3a>;
-	vdda-pll-supply = <&vreg_l5a>;
-
-	status = "okay";
-};
-
-&usb_2_qmpphy1 {
-	vdda-phy-supply = <&vreg_l3a>;
-	vdda-pll-supply = <&vreg_l5a>;
-
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
-
-/* PINCTRL */
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi b/arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi
new file mode 100644
index 000000000000..75ef77b7cac1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "sa8540p.dtsi"
+
+/ {
+	aliases {
+		serial0 = &qup2_uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	pmm8540-a-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	pmm8540-c-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	pmm8540-g-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&qup2_uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8540p/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&spmi_bus {
+	pm8450a: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450a_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450c: pmic@4 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450c_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450e: pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450e_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8450g: pmic@c {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450g_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&ufs_card_hc {
+	reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l3c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_card_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l2c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4c>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
new file mode 100644
index 000000000000..87077f7a321c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sa8295p-adp.dtsi"
+
+/ {
+	model = "Qualcomm SA8540 ADP";
+	compatible = "qcom,sa8540p-adp-ride", "qcom,sa8540p";
+};
-- 
2.17.1