Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Yan Xinyu <sdlyyxy@bupt.edu.cn>
To:     johan@kernel.org, gregkh@linuxfoundation.org
Cc:     linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        Yan Xinyu <sdlyyxy@bupt.edu.cn>
Subject: [PATCH v2] USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
Date:   Thu, 21 Jul 2022 23:52:57 +0800
Message-Id: <20220721155257.631793-1-sdlyyxy@bupt.edu.cn>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Feedback-ID: bizesmtp:bupt.edu.cn:qybgforeign:qybgforeign9
Precedence: bulk

The usb_wwan_send_setup function generates DTR/RTS signals in compliance
with CDC ACM standard. This patch changes magic numbers in this function
to equivalent macros.

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
---
v1->v2:
 * Fix Signed-off-by name.
---
 drivers/usb/serial/usb_wwan.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index dab38b63eaf7..a6bd6144702d 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -29,10 +29,14 @@
 #include <linux/bitops.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/cdc.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include "usb-wwan.h"
 
+#define ACM_CTRL_DTR 0x01
+#define ACM_CTRL_RTS 0x02
+
 /*
  * Generate DTR/RTS signals on the port using the SET_CONTROL_LINE_STATE request
  * in CDC ACM.
@@ -48,9 +52,9 @@ static int usb_wwan_send_setup(struct usb_serial_port *port)
 	portdata = usb_get_serial_port_data(port);
 
 	if (portdata->dtr_state)
-		val |= 0x01;
+		val |= ACM_CTRL_DTR;
 	if (portdata->rts_state)
-		val |= 0x02;
+		val |= ACM_CTRL_RTS;
 
 	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 
@@ -59,8 +63,9 @@ static int usb_wwan_send_setup(struct usb_serial_port *port)
 		return res;
 
 	res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				0x22, 0x21, val, ifnum, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+				USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+				USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+				val, ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 
 	usb_autopm_put_interface(port->serial->interface);
 
-- 
2.25.1