Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 26 Jul 2022 13:20:50 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     Krishna chaitanya chundru <quic_krichai@quicinc.com>,
        Stanimir Varbanov <svarbanov@mm-sol.com>
Cc:     helgaas@kernel.org, linux-pci@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        mka@chromium.org, quic_vbadigan@quicinc.com,
        quic_hemantk@quicinc.com, quic_nitegupt@quicinc.com,
        quic_skananth@quicinc.com, quic_ramkri@quicinc.com,
        swboyd@chromium.org, dmitry.baryshkov@linaro.org,
        Stanimir Varbanov <svarbanov@mm-sol.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Lorenzo Pieralisi <lpieralisi@kernel.org>,
        Rob Herring <robh@kernel.org>,
        Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>,
        Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH v3] PCI: qcom: Allow L1 and its sub states
Message-ID: <20220726075050.GC5522@workstation>
References: <1657886366-32685-1-git-send-email-quic_krichai@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1657886366-32685-1-git-send-email-quic_krichai@quicinc.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Precedence: bulk

On Fri, Jul 15, 2022 at 05:29:25PM +0530, Krishna chaitanya chundru wrote:
> Allow L1 and its sub-states in the qcom pcie driver.
> By default this is disabled in the qcom specific hardware.
> So enabling it explicitly only for controllers belonging to
> 2_7_0.
> 
> This patch will not affect any link capability registers, this
> will allow the link transitions to L1 and its sub states only
> if they are already supported.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Stan, could you please review this patch?

Thanks,
Mani

> ----
> 
> Changes since v1 & v2:
> 	- Update in the commit text only.
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index a7202f0..5ef444f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -41,6 +41,9 @@
>  #define L23_CLK_RMV_DIS				BIT(2)
>  #define L1_CLK_RMV_DIS				BIT(1)
>  
> +#define PCIE20_PARF_PM_CTRL			0x20
> +#define REQ_NOT_ENTR_L1				BIT(5)
> +
>  #define PCIE20_PARF_PHY_CTRL			0x40
>  #define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)
>  #define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
> @@ -1261,6 +1264,11 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	val |= BIT(4);
>  	writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
>  
> +	/* Enable L1 and L1ss */
> +	val = readl(pcie->parf + PCIE20_PARF_PM_CTRL);
> +	val &= ~REQ_NOT_ENTR_L1;
> +	writel(val, pcie->parf + PCIE20_PARF_PM_CTRL);
> +
>  	if (IS_ENABLED(CONFIG_PCI_MSI)) {
>  		val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
>  		val |= BIT(31);
> -- 
> 2.7.4
>