Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763352AbXFFKjz (ORCPT ); Wed, 6 Jun 2007 06:39:55 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1760459AbXFFKjj (ORCPT ); Wed, 6 Jun 2007 06:39:39 -0400 Received: from s2.ukfsn.org ([217.158.120.143]:52298 "EHLO mail.ukfsn.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1762717AbXFFKje (ORCPT ); Wed, 6 Jun 2007 06:39:34 -0400 Message-ID: <46668EE0.2030509@dgreaves.com> Date: Wed, 06 Jun 2007 11:39:28 +0100 From: David Greaves User-Agent: Mozilla-Thunderbird 2.0.0.0 (X11/20070601) MIME-Version: 1.0 To: Tejun Heo Cc: Linus Torvalds , "Rafael J. Wysocki" , xfs@oss.sgi.com, "'linux-kernel@vger.kernel.org'" , linux-pm , Neil Brown Subject: Re: 2.6.22-rc3 hibernate(?) fails totally - regression (xfs on raid6) References: <46608E3F.4060201@dgreaves.com> <200706012342.45657.rjw@sisk.pl> <46609FAD.7010203@dgreaves.com> <200706020122.49989.rjw@sisk.pl> <4661EFBB.5010406@dgreaves.com> <4662D852.4000005@dgreaves.com> <46667160.80905@gmail.com> In-Reply-To: <46667160.80905@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35119 Lines: 791 Tejun Heo wrote: > Hello, > > David Greaves wrote: >> Linus Torvalds wrote: >>> It would be interesting to see what triggered it, since it apparently >>> worked before. So yes, a bisection would be great. >> Tejun, all the problematic patches are yours - so adding you. > > Ouch.... that's what everyone says! Just to be clear. This problem is where my system won't resume after s2d unless I umount my xfs over raid6 filesystem. >> given the first patch identified is >> 9666f4009c22f6520ac3fb8a19c9e32ab973e828: "libata: reimplement suspend/resume >> support using sdev->manage_start_stop" >> That seems a good candidate... > > 9ce3075c20d458040138690edfdf6446664ec3ee works, right? Yes git reset --hard ec4883b015c3212f6f6d04fb2ff45f528492f598 vi Makefile make oldconfig make && make install && make modules_install && update-grub init 6 > Can you test > 9666f4009c22f6520ac3fb8a19c9e32ab973e828 by removing > ata_scsi_device_suspend/resume callbacks from sata_via.c? Just delete > all lines referencing those two functions. There were one or two > fallouts from the conversion. Yes, after I posted I realised that Andrews patch fixed the compile failure :) git reset --hard 9666f4009c22f6520ac3fb8a19c9e32ab973e828 diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 939c924..bad87b5 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -117,8 +117,6 @@ static struct scsi_host_template svia_sht = { .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, #ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, #endif }; So now this compiles but it does cause the problem: umount /huge echo platform > /sys/power/disk echo disk > /sys/power/state # resumes fine mount /huge echo platform > /sys/power/disk echo disk > /sys/power/state # won't resume FWIW, /huge is: /dev/md0 on /huge type xfs (rw) cu:~# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] md0 : active raid6 sdf1[0] sde1[1] sdd1[2] sdc1[3] sdb1[4] sda1[5] hdb1[6] 1225557760 blocks level 6, 256k chunk, algorithm 2 [7/7] [UUUUUUU] bitmap: 0/234 pages [0KB], 512KB chunk unused devices: > > How many drives do you have? 8 in total 2 pata : VIA vt8237 2 sata on sata_via 4 sata on sata_promise +1 pata cdrom Behavior difference introduced by the > reimplementation is serialization of resume sequence, so it takes more > time. My test machine had problems resuming if resume took too long > even with the previous implementation. It didn't matter whether the > long resuming sequence is caused by too many controllers or explicit > ssleep(). If time needed for resume sequence is over certain threshold, > machine hangs while resuming. I thought it was a BIOS glitch and didn't > dig into it but you might be seeing the same issue. given the mount/umount thing this sounds unlikely... but what do I know? resume does throw up: ATA: abnormal status 0x7F on port 0x0001b007 ATA: abnormal status 0x7F on port 0x0001b007 ATA: abnormal status 0x7F on port 0x0001a407 ATA: abnormal status 0x7F on port 0x0001a407 which I've not noticed before... oh, alright, I'll check... reboots to 2.6.21, suspend, resume... nope, not output on resume in 2.6.21 > Please post dmesg too. Thanks. > Here is: dmesg from 2.6.22-9666f4009c22f6520ac3fb8a19c9e32ab973e828 (ie with sata_via fix) dmesg from resume of above when /huge is unmounted dmesg from resume of 2.6.21 Linux version 2.6.21-TejunTst2-g9666f400-dirty (root@cu.dgreaves.com) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #13 Wed Jun 6 10:16:03 BST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffc000 (usable) BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 262140) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262140 early_node_map[1] active PFN ranges 0: 0 -> 262140 On node 0 totalpages: 262140 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32509 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP 000F62A0, 0014 (r0 ASUS ) ACPI: RSDT 3FFFC000, 0030 (r1 ASUS A7V600 42302E31 MSFT 31313031) ACPI: FACP 3FFFC0B2, 0074 (r1 ASUS A7V600 42302E31 MSFT 31313031) ACPI: DSDT 3FFFC126, 2C4F (r1 ASUS A7V600 1000 MSFT 100000B) ACPI: FACS 3FFFF000, 0040 ACPI: BOOT 3FFFC030, 0028 (r1 ASUS A7V600 42302E31 MSFT 31313031) ACPI: APIC 3FFFC058, 005A (r1 ASUS A7V600 42302E31 MSFT 31313031) ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists. Total pages: 260093 Kernel command line: root=/dev/hda2 ro log_buf_len=128k log_buf_len: 131072 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1999.872 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034940k/1048560k available (2426k kernel code, 12968k reserved, 888k data, 188k init, 131056k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0440000 - 0xc046f000 ( 188 kB) .data : 0xc035e9ef - 0xc043cb90 ( 888 kB) .text : 0xc0100000 - 0xc035e9ef (2426 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4003.08 BogoMIPS (lpj=8006169) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Athlon(TM) MP stepping 00 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: enabled onboard AC97/MC97 devices ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNPB02F pnp: ACPI device : hid PNP0C02 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.20 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:00' and the driver 'system' pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0x3fffffff could not be reserved pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: match found with the PnP device '00:02' and the driver 'system' pnp: 00:02: ioport range 0xe400-0xe47f has been reserved pnp: 00:02: ioport range 0xe800-0xe81f has been reserved pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:02: iomem range 0xffb80000-0xffbfffff has been reserved pnp: match found with the PnP device '00:03' and the driver 'system' pnp: match found with the PnP device '00:0d' and the driver 'system' pnp: 00:0d: ioport range 0x290-0x297 has been reserved pnp: 00:0d: ioport range 0x370-0x375 has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x3a set to 0x1 Machine check exception polling timer started. highmem bounce pool size: 64 pages SGI XFS with ACLs, no debug enabled io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:00:0a.0 PCI: Bypassing VIA 8237 APIC De-Assert Message atyfb: using auxiliary register aperture atyfb: 3D RAGE II+ (Mach64 GU) [0x4755 rev 0x9a] atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. atyfb: BIOS frequency table: atyfb: PCLK_min_freq 926, PCLK_max_freq 22216, ref_freq 1432, ref_divider 33 atyfb: MCLK_pwd 4200, MCLK_max_freq 6000, XCLK_max_freq 6000, SCLK_freq 5000 atyfb: 4M EDO, 14.31818 MHz XTAL, 222 MHz PLL, 60 Mhz MCLK, 60 MHz XCLK Console: switching to colour frame buffer device 80x30 atyfb: fb0: ATY Mach64 frame buffer device on PCI input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... Switched to high resolution mode on CPU 0 hda: ST320420A, ATA DISK drive hdb: Maxtor 5A300J0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: PLEXTOR CD-R PX-W2410A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 hda3 hdb: max request size: 512KiB hdb: 585940320 sectors (300001 MB) w/2048KiB Cache, CHS=36473/255/63, UDMA(133) hdb: cache flushes supported hdb: hdb1 hdb2 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 sata_promise 0000:00:0d.0: version 2.07 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 17 scsi0 : sata_promise scsi1 : sata_promise scsi2 : sata_promise scsi3 : sata_promise ata1: SATA max UDMA/133 cmd 0xf880a200 ctl 0xf880a238 bmdma 0x00000000 irq 0 ata2: SATA max UDMA/133 cmd 0xf880a280 ctl 0xf880a2b8 bmdma 0x00000000 irq 0 ata3: SATA max UDMA/133 cmd 0xf880a300 ctl 0xf880a338 bmdma 0x00000000 irq 0 ata4: SATA max UDMA/133 cmd 0xf880a380 ctl 0xf880a3b8 bmdma 0x00000000 irq 0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata1.00: ATA-7: Maxtor 6B250S0, BANC19J0, max UDMA/133 ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32) ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata2.00: ATA-7: Maxtor 7Y250M0, YAR51EW0, max UDMA/133 ata2.00: 490234752 sectors, multi 0: LBA48 ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata2.00: configured for UDMA/133 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata3.00: ATA-7: Maxtor 7Y250M0, YAR51EW0, max UDMA/133 ata3.00: 490234752 sectors, multi 0: LBA48 ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata3.00: configured for UDMA/133 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata4.00: ATA-7: Maxtor 6B250S0, BANC1980, max UDMA/133 ata4.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32) ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Maxtor 6B250S0 BANC PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk scsi 2:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA Maxtor 6B250S0 BANC PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk sata_via 0000:00:0f.0: version 2.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 sata_via 0000:00:0f.0: routed to hard irq line 0 scsi4 : sata_via scsi5 : sata_via ata5: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001a802 bmdma 0x00019800 irq 0 ata6: SATA max UDMA/133 cmd 0x0001a400 ctl 0x0001a002 bmdma 0x00019808 irq 0 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x0001b007 ATA: abnormal status 0x7F on port 0x0001b007 ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata5.00: ATA-7: Maxtor 7B250S0, BANC1980, max UDMA/133 ata5.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata5.00: configured for UDMA/133 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x0001a407 ATA: abnormal status 0x7F on port 0x0001a407 ata6.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768 ata6.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 ata6.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata6.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768 ata6.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA Maxtor 7B250S0 BANC PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sd 4:0:0:0: [sde] Attached SCSI disk scsi 5:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 sd 5:0:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sd 5:0:0:0: [sdf] Attached SCSI disk pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0a' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0b' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 806 MB/s raid6: int32x2 1097 MB/s raid6: int32x4 694 MB/s raid6: int32x8 648 MB/s raid6: mmxx1 1683 MB/s raid6: mmxx2 3028 MB/s raid6: sse1x1 1622 MB/s raid6: sse1x2 2655 MB/s raid6: using algorithm sse1x2 (2655 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4201.000 MB/sec raid5: using function: pIII_sse (4201.000 MB/sec) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com TCP cubic registered Using IPI Shortcut mode input: ImPS/2 Logitech Wheel Mouse as /class/input/input3 md: Autodetecting RAID arrays. md: autorun ... md: considering sdf1 ... md: adding sdf1 ... md: adding sde1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: adding hdb1 ... md: created md0 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: raid5: device sdf1 operational as raid disk 0 raid5: device sde1 operational as raid disk 1 raid5: device sdd1 operational as raid disk 2 raid5: device sdc1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 4 raid5: device sda1 operational as raid disk 5 raid5: device hdb1 operational as raid disk 6 raid5: allocated 7316kB for md0 raid5: raid level 6 set md0 active with 7 out of 7 devices, algorithm 2 RAID5 conf printout: --- rd:7 wd:7 disk 0, o:1, dev:sdf1 disk 1, o:1, dev:sde1 disk 2, o:1, dev:sdd1 disk 3, o:1, dev:sdc1 disk 4, o:1, dev:sdb1 disk 5, o:1, dev:sda1 disk 6, o:1, dev:hdb1 md0: bitmap initialized from disk: read 15/15 pages, set 2 bits, status: 0 created bitmap (234 pages) for device md0 md: ... autorun DONE. Filesystem "hda2": Disabling barriers, not supported by the underlying device XFS mounting filesystem hda2 Ending clean XFS mount for filesystem: hda2 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 188k freed NET: Registered protocol family 1 PCI: Enabling device 0000:00:09.0 (0014 -> 0017) ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 18 skge 1.11 addr 0xf6000000 irq 18 chip Yukon rev 1 skge eth0: addr 00:0c:6e:f6:47:ee usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 19, io base 0x00008800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 19, io base 0x00008400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sk98lin: driver has been replaced by the skge driver and is scheduled for removal ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 19, io base 0x00008000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 19, io base 0x00007800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected vt596_smbus 0000:00:11.0: VT596_smba = 0xE800 i2c-adapter i2c-0: adapter [SMBus Via Pro adapter at e800] registered ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 19, io mem 0xf4000000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:11.5 to 64 codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] Adding 522100k swap on /dev/hda3. Priority:-1 extents:1 across:522100k Filesystem "hda2": Disabling barriers, not supported by the underlying device i2c-core: driver [eeprom] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50 i2c-adapter i2c-0: Transaction (pre): STS=42 CNT=14 CMD=00 ADD=a0 DAT=11,00 i2c-adapter i2c-0: SMBus busy (0x42). Resetting... i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a0 DAT=11,00 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a0 DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a0 DAT=11,00 i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0050 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x51 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a2 DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a2 DAT=11,00 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x52 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a4 DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a4 DAT=11,00 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a4 DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a4 DAT=11,00 i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0052 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x53 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a6 DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a6 DAT=11,00 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x54 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a8 DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a8 DAT=11,00 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x55 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=aa DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=aa DAT=11,00 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x56 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=ac DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=ac DAT=11,00 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x57 i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=ae DAT=11,00 i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=ae DAT=11,00 i2c-adapter i2c-9191: ISA main adapter registered it87: Found IT8712F chip at 0x290, revision 5 i2c-adapter i2c-9191: Driver it87-isa registered i2c-adapter i2c-9191: client [it8712] registered with bus id 9191-0290 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Filesystem "md0": Disabling barriers, not supported by the underlying device XFS mounting filesystem md0 Ending clean XFS mount for filesystem: md0 XFS mounting filesystem hdb2 Ending clean XFS mount for filesystem: hdb2 skge eth0: enabling interface skge eth0: Link is up at 1000 Mbps, full duplex, flow control both [I umount /dev/md0 here and then suspend2disk/resume] swsusp: Basic memory bitmaps created Stopping tasks ... done. Shrinking memory... done (0 pages freed) Freed 0 kbytes in 0.03 seconds (0.00 MB/s) Suspending console(s) sd 5:0:0:0: [sdf] Synchronizing SCSI cache sd 4:0:0:0: [sde] Synchronizing SCSI cache sd 3:0:0:0: [sdd] Synchronizing SCSI cache sd 2:0:0:0: [sdc] Synchronizing SCSI cache sd 1:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI: PCI interrupt for device 0000:00:11.5 disabled ACPI: PCI interrupt for device 0000:00:10.4 disabled ACPI: PCI interrupt for device 0000:00:10.3 disabled ACPI: PCI interrupt for device 0000:00:10.2 disabled ACPI: PCI interrupt for device 0000:00:10.1 disabled ACPI: PCI interrupt for device 0000:00:10.0 disabled ACPI: PCI interrupt for device 0000:00:0f.0 disabled skge eth0: disabling interface swsusp: critical section: swsusp: Need to copy 34443 pages Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. PCI: Setting latency timer of device 0000:00:01.0 to 64 PM: Writing back config space on device 0000:00:09.0 at offset 1 (was 2b00014, writing 2b00017) skge eth0: enabling interface Clocksource tsc unstable (delta = 4327744420428 ns) ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was 2900003, writing 2900007) ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 Time: acpi_pm clocksource has been installed. ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19 PM: Writing back config space on device 0000:00:10.4 at offset 3 (was 802008, writing 802010) usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:11.5 to 64 pnp: Res cnt 3 pnp: res cnt 3 pnp: Encode io pnp: Encode io pnp: Encode irq pnp: Failed to activate device 00:0a. pnp: Res cnt 1 pnp: res cnt 1 pnp: Encode irq pnp: Failed to activate device 00:0b. sd 0:0:0:0: [sda] Starting disk sd 1:0:0:0: [sdb] Starting disk sd 2:0:0:0: [sdc] Starting disk sd 3:0:0:0: [sdd] Starting disk sd 4:0:0:0: [sde] Starting disk ATA: abnormal status 0x7F on port 0x0001b007 ATA: abnormal status 0x7F on port 0x0001b007 ATA: abnormal status 0x7F on port 0x0001a407 ATA: abnormal status 0x7F on port 0x0001a407 ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 ata5.00: configured for UDMA/133 sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB) sd 5:0:0:0: [sdf] Starting disk sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata6.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768 ata6.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768 ata6.00: configured for UDMA/133 sd 5:0:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Restarting tasks ... done. swsusp: Basic memory bitmaps freed skge eth0: Link is up at 1000 Mbps, full duplex, flow control both [following is the dmesg of 2.6.21 post resume] Stopping tasks ... done. Shrinking memory... done (0 pages freed) Freed 0 kbytes in 0.03 seconds (0.00 MB/s) Suspending console(s) ACPI: PCI interrupt for device 0000:00:11.5 disabled ACPI: PCI interrupt for device 0000:00:10.4 disabled ACPI: PCI interrupt for device 0000:00:10.3 disabled ACPI: PCI interrupt for device 0000:00:10.2 disabled ACPI: PCI interrupt for device 0000:00:10.1 disabled ACPI: PCI interrupt for device 0000:00:10.0 disabled skge eth0: disabling interface swsusp: critical section: swsusp: Need to copy 34078 pages Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. PCI: Setting latency timer of device 0000:00:01.0 to 64 Clocksource tsc unstable (delta = 4337118157984 ns) Time: acpi_pm clocksource has been installed. PM: Writing back config space on device 0000:00:09.0 at offset 1 (was 2b00014, writing 2b00017) skge eth0: enabling interface ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19 PM: Writing back config space on device 0000:00:10.4 at offset 3 (was 802008, writing 802010) usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:11.5 to 64 pnp: Res cnt 3 pnp: res cnt 3 pnp: Encode io pnp: Encode io pnp: Encode irq pnp: Failed to activate device 00:0a. pnp: Res cnt 1 pnp: res cnt 1 pnp: Encode irq pnp: Failed to activate device 00:0b. logips2pp: Detected unknown logitech mouse model 1 Restarting tasks ... done. skge eth0: Link is up at 1000 Mbps, full duplex, flow control both - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/