Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 27 Jul 2022 19:11:23 +0300
From:   Abel Vesa <abel.vesa@linaro.org>
To:     Jesse Taube <mr.bossman075@gmail.com>
Cc:     linux-imx@nxp.com, robh+dt@kernel.org, mturquette@baylibre.com,
        sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com, aisheng.dong@nxp.com,
        stefan@agner.ch, linus.walleij@linaro.org,
        daniel.lezcano@linaro.org, tglx@linutronix.de, arnd@arndb.de,
        olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk,
        abel.vesa@nxp.com, dev@lynxeye.de, marcel.ziswiler@toradex.com,
        tharvey@gateworks.com, leoyang.li@nxp.com,
        sebastian.reichel@collabora.com, cniedermaier@dh-electronics.com,
        clin@suse.com, giulio.benetti@benettiengineering.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-gpio@vger.kernel.org
Subject: Re: [PATCH v5 07/12] clk: imx: Update pllv3 to support i.MXRT1170
Message-ID: <20220727161123.nxmtv4t5oeetow32@linaro.org>
References: <202207270909.VypZ4wfI-lkp@intel.com>
 <20220727031541.227335-1-Mr.Bossman075@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220727031541.227335-1-Mr.Bossman075@gmail.com>
Precedence: bulk

On 22-07-26 23:15:41, Jesse Taube wrote:
> The i.MXRT1170 has a pll that has the multiplier bits inverted and
> cannot be changed add IMX_PLLV3_GENERICV2.
>
> The i.MXRT1170 also has the lock bit moved as well as the
> power bit inverted the power bit also is in different locations on each
> pll control register.
>
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>

Please do not send the new version as a reply to the old patch.

> ---
> V1 -> V2:
>  - Nothing done
> V2 -> V3:
>  - Nothing done
> V3 -> V4:
>  - Nothing done
> V4 -> V5:
>  - Add __imx_clk_hw_pllv3 to change power bit
>  - Add BM_PLL_POWER and imx_clk_hw_pllv3 to header
>  - Remove imx_clk_hw_pll3_powerbit
> ---
>  drivers/clk/imx/clk-pllv3.c | 57 +++++++++++++++++++++++++++++++++----
>  drivers/clk/imx/clk.h       | 11 +++++--
>  2 files changed, 60 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index eea32f87c60a..68b1498cafe1 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -21,8 +21,8 @@
>  #define PLL_VF610_NUM_OFFSET	0x20
>  #define PLL_VF610_DENOM_OFFSET	0x30
>
> -#define BM_PLL_POWER		(0x1 << 12)
>  #define BM_PLL_LOCK		(0x1 << 31)
> +#define BM_PLL_LOCK_V2		(0x1 << 29)
>  #define IMX7_ENET_PLL_POWER	(0x1 << 5)
>  #define IMX7_DDR_PLL_POWER	(0x1 << 20)
>
> @@ -34,6 +34,7 @@
>   * @base:	 base address of PLL registers
>   * @power_bit:	 pll power bit mask
>   * @powerup_set: set power_bit to power up the PLL
> + * @lock_bit:	 pll lock bit mask
>   * @div_mask:	 mask of divider bits
>   * @div_shift:	 shift of divider bits
>   * @ref_clock:	reference clock rate
> @@ -48,6 +49,7 @@ struct clk_pllv3 {
>  	void __iomem	*base;
>  	u32		power_bit;
>  	bool		powerup_set;
> +	u32		lock_bit;
>  	u32		div_mask;
>  	u32		div_shift;
>  	unsigned long	ref_clock;
> @@ -65,7 +67,7 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
>  	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
>  		return 0;
>
> -	return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK,
> +	return readl_relaxed_poll_timeout(pll->base, val, val & pll->lock_bit,
>  					  500, PLL_LOCK_TIMEOUT);
>  }
>
> @@ -101,7 +103,7 @@ static int clk_pllv3_is_prepared(struct clk_hw *hw)
>  {
>  	struct clk_pllv3 *pll = to_clk_pllv3(hw);
>
> -	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
> +	if (readl_relaxed(pll->base) & pll->lock_bit)
>  		return 1;
>
>  	return 0;
> @@ -155,6 +157,39 @@ static const struct clk_ops clk_pllv3_ops = {
>  	.set_rate	= clk_pllv3_set_rate,
>  };
>
> +static int clk_pllv3_genericv2_set_rate(struct clk_hw *hw, unsigned long rate,
> +		unsigned long parent_rate)
> +{
> +	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> +	u32 val, div;
> +
> +	div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
> +	val = (div == 0) ? parent_rate * 22 : parent_rate * 20;
> +
> +	if (rate == val)
> +		return 0;
> +
> +	return -EINVAL;
> +}
> +
> +static unsigned long clk_pllv3_genericv2_recalc_rate(struct clk_hw *hw,
> +					   unsigned long parent_rate)
> +{
> +	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> +	u32 div = (readl_relaxed(pll->base) >> pll->div_shift)  & pll->div_mask;
> +
> +	return (div == 0) ? parent_rate * 22 : parent_rate * 20;
> +}
> +
> +static const struct clk_ops clk_pllv3_genericv2_ops = {
> +	.prepare	= clk_pllv3_prepare,
> +	.unprepare	= clk_pllv3_unprepare,
> +	.is_prepared	= clk_pllv3_is_prepared,
> +	.recalc_rate	= clk_pllv3_genericv2_recalc_rate,
> +	.round_rate	= clk_pllv3_round_rate,
> +	.set_rate	= clk_pllv3_genericv2_set_rate,
> +};
> +
>  static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
>  					       unsigned long parent_rate)
>  {
> @@ -407,9 +442,9 @@ static const struct clk_ops clk_pllv3_enet_ops = {
>  	.recalc_rate	= clk_pllv3_enet_recalc_rate,
>  };
>
> -struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
> +struct clk_hw *__imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
>  			  const char *parent_name, void __iomem *base,
> -			  u32 div_mask)
> +			  u32 div_mask, u8 pwr_bit)
>  {
>  	struct clk_pllv3 *pll;
>  	const struct clk_ops *ops;
> @@ -421,11 +456,21 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
>  	if (!pll)
>  		return ERR_PTR(-ENOMEM);
>
> -	pll->power_bit = BM_PLL_POWER;
> +	pll->power_bit = pwr_bit;
> +	pll->lock_bit = BM_PLL_LOCK;
>  	pll->num_offset = PLL_NUM_OFFSET;
>  	pll->denom_offset = PLL_DENOM_OFFSET;
>
>  	switch (type) {
> +	case IMX_PLLV3_GENERICV2:
> +		pll->lock_bit = BM_PLL_LOCK_V2;
> +		pll->powerup_set = true;
> +		ops = &clk_pllv3_genericv2_ops;
> +		break;
> +	case IMX_PLLV3_SYSV2:
> +		pll->lock_bit = BM_PLL_LOCK_V2;
> +		pll->powerup_set = true;
> +		fallthrough;
>  	case IMX_PLLV3_SYS:
>  		ops = &clk_pllv3_sys_ops;
>  		break;
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index 5061a06468df..2bf50c92fdfa 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -6,6 +6,8 @@
>  #include <linux/spinlock.h>
>  #include <linux/clk-provider.h>
>
> +#define BM_PLL_POWER		BIT(12)
> +
>  extern spinlock_t imx_ccm_lock;
>  extern bool mcore_booted;
>
> @@ -102,6 +104,9 @@ extern struct imx_fracn_gppll_clk imx_fracn_gppll;
>  	to_clk(clk_hw_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \
>  				cgr_val, cgr_mask, clk_gate_flags, lock, share_count))
>
> +#define imx_clk_hw_pllv3(type, name, parent_name, base, div_mask) \
> +	__imx_clk_hw_pllv3(type, name, parent_name, base, div_mask, 1)
> +
>  #define imx_clk_pllv3(type, name, parent_name, base, div_mask) \
>  	to_clk(imx_clk_hw_pllv3(type, name, parent_name, base, div_mask))
>
> @@ -242,6 +247,8 @@ struct clk_hw *imx_clk_hw_sscg_pll(const char *name,
>
>  enum imx_pllv3_type {
>  	IMX_PLLV3_GENERIC,
> +	IMX_PLLV3_GENERICV2,
> +	IMX_PLLV3_SYSV2,
>  	IMX_PLLV3_SYS,
>  	IMX_PLLV3_USB,
>  	IMX_PLLV3_USB_VF610,
> @@ -253,8 +260,8 @@ enum imx_pllv3_type {
>  	IMX_PLLV3_AV_IMX7,
>  };
>
> -struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
> -		const char *parent_name, void __iomem *base, u32 div_mask);
> +struct clk_hw *__imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
> +		const char *parent_name, void __iomem *base, u32 div_mask, u8 pwr_bit);
>
>  #define PLL_1416X_RATE(_rate, _m, _p, _s)		\
>  	{						\
> --
> 2.36.1
>