Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 21 Jul 2022 13:56:08 -0500
From:   Bjorn Helgaas <helgaas@kernel.org>
To:     William Zhang <william.zhang@broadcom.com>
Cc:     Linux ARM List <linux-arm-kernel@lists.infradead.org>,
        joel.peshkin@broadcom.com, dan.beygelman@broadcom.com,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        "David S. Miller" <davem@davemloft.net>,
        Rob Herring <robh@kernel.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Wim Van Sebroeck <wim@linux-watchdog.org>,
        =?utf-8?B?UmFmYcWCIE1pxYJlY2tp?= <rafal@milecki.pl>,
        "open list:I2C SUBSYSTEM HOST DRIVERS" <linux-i2c@vger.kernel.org>,
        open list <linux-kernel@vger.kernel.org>,
        "open list:MEMORY TECHNOLOGY DEVICES (MTD)" 
        <linux-mtd@lists.infradead.org>,
        "open list:NETWORKING DRIVERS" <netdev@vger.kernel.org>,
        "open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS" 
        <linux-pci@vger.kernel.org>,
        "open list:GENERIC PHY FRAMEWORK" <linux-phy@lists.infradead.org>,
        "open list:PIN CONTROL SUBSYSTEM" <linux-gpio@vger.kernel.org>,
        "open list:BROADCOM BMIPS MIPS ARCHITECTURE" 
        <linux-mips@vger.kernel.org>,
        "open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>,
        "open list:WATCHDOG DEVICE DRIVERS" <linux-watchdog@vger.kernel.org>
Subject: Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on
 ARCH_BCMBCA
Message-ID: <20220721185608.GA1743293@bhelgaas>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220721000740.29624-1-william.zhang@broadcom.com>
Precedence: bulk

On Wed, Jul 20, 2022 at 05:07:40PM -0700, William Zhang wrote:
> Replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>  # drivers/pci

+1 on "why" vs "what" in the commit log.

> ---
> 
>  drivers/i2c/busses/Kconfig            | 4 ++--
>  drivers/mtd/parsers/Kconfig           | 6 +++---
>  drivers/net/ethernet/broadcom/Kconfig | 4 ++--
>  drivers/pci/controller/Kconfig        | 2 +-
>  drivers/phy/broadcom/Kconfig          | 4 ++--
>  drivers/pinctrl/bcm/Kconfig           | 4 ++--
>  drivers/reset/Kconfig                 | 2 +-
>  drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
>  drivers/tty/serial/Kconfig            | 4 ++--
>  drivers/watchdog/Kconfig              | 2 +-
>  10 files changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 45a4e9f1b639..fd9a4dd01997 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -487,8 +487,8 @@ config I2C_BCM_KONA
>  
>  config I2C_BRCMSTB
>  	tristate "BRCM Settop/DSL I2C controller"
> -	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
> -		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
> +	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
> +		   BMIPS_GENERIC || COMPILE_TEST
>  	default y
>  	help
>  	  If you say yes to this option, support will be included for the
> diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
> index b43df73927a0..d6db655a1d24 100644
> --- a/drivers/mtd/parsers/Kconfig
> +++ b/drivers/mtd/parsers/Kconfig
> @@ -69,8 +69,8 @@ config MTD_OF_PARTS
>  
>  config MTD_OF_PARTS_BCM4908
>  	bool "BCM4908 partitioning support"
> -	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
> -	default ARCH_BCM4908
> +	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
> +	default ARCH_BCMBCA
>  	help
>  	  This provides partitions parser for BCM4908 family devices
>  	  that can have multiple "firmware" partitions. It takes care of
> @@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
>  
>  config MTD_OF_PARTS_LINKSYS_NS
>  	bool "Linksys Northstar partitioning support"
> -	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
> +	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
>  	default ARCH_BCM_5301X
>  	help
>  	  This provides partitions parser for Linksys devices based on Broadcom
> diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
> index 56e0fb07aec7..f4e1ca68d831 100644
> --- a/drivers/net/ethernet/broadcom/Kconfig
> +++ b/drivers/net/ethernet/broadcom/Kconfig
> @@ -53,8 +53,8 @@ config B44_PCI
>  
>  config BCM4908_ENET
>  	tristate "Broadcom BCM4908 internal mac support"
> -	depends on ARCH_BCM4908 || COMPILE_TEST
> -	default y if ARCH_BCM4908
> +	depends on ARCH_BCMBCA || COMPILE_TEST
> +	default y if ARCH_BCMBCA
>  	help
>  	  This driver supports Ethernet controller integrated into Broadcom
>  	  BCM4908 family SoCs.
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index d1c5fcf00a8a..bfd9bac37e24 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -274,7 +274,7 @@ config VMD
>  
>  config PCIE_BRCMSTB
>  	tristate "Broadcom Brcmstb PCIe host controller"
> -	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
> +	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
>  		   BMIPS_GENERIC || COMPILE_TEST
>  	depends on OF
>  	depends on PCI_MSI_IRQ_DOMAIN
> diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
> index 93a6a8ee4716..1d89a2fd9b79 100644
> --- a/drivers/phy/broadcom/Kconfig
> +++ b/drivers/phy/broadcom/Kconfig
> @@ -93,11 +93,11 @@ config PHY_BRCM_SATA
>  
>  config PHY_BRCM_USB
>  	tristate "Broadcom STB USB PHY driver"
> -	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
> +	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
>  	depends on OF
>  	select GENERIC_PHY
>  	select SOC_BRCMSTB if ARCH_BRCMSTB
> -	default ARCH_BCM4908 || ARCH_BRCMSTB
> +	default ARCH_BCMBCA || ARCH_BRCMSTB
>  	help
>  	  Enable this to support the Broadcom STB USB PHY.
>  	  This driver is required by the USB XHCI, EHCI and OHCI
> diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
> index 8f4d89806fcb..35b51ce4298e 100644
> --- a/drivers/pinctrl/bcm/Kconfig
> +++ b/drivers/pinctrl/bcm/Kconfig
> @@ -31,13 +31,13 @@ config PINCTRL_BCM2835
>  
>  config PINCTRL_BCM4908
>  	tristate "Broadcom BCM4908 pinmux driver"
> -	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
> +	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
>  	select PINMUX
>  	select PINCONF
>  	select GENERIC_PINCONF
>  	select GENERIC_PINCTRL_GROUPS
>  	select GENERIC_PINMUX_FUNCTIONS
> -	default ARCH_BCM4908
> +	default ARCH_BCMBCA
>  	help
>  	  Driver for BCM4908 family SoCs with integrated pin controller.
>  
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index f9a7cee01659..7ae71535fe2a 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -201,7 +201,7 @@ config RESET_SCMI
>  
>  config RESET_SIMPLE
>  	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
> -	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
> +	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
>  	help
>  	  This enables a simple reset controller driver for reset lines that
>  	  that can be asserted and deasserted by toggling bits in a contiguous,
> diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
> index 9e501c8ac5ce..355c34482076 100644
> --- a/drivers/soc/bcm/bcm63xx/Kconfig
> +++ b/drivers/soc/bcm/bcm63xx/Kconfig
> @@ -13,8 +13,8 @@ endif # SOC_BCM63XX
>  
>  config BCM_PMB
>  	bool "Broadcom PMB (Power Management Bus) driver"
> -	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
> -	default ARCH_BCM4908
> +	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
> +	default ARCH_BCMBCA
>  	select PM_GENERIC_DOMAINS if PM
>  	help
>  	  This enables support for the Broadcom's PMB (Power Management Bus) that
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index e3279544b03c..f32bb01c3feb 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
>  config SERIAL_BCM63XX
>  	tristate "Broadcom BCM63xx/BCM33xx UART support"
>  	select SERIAL_CORE
> -	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
> -	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
> +	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
> +	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
>  	help
>  	  This enables the driver for the onchip UART core found on
>  	  the following chipsets:
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 32fd37698932..1f85ec8a4b3b 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1798,7 +1798,7 @@ config BCM7038_WDT
>  	tristate "BCM63xx/BCM7038 Watchdog"
>  	select WATCHDOG_CORE
>  	depends on HAS_IOMEM
> -	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
> +	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
>  	help
>  	  Watchdog driver for the built-in hardware in Broadcom 7038 and
>  	  later SoCs used in set-top boxes.  BCM7038 was made public
> -- 
> 2.34.1
> 


> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel