Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220725151258.42574-1-jim2101024@gmail.com> <20220726220303.GA109624@bhelgaas>
In-Reply-To: <20220726220303.GA109624@bhelgaas>
From:   Jim Quinlan <jim2101024@gmail.com>
Date:   Tue, 26 Jul 2022 21:01:26 -0400
Message-ID: <CANCKTBt=Mt6i+PgBwXfBUUOfo+vpCKv2NK8xJtZFoe5sheyZ7A@mail.gmail.com>
Subject: Re: [PATCH v3 0/7] PCI: brcmstb: Re-submit reverted patchset
To:     Bjorn Helgaas <helgaas@kernel.org>
Cc:     linux-pci <linux-pci@vger.kernel.org>,
        Nicolas Saenz Julienne <nsaenz@kernel.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Cyril Brulebois <kibi@debian.org>,
        bcm-kernel-feedback-list <bcm-kernel-feedback-list@broadcom.com>,
        Jim Quinlan <james.quinlan@broadcom.com>,
        =?UTF-8?Q?Krzysztof_Wilczy=C5=84ski?= <kw@linux.com>,
        "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" 
        <linux-arm-kernel@lists.infradead.org>,
        open list <linux-kernel@vger.kernel.org>,
        "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" 
        <linux-rpi-kernel@lists.infradead.org>,
        Rob Herring <robh@kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Tue, Jul 26, 2022 at 6:03 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Mon, Jul 25, 2022 at 11:12:49AM -0400, Jim Quinlan wrote:
> > ...
> > Jim Quinlan (7):
> >   PCI: brcmstb: Remove unnecessary forward declarations
> >   PCI: brcmstb: Split brcm_pcie_setup() into two funcs
> >   PCI: brcmstb: Gate config space access on link status
> >   PCI: brcmstb: Add mechanism to turn on subdev regulators
> >   PCI: brcmstb: Add control of subdevice voltage regulators
> >   PCI: brcmstb: Do not turn off WOL regulators on suspend
> >   PCI: brcmstb: Have .map_bus function names end with 'map_bus'
> >
> >  drivers/pci/controller/pcie-brcmstb.c | 476 ++++++++++++++++++--------
> >  1 file changed, 341 insertions(+), 135 deletions(-)
>
> I reworked these and put them on pci/ctrl/brcm for v5.20.  This is a
> proposal, not something set in stone.  But time is of the essence to
> figure out how we want to proceed.
>
> I changed a lot of stuff and it's likely I broke something in the
> process, so please take a look and test this out.  Here's an outline
> of what I changed:
>
>   - Moved the config access "link up" check earlier because it's not
>     related to the power regulator patches.
>
>   - Changed config access "link up" checks to use PCIE_ECAM_REG()
>     instead of hard-coding 0xfff masks.  The 32-bit accessors already
>     mask out the low two bits, so we don't need to do that here.
>
>   - Squashed pci_subdev_regulators_add_bus() directly into
>     brcm_pcie_add_bus() for readability.  Similarly for
>     pci_subdev_regulators_remove_bus().
>
>   - This makes a clear split between:
>
>     * A patch that adds get/enable of regulators, and starting the
>       link after enabling regulators, and
>
>     * A patch that disables/enables regulators for suspend/resume.
>
>   - Since we only support one set of subregulator info (for one Root
>     Port, and brcm_pcie_suspend_noirq() depends on this since it uses
>     the pcie->sr pointer), use pcie->sr always instead of
>     dev->driver_data.
>
>   - Squashed wakeup device checking into the suspend/resume patch so
>     there's not a time when suspend might turn off power to a wakeup
>     device.
>
>   - Renamed brcm_pcie_map_bus32() to brcm7425_pcie_map_bus() so it
>     ends in "_map_bus()" like other drivers.  Also,
>     brcm7425_pcie_map_bus() doesn't actually depend on the 32-bitness.

Hi Bjorn,
Sorry, it seems that some of my future commits have somehow bled code
into the driver (e.g. "has_phy").
LGTM.

Thanks and regards,
Jim Quinlan
Broadcom STB

>
> Bjorn