Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sun, 31 Jul 2022 16:41:16 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     Julien Panis <jpanis@baylibre.com>
Cc:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        lars@metafoo.de, linux-iio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        mranostay@ti.com
Subject: Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver
 support for ECAP
Message-ID: <20220731164116.30e91f34@jic23-huawei>
In-Reply-To: <20220728175124.468461-3-jpanis@baylibre.com>
References: <20220728175124.468461-1-jpanis@baylibre.com>
        <20220728175124.468461-3-jpanis@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Thu, 28 Jul 2022 19:51:24 +0200
Julien Panis <jpanis@baylibre.com> wrote:

> ECAP hardware on AM62x SoC supports capture feature. It can be used
> to timestamp events (falling/rising edges) detected on signal input pin.
> 
> This commit adds capture driver support for ECAP hardware on AM62x SoC.
> 
> In the ECAP hardware, capture pin can also be configured to be in
> PWM mode. Current implementation only supports capture operating mode.
> Hardware also supports timebase sync between multiple instances, but
> this driver supports simple independent capture functionality.
> 
> Signed-off-by: Julien Panis <jpanis@baylibre.com>

Hi Julien,

So this isn't the first ecap driver we've had proposed, but the previous
one was a few years ago and never reached v2.
https://lore.kernel.org/all/20200818153614.6438-1-dts86@cornell.edu/

Honestly I can't remember much about it, but maybe the discussion around
that will be worth a reread.

The use of ABI here is unusual. So I'd definitely like to see some documentation
probably as a file in the main kernel documentation to explain what the interface
is an how that relates to what is being captured.

First thing to note here is the channel type of IIO_INDEX is now not actually
used any more because we moved all the relevant drivers over to the counter
subsystem (and we failed to mark it deprecated). 

Anyhow, I've reviewed below, but need docs to discuss this in depth.  In particular
the mix of buffers and events interfaces is unlikely to be an acceptable path
forwards.

Jonathan

> ---
>  drivers/iio/Kconfig               |   1 +
>  drivers/iio/Makefile              |   1 +
>  drivers/iio/time/Kconfig          |  22 ++
>  drivers/iio/time/Makefile         |   6 +
>  drivers/iio/time/capture-tiecap.c | 517 ++++++++++++++++++++++++++++++
>  5 files changed, 547 insertions(+)
>  create mode 100644 drivers/iio/time/Kconfig
>  create mode 100644 drivers/iio/time/Makefile
>  create mode 100644 drivers/iio/time/capture-tiecap.c
> 
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index b190846c3dc2..ba11b8824071 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -99,5 +99,6 @@ source "drivers/iio/pressure/Kconfig"
>  source "drivers/iio/proximity/Kconfig"
>  source "drivers/iio/resolver/Kconfig"
>  source "drivers/iio/temperature/Kconfig"
> +source "drivers/iio/time/Kconfig"
>  
>  endif # IIO
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index 3be08cdadd7e..09283402a2c6 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -42,4 +42,5 @@ obj-y += proximity/
>  obj-y += resolver/
>  obj-y += temperature/
>  obj-y += test/
> +obj-y += time/
>  obj-y += trigger/
> diff --git a/drivers/iio/time/Kconfig b/drivers/iio/time/Kconfig
> new file mode 100644
> index 000000000000..02f6cf7ff79e
> --- /dev/null
> +++ b/drivers/iio/time/Kconfig
> @@ -0,0 +1,22 @@
> +#
> +# Time drivers
> +#
> +
> +menu "Time"
> +
> +config CAPTURE_TIECAP
> +	tristate "ECAP capture support"
> +	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select IIO_BUFFER
> +	select IIO_KFIFO_BUF
> +	help
> +	  IIO driver support for the ECAP capture hardware found on TI SoCs.
> +
> +	  It can be used to timestamp events (falling/rising edges) detected
> +	  on signal input pin.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called capture-tiecap.
> +
> +endmenu
> diff --git a/drivers/iio/time/Makefile b/drivers/iio/time/Makefile
> new file mode 100644
> index 000000000000..3a27f3557d1e
> --- /dev/null
> +++ b/drivers/iio/time/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Makefile for industrial I/O Time drivers
> +#
> +
> +obj-$(CONFIG_CAPTURE_TIECAP) += capture-tiecap.o
> diff --git a/drivers/iio/time/capture-tiecap.c b/drivers/iio/time/capture-tiecap.c
> new file mode 100644
> index 000000000000..305011836ef3
> --- /dev/null
> +++ b/drivers/iio/time/capture-tiecap.c
> @@ -0,0 +1,517 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ECAP Capture driver
> + *
> + * Copyright (C) 2022 Julien Panis <jpanis@baylibre.com>
> + */
> +
> +#include <linux/module.h>
Headers preferred in alphabetical order but with more specific
headers in groups.

#include <linux/clk.h
...
#include <linux/regmap.h>

#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/kfifo_buf.h>


> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/of_device.h>
Bad sign.  What's this used for?  Unless absolutely necessary please use
linux/property.h interfaces.
Probably you should have 
linux/mod_devicetable.h for the of_device_id structure definition.


> +#include <linux/bitfield.h>
> +#include <linux/regmap.h>
> +#include <linux/interrupt.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/kfifo_buf.h>
> +
> +/* Registers */
> +#define ECAP_NB_CAP			4
> +
> +#define ECAP_TSCNT_REG			0x00
> +
> +#define ECAP_CAP_REG(i)		(((i) << 2) + 0x08)
> +
> +#define ECAP_ECCTL_REG			0x28
> +#define ECAP_CAPPOL_BIT(i)		BIT((i) << 1)
> +#define ECAP_EV_MODE_MASK		GENMASK(7, 0)
> +#define ECAP_CAPLDEN_BIT		BIT(8)
> +#define ECAP_EVTFLTPS_MASK		GENMASK(13, 9)
> +#define ECAP_PS_DEFAULT_VAL		0
> +#define ECAP_PS_MAX_VAL		31
> +#define ECAP_CONT_ONESHT_BIT		BIT(16)
> +#define ECAP_STOPVALUE_MASK		GENMASK(18, 17)
> +#define ECAP_REARM_RESET_BIT		BIT(19)
> +#define ECAP_TSCNTSTP_BIT		BIT(20)
> +#define ECAP_SYNCO_DIS_MASK		GENMASK(23, 22)
> +#define ECAP_CAP_APWM_BIT		BIT(25)
> +#define ECAP_ECCTL_EN_MASK		(ECAP_CAPLDEN_BIT | ECAP_TSCNTSTP_BIT)
> +#define ECAP_ECCTL_CFG_MASK		(ECAP_EVTFLTPS_MASK | ECAP_SYNCO_DIS_MASK	\
> +					| ECAP_STOPVALUE_MASK | ECAP_ECCTL_EN_MASK	\
> +					| ECAP_CAP_APWM_BIT | ECAP_CONT_ONESHT_BIT	\
> +					| ECAP_REARM_RESET_BIT)
> +
> +#define ECAP_ECINT_EN_FLG_REG		0x2c
> +#define ECAP_NB_CEVT			(ECAP_NB_CAP + 1)
> +#define ECAP_CEVT_EN_MASK		GENMASK(ECAP_NB_CEVT, 1)
> +#define ECAP_CEVT_FLG_BIT(i)		BIT((i) + 17)
> +#define ECAP_OVF_VAL			0xff
> +
> +#define ECAP_ECINT_CLR_FRC_REG	0x30
> +#define ECAP_INT_CLR_BIT		BIT(0)
> +#define ECAP_CEVT_CLR_BIT(i)		BIT((i) + 1)
> +#define ECAP_CEVT_CLR_MASK		GENMASK(ECAP_NB_CEVT, 0)
> +
> +#define ECAP_PID_REG			0x5c
> +
> +/*
> + * Event modes
> + * One bit for each CAPx register : 1 = falling edge / 0 = rising edge
> + * e.g. mode = 13 = 0xd = 0b1101
> + * -> falling edge for CAP1-3-4 / rising edge for CAP2
> + */
> +#define ECAP_NB_EV_MODES		GENMASK(ECAP_NB_CAP - 1, 0)
> +#define ECAP_EV_MODE_BIT(i)		BIT(i)
> +
> +static unsigned int prescaler = ECAP_PS_DEFAULT_VAL;
> +module_param(prescaler, uint, 0644);
> +MODULE_PARM_DESC(prescaler, "Input capture signal prescaler from 0 to "
> +		 __MODULE_STRING(ECAP_PS_MAX_VAL)", default "
> +		 __MODULE_STRING(ECAP_PS_DEFAULT_VAL));

What is this?  Needs a lot more description...  Right now I'd suggest it probably
either wants to be firmware provided (DT) or userspace controlled via proper ABI.

> +
> +static const struct regmap_config ecap_iio_regmap_config = {
> +	.reg_bits = 32,
> +	.reg_stride = 4,
> +	.val_bits = 32,
> +	.max_register = ECAP_PID_REG,
> +};
> +
> +/*
> + * struct ecap_iio_context - IIO device context
> + * @ev_mode:   event mode describing falling/rising edges for captures 1 to 4
> + * @time_cntr: timestamp counter value
> + */
> +struct ecap_iio_context {
> +	u8 ev_mode;
> +	unsigned int time_cntr;
> +};

I don't see advantage in defining this outside of ecap_iio_dev.
If the grouping is particular useful, feel free to embed the structure in there
and give it a name.

> +
> +/*
when in kernel-doc format use /**

> + * struct ecap_iio_data - IIO device data
> + * @ev_idx:  event index (0 to 3 for CAP1 to CAP4)

That's a long way from standard ABI.

> + * @ev_time: falling/rising edge timestamp
> + */
> +struct ecap_iio_data {
> +	u8 ev_idx;
> +	s64 ev_time __aligned(sizeof(s64));
> +};
> +
> +/*
> + * struct ecap_iio_dev - IIO device private data structure
> + * @enabled:  device state
> + * @clk:      device clock
> + * @clk_rate: device clock rate
> + * @regmap:   device register map
> + * @pm_ctx:   device context for PM operations
> + * @data:     device data
> + */
> +struct ecap_iio_dev {
> +	bool enabled;
> +	struct clk *clk;
> +	unsigned long clk_rate;
> +	struct regmap *regmap;
> +	struct ecap_iio_context pm_ctx;
> +	struct ecap_iio_data data;
> +};
> +
> +static u8 ecap_iio_capture_get_evmode(struct iio_dev *indio_dev)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +	u8 ev_mode = 0;
> +	unsigned int regval;
> +	int i;
> +
> +	pm_runtime_get_sync(indio_dev->dev.parent);
> +	regmap_read(ecap_dev->regmap, ECAP_ECCTL_REG, &regval);
> +	pm_runtime_put_sync(indio_dev->dev.parent);
> +
> +	for (i = 0 ; i < ECAP_NB_CAP ; i++) {
> +		if (regval & ECAP_CAPPOL_BIT(i))
> +			ev_mode |= ECAP_EV_MODE_BIT(i);
> +	}
> +
> +	return ev_mode;
> +}
> +
> +static void ecap_iio_capture_set_evmode(struct iio_dev *indio_dev, u8 ev_mode)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +	unsigned int regval = 0;
> +	int i;
> +
> +	for (i = 0 ; i < ECAP_NB_CAP ; i++) {
> +		if (ev_mode & ECAP_EV_MODE_BIT(i))
> +			regval |= ECAP_CAPPOL_BIT(i);
> +	}
> +
> +	pm_runtime_get_sync(indio_dev->dev.parent);
> +	regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_EV_MODE_MASK, regval);
> +	pm_runtime_put_sync(indio_dev->dev.parent);
> +}
> +
> +static void ecap_iio_capture_enable(struct iio_dev *indio_dev, bool rearm)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +	unsigned int regval = 0;
> +
> +	pm_runtime_get_sync(indio_dev->dev.parent);
> +
> +	/* Enable interrupts on events */
> +	regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG,
> +			   ECAP_CEVT_EN_MASK, ECAP_CEVT_EN_MASK);
> +
> +	/* Run counter */
> +	regval |= FIELD_PREP(ECAP_EVTFLTPS_MASK, prescaler)
> +		| ECAP_SYNCO_DIS_MASK | ECAP_STOPVALUE_MASK | ECAP_ECCTL_EN_MASK;
Should simply be
regval = ...
and don't set to 0 above.

> +	if (rearm) {
> +		regmap_write(ecap_dev->regmap, ECAP_TSCNT_REG, 0);
> +		regval |= ECAP_REARM_RESET_BIT;
> +	}
> +	regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_ECCTL_CFG_MASK, regval);
> +}
> +
> +static void ecap_iio_capture_disable(struct iio_dev *indio_dev)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	/* Disable interrupts on events */
> +	regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, ECAP_CEVT_EN_MASK, 0);
> +
> +	/* Stop counter */
> +	regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_ECCTL_EN_MASK, 0);
> +
> +	pm_runtime_put_sync(indio_dev->dev.parent);
> +}
> +
> +static int ecap_iio_read_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int *val, int *val2, long info)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	switch (info) {
> +	case IIO_CHAN_INFO_ENABLE:
> +		*val = ecap_dev->enabled;
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ecap_iio_write_raw(struct iio_dev *indio_dev,
> +			      struct iio_chan_spec const *chan,
> +			      int val, int val2, long info)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	switch (info) {
> +	case IIO_CHAN_INFO_ENABLE:
> +		if (val < 0 || val > 1)
> +			return -EINVAL;
> +		if (val == ecap_dev->enabled)
> +			return 0;
> +		if (val)
> +			ecap_iio_capture_enable(indio_dev, true);
> +		else
> +			ecap_iio_capture_disable(indio_dev);
> +		ecap_dev->enabled = val;
Blank line here.   Generally add one before any simple return
statements as it makes the flow a little more readable.

> +		return 0;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ecap_iio_read_event_value(struct iio_dev *indio_dev,
> +				     const struct iio_chan_spec *chan,
> +				     enum iio_event_type type,
> +				     enum iio_event_direction dir,
> +				     enum iio_event_info info,
> +				     int *val, int *val2)
> +{
> +	switch (info) {
> +	case IIO_EV_INFO_VALUE:
> +		switch (dir) {
> +		case IIO_EV_DIR_FALLING:
> +			*val = ecap_iio_capture_get_evmode(indio_dev);
> +			return IIO_VAL_INT;
> +		default:
> +			return -EINVAL;
> +		}
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ecap_iio_write_event_value(struct iio_dev *indio_dev,
> +				      const struct iio_chan_spec *chan,
> +				      enum iio_event_type type,
> +				      enum iio_event_direction dir,
> +				      enum iio_event_info info,
> +				      int val, int val2)
> +{
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	switch (info) {
> +	case IIO_EV_INFO_VALUE:
> +		switch (dir) {
> +		case IIO_EV_DIR_FALLING:
> +			if (val < 0 || val > ECAP_NB_EV_MODES)

So you are using a value as a magic enum to set mode?

Don't do that without documentation (and probably not acceptable then).
This is device specific ABI pretending to be generic.

> +				return -EINVAL;
> +			if (ecap_dev->enabled)
> +				return -EBUSY;
> +			ecap_iio_capture_set_evmode(indio_dev, val);
> +			return 0;
> +		default:
> +			return -EINVAL;
> +		}
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct iio_info ecap_iio_info = {
> +	.read_raw = ecap_iio_read_raw,
> +	.write_raw = ecap_iio_write_raw,
> +	.read_event_value = ecap_iio_read_event_value,
> +	.write_event_value = ecap_iio_write_event_value,
> +};
> +
> +static const struct iio_event_spec ecap_iio_events[] = {
> +	{
> +		.type = IIO_EV_TYPE_CHANGE,
> +		.dir = IIO_EV_DIR_FALLING,
> +		.mask_shared_by_all = BIT(IIO_EV_INFO_VALUE),
> +	},
> +};
> +
> +static const struct iio_chan_spec ecap_iio_channels[] = {
> +	{
> +		.scan_index = 0,
> +		.type = IIO_INDEX,
> +		.address = 0,
> +		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_ENABLE),
> +		.modified = 0,
C will initialize anything not specificed to 0 anyway, so just add
0 entries if they aren't the natural default (i.e. enums etc).

> +		.event_spec = ecap_iio_events,
> +		.num_event_specs = ARRAY_SIZE(ecap_iio_events),
> +		.scan_type = {
> +			.sign = 'u',
> +			.endianness = IIO_LE,
> +			.realbits = 2,
> +			.storagebits = 8,
> +			.shift = 0,
> +		},
> +	},
> +	IIO_CHAN_SOFT_TIMESTAMP(1),
> +};
> +
> +static irqreturn_t ecap_iio_isr(int irq, void *dev_id)
> +{
> +	struct iio_dev *indio_dev = dev_id;
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +	struct ecap_iio_data *ecap_data = &ecap_dev->data;
> +	unsigned int clr = 0;
> +	unsigned int flg;
> +	unsigned int cap_time;
> +	int i;
> +
> +	regmap_read(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, &flg);
> +
> +	for (i = 0 ; i < ECAP_NB_CEVT ; i++) {
> +		if (flg & ECAP_CEVT_FLG_BIT(i)) {
> +			if (i < ECAP_NB_CAP) {
> +				/*
> +				 * Input signal edge detected
> +				 * time_ns = 10^9 * time_cycles / clk_rate
> +				 */
> +				ecap_data->ev_idx = i;
> +				regmap_read(ecap_dev->regmap, ECAP_CAP_REG(i), &cap_time);
> +				ecap_data->ev_time = cap_time * NSEC_PER_SEC;
> +				do_div(ecap_data->ev_time, ecap_dev->clk_rate);
Is there any attempt to align that timestamp with the iio clock used for software timestamps?
> +			} else {
> +				/* Counter overflow */
> +				ecap_data->ev_idx = ECAP_OVF_VAL;
> +				ecap_data->ev_time = 0;

Don't push it if you've lost data.

> +			}
> +			iio_push_to_buffers(indio_dev, ecap_data);
> +
> +			clr |= ECAP_CEVT_CLR_BIT(i);
> +		}
> +	}
> +
> +	clr |= ECAP_INT_CLR_BIT;
> +	regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_CLR_FRC_REG, ECAP_CEVT_CLR_MASK, clr);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void ecap_iio_clk_disable(void *clk)
> +{
> +	clk_disable_unprepare(clk);
> +}
> +
> +static int ecap_iio_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct ecap_iio_dev *ecap_dev;
> +	struct iio_dev *indio_dev;
> +	void __iomem *mmio_base;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*ecap_dev));
> +	if (IS_ERR(indio_dev))
> +		return PTR_ERR(indio_dev);
> +
> +	ecap_dev = iio_priv(indio_dev);
> +
> +	ecap_dev->clk = devm_clk_get(dev, "fck");
> +	if (IS_ERR(ecap_dev->clk)) {
> +		dev_err(dev, "failed to get clock\n");
> +		return PTR_ERR(ecap_dev->clk);

Preference in probe() for using dev_err_probe() throughout.
It will handle any deferred probes that show up + does nicer message printing.

> +	}
> +
> +	ret = clk_prepare_enable(ecap_dev->clk);
There is a continuing effort to add devm support for clock management.
Not sure if it will land this cycle, but if it does please update to use
that.
https://lore.kernel.org/all/20220520075737.758761-1-u.kleine-koenig@pengutronix.de/

> +	if (ret) {
> +		dev_err(dev, "failed to enable clock\n");
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, ecap_iio_clk_disable, ecap_dev->clk);
> +	if (ret) {
> +		dev_err(dev, "failed to add clock disable action\n");
> +		return ret;
> +	}
> +
> +	ecap_dev->clk_rate = clk_get_rate(ecap_dev->clk);
> +	if (!ecap_dev->clk_rate) {
> +		dev_err(dev, "failed to get clock rate\n");
> +		return -EINVAL;
> +	}
> +
> +	if (prescaler > ECAP_PS_MAX_VAL) {
> +		prescaler = ECAP_PS_MAX_VAL;
> +		dev_warn(dev, "prescaler out of range, forced to %d\n", prescaler);
> +	}
> +
> +	mmio_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(mmio_base))
> +		return PTR_ERR(mmio_base);
> +
> +	ecap_dev->regmap = regmap_init_mmio(dev, mmio_base, &ecap_iio_regmap_config);

Mixing devm and non devm just makes for possible race conditions.
devm_regmap_init_mmio() should be fine here. If it's not I'd expect to see clear
comments saying why not.

> +	if (IS_ERR(ecap_dev->regmap)) {
> +		dev_err(dev, "failed to init regmap\n");
> +		return PTR_ERR(ecap_dev->regmap);
> +	}
> +
> +	indio_dev->name = devm_kasprintf(dev, GFP_KERNEL,
> +					 "ecap-iio-%p", mmio_base);
The name is a part number only, not instances specific.  The instance can usually
be easily established from other available info.  If you need to provide more information
there is a label attribute in the ABI (normally used for things like 'where' the sensor
is, but could be used for this as well).

> +	indio_dev->info = &ecap_iio_info;
> +	indio_dev->channels = ecap_iio_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(ecap_iio_channels);
> +	indio_dev->modes = INDIO_BUFFER_SOFTWARE;
> +
> +	ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev, NULL, NULL);

Might as well use the non _ext() variant that is just a wrapper around this
with one fewer parameter.

> +	if (ret) {
> +		dev_err(dev, "failed to setup iio buffer\n");
> +		return ret;
> +	}
> +
> +	ret = platform_get_irq(pdev, 0);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to get irq\n");
> +		return ret;
> +	}
> +
> +	ret = devm_request_irq(dev, ret, ecap_iio_isr, 0, pdev->name, indio_dev);
> +	if (ret) {
> +		dev_err(dev, "failed to request irq\n");
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, indio_dev);
> +	pm_runtime_enable(&pdev->dev);
> +
> +	ecap_dev->enabled = 0;

Will be set by default anyway as iio_priv() is kzalloc'd but
fine to leave it here if you think it adds documentation.

> +	ecap_iio_capture_set_evmode(indio_dev, 0);
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static int ecap_iio_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	if (ecap_dev->enabled)
> +		ecap_iio_capture_disable(indio_dev);
> +
> +	regmap_exit(ecap_dev->regmap);
> +
> +	pm_runtime_disable(&pdev->dev);

Order in remove should be reverse of probe() unless there is really
good reason why not.  Otherwise there tend to be race conditions
hiding.

> +
> +	return 0;
> +}
> +
> +static __maybe_unused int ecap_iio_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	/* If eCAP is running, stop capture then save timestamp counter */
> +	if (ecap_dev->enabled) {
> +		ecap_iio_capture_disable(indio_dev);
> +
> +		pm_runtime_get_sync(indio_dev->dev.parent);
> +		regmap_read(ecap_dev->regmap, ECAP_TSCNT_REG, &ecap_dev->pm_ctx.time_cntr);
> +		pm_runtime_put_sync(indio_dev->dev.parent);
> +	}
> +
> +	ecap_dev->pm_ctx.ev_mode = ecap_iio_capture_get_evmode(indio_dev);
> +
> +	return 0;
> +}
> +
> +static __maybe_unused int ecap_iio_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	ecap_iio_capture_set_evmode(indio_dev, ecap_dev->pm_ctx.ev_mode);
> +
> +	/* If eCAP was running, restore timestamp counter then run capture */
> +	if (ecap_dev->enabled) {
> +		pm_runtime_get_sync(indio_dev->dev.parent);
> +		regmap_write(ecap_dev->regmap, ECAP_TSCNT_REG, ecap_dev->pm_ctx.time_cntr);
> +		pm_runtime_put_sync(indio_dev->dev.parent);
> +
> +		ecap_iio_capture_enable(indio_dev, false);
> +	}
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ecap_iio_pm_ops, ecap_iio_suspend, ecap_iio_resume);

DEFINE_SIMPLE_DEV_PM_OPS() as per docs in pm.h which mark this version as deprecated.

> +
> +static const struct of_device_id ecap_iio_of_match[] = {
> +	{ .compatible	= "ti,am62-ecap-capture" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ecap_iio_of_match);
> +
> +static struct platform_driver ecap_iio_driver = {
> +	.probe = ecap_iio_probe,
> +	.remove = ecap_iio_remove,
> +	.driver = {
> +		.name = "ecap-capture",
> +		.of_match_table = of_match_ptr(ecap_iio_of_match),
Drop the of_match_ptr() protection.  It provides no real advantages and breaks
some non dt firmwares.

> +		.pm = &ecap_iio_pm_ops,

pm_sleep_ptr() and remove the __maybe_unused markings above as this new set
of pm macros lets the compiler remove the code without the need for that trickery.
 
> +	},
> +};
> +module_platform_driver(ecap_iio_driver);
> +
> +MODULE_DESCRIPTION("ECAP Capture driver");
> +MODULE_AUTHOR("Julien Panis <jpanis@baylibre.com>");
> +MODULE_LICENSE("GPL");