Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   nick.hawkins@hpe.com
To:     nick.hawkins@hpe.com
Cc:     broonie@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, verdun@hpe.com,
        linux@armlinux.org.uk, linux-spi@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, arnd@arndb.de
Subject: [PATCH v6 0/5] Add SPI Driver to HPE GXP Architecture
Date:   Thu, 28 Jul 2022 11:14:54 -0500
Message-Id: <20220728161459.7738-1-nick.hawkins@hpe.com>
Precedence: bulk

From: Nick Hawkins <nick.hawkins@hpe.com>

Changes since v6:
 *Removed spaces between tags on commit descriptions

Changes since v5:
 *Fixed indentation in Kconfig file

Changes since v4:
 *Removed unnecessary quotes in hpe,gxp-spifi.yaml

Changes since v3:
 *Fixed indentations in hpe,gxp-spifi.yaml

Changes since v2:
 *Changed the CONFIG_SPI_GXP from y to m in defconfig
 *Removed extra space around < > for reg in hpe,gxp-spifi.yaml
 *Changed interrupt-parrent to interrupt-parent in hpe,gxp-spifi.yaml
 *Removed repeated include file in spi-gxp.c
 *Removed unnecessary initialization of ret variable in spi-gxp.c
 *Removed conditional variable checks where failure is not possible in
  spi-gxp.c
 *Removed unnecessary variable cs in spi-gxp.c
 *Removed blank gxp-spifi-remove function in spi-gxp.c
 *Fixed error messages so they are not repetitive

The GXP supports 3 separate SPI interfaces to accommodate the system
flash, core flash, and other functions. The SPI engine supports variable
clock frequency, selectable 3-byte or 4-byte addressing and a
configurable x1, x2, and x4 command/address/data modes. The memory
buffer for reading and writing ranges between 256 bytes and 8KB. This
driver supports access to the core flash and bios part.

Nick Hawkins (5):
  spi: spi-gxp: Add support for HPE GXP SoCs
  spi: dt-bindings: add documentation for hpe,gxp-spifi
  ARM: dts: hpe: Add spi driver node
  ARM: configs: multi_v7_defconfig: Enable HPE GXP SPI driver
  MAINTAINERS: add spi support to GXP

 .../bindings/spi/hpe,gxp-spifi.yaml           |  56 +++
 MAINTAINERS                                   |   2 +
 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts      |  58 ++++
 arch/arm/boot/dts/hpe-gxp.dtsi                |  21 +-
 arch/arm/configs/multi_v7_defconfig           |   1 +
 drivers/spi/Kconfig                           |   7 +
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-gxp.c                         | 325 ++++++++++++++++++
 8 files changed, 470 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
 create mode 100644 drivers/spi/spi-gxp.c

-- 
2.17.1