Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 25 Jul 2022 12:38:04 +0200
From:   Niklas =?iso-8859-1?Q?S=F6derlund?= 
        <niklas.soderlund@ragnatech.se>
To:     Daniel Lezcano <daniel.lezcano@linaro.org>
Cc:     Daniel Lezcano <daniel.lezcano@linexp.org>, rafael@kernel.org,
        rui.zhang@intel.com, khilman@baylibre.com, abailon@baylibre.com,
        amitk@kernel.org, linux-kernel@vger.kernel.org,
        linux-pm@vger.kernel.org,
        "open list:RENESAS R-CAR THERMAL DRIVERS" 
        <linux-renesas-soc@vger.kernel.org>
Subject: Re: [PATCH v1 17/33] thermal/drivers/rcar: Switch to new of API
Message-ID: <Yt5yjAAT3y4YSgl1@oden.dyn.berto.se>
References: <20220710212423.681301-1-daniel.lezcano@linexp.org>
 <20220710212423.681301-18-daniel.lezcano@linexp.org>
 <YtZ1IExNlsYaJkC9@oden.dyn.berto.se>
 <18ade2d0-ebda-0526-71f3-65a0b2685068@linexp.org>
 <Yt2W5UCXaB3Memzg@oden.dyn.berto.se>
 <e2a56ac3-057c-2b17-7bde-7e860a86807d@linexp.org>
 <Yt3KDSO248WebZ/w@oden.dyn.berto.se>
 <Yt3Vmt/AAzqzDzBF@oden.dyn.berto.se>
 <28e915c2-4871-b648-f5ac-78d6ecb32768@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <28e915c2-4871-b648-f5ac-78d6ecb32768@linaro.org>
Precedence: bulk

Hi Daniel,

On 2022-07-25 12:00:30 +0200, Daniel Lezcano wrote:
> 
> Hi Niklas,
> 
> On 25/07/2022 01:28, Niklas S?derlund wrote:
> > Hi (again) Daniel,
> > 
> > I figured it out, the thermal zone is disabled after this change. For
> > both rcar sensors with the new API thermal_zone_device_enable() is never
> > called.
> > 
> > In the old API the zone is enabled in the call chain of
> > devm_thermal_zone_of_sensor_register(). While after this change the zone
> > is not enabled by the core when calling thermal_zone_device_enable().
> > 
> > If I add a call to thermal_zone_device_enable() together with the new
> > API everything works as before. But I'm not sure if the correct solution
> > is to add a call to thermal_zone_device_enable() in the sensor drivers
> > or in the call chain of the new API?
> > 
> > On 2022-07-25 00:39:10 +0200, Niklas S?derlund wrote:
> > > Hi Daniel,
> > > 
> > > I tested your branch, unfortunately with the same result for
> > > rcar_gen3_thermal. Manipulation of emul_temp file do not trigger
> > > actions.
> 
> Thanks for investigating, I updated the branch. Does it fix the issue ?

I tested the branch with the head [1] and it restores the expected 
operation for both rcar_gen3_thermal and rcar_thermal sensors.

Thanks for the fix, with this change I'm happy with this new API.

1. commit e9b792a531c10756 ("thermal/of: Remove old OF code")

-- 
Kind Regards,
Niklas S?derlund