Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Dario Binacchi <dario.binacchi@amarulasolutions.com>
To:     linux-kernel@vger.kernel.org
Cc:     linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>,
        Jeroen Hofstee <jhofstee@victronenergy.com>,
        michael@amarulasolutions.com,
        Amarula patchwork <linux-amarula@amarulasolutions.com>,
        Oliver Hartkopp <socketcan@hartkopp.net>,
        Dario Binacchi <dario.binacchi@amarulasolutions.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Wolfgang Grandegger <wg@grandegger.com>, netdev@vger.kernel.org
Subject: [PATCH v4 0/7] can: slcan: extend supported features (step 2)
Date:   Thu, 28 Jul 2022 09:02:47 +0200
Message-Id: <20220728070254.267974-1-dario.binacchi@amarulasolutions.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

With this series I try to finish the task, started with the series [1],
of completely removing the dependency of the slcan driver from the
userspace slcand/slcan_attach applications.

The series also contains patches that remove the legacy stuff (slcan_devs,
SLCAN_MAGIC, ...) and do some module cleanup.

The series has been created on top of the patches:

can: slcan: convert comments to network style comments
can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level()
can: slcan: fix whitespace issues
can: slcan: convert comparison to NULL into !val
can: slcan: clean up if/else
can: slcan: use scnprintf() as a hardening measure
can: slcan: do not report txerr and rxerr during bus-off
can: slcan: do not sleep with a spin lock held

applied to linux-next.

[1] https://lore.kernel.org/all/20220628163137.413025-1-dario.binacchi@amarulasolutions.com/

Changes in v4:
- Add Max Staudt's `Reviewed-by' tag.
- Drop the patch "ethtool: add support to get/set CAN bit time register".
- Drop the patch "can: slcan: add support to set bit time register (btr)".
- Remove the RFC prefix from the series.

Changes in v3:
- Update the commit message.
- Use 1 space in front of the =.
- Put the series as RFC again.
- Pick up the patch "can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names".
- Add the patch "ethtool: add support to get/set CAN bit time register"
  to the series.
- Add the patch "can: slcan: add support to set bit time register (btr)"
  to the series.
- Replace the link https://marc.info/?l=linux-can&m=165806705927851&w=2 with
  https://lore.kernel.org/all/507b5973-d673-4755-3b64-b41cb9a13b6f@hartkopp.net.
- Add the `Suggested-by' tag.

Changes in v2:
- Re-add headers that export at least one symbol used by the module.
- Update the commit description.
- Drop the old "slcan" name to use the standard canX interface naming.
- Remove comment on listen-only command.
- Update the commit subject and description.
- Add the patch "MAINTAINERS: Add myself as maintainer of the SLCAN driver"
  to the series.

Dario Binacchi (6):
  can: slcan: remove useless header inclusions
  can: slcan: remove legacy infrastructure
  can: slcan: change every `slc' occurrence in `slcan'
  can: slcan: use the generic can_change_mtu()
  can: slcan: add support for listen-only mode
  MAINTAINERS: Add maintainer for the slcan driver

Vincent Mailhol (1):
  can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded
    names

 MAINTAINERS                        |   6 +
 drivers/net/can/slcan/slcan-core.c | 459 +++++++++--------------------
 2 files changed, 144 insertions(+), 321 deletions(-)

-- 
2.32.0