Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sun, 31 Jul 2022 21:17:43 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     Matti =?UTF-8?B?TGVodGltw6RraQ==?= <matti.lehtimaki@gmail.com>
Cc:     linux-iio@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht,
        Lars-Peter Clausen <lars@metafoo.de>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Alexandru Ardelean <aardelean@deviqon.com>,
        Cai Huoqing <cai.huoqing@linux.dev>,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
Message-ID: <20220731211743.6ab9264f@jic23-huawei>
In-Reply-To: <6c839ba3-b671-76fb-95e1-94bf2f2da303@gmail.com>
References: <20220724164316.68393-1-matti.lehtimaki@gmail.com>
        <20220731170057.2b8ac00e@jic23-huawei>
        <6c839ba3-b671-76fb-95e1-94bf2f2da303@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Sun, 31 Jul 2022 21:51:55 +0300
Matti Lehtim=C3=A4ki <matti.lehtimaki@gmail.com> wrote:

> On 31.7.2022 19.00, Jonathan Cameron wrote:
> > On Sun, 24 Jul 2022 19:43:15 +0300
> > Matti Lehtim=C3=A4ki <matti.lehtimaki@gmail.com> wrote:
> >  =20
> >> Some sensors do not always start fast enough to read a valid ID from
> >> registers at first attempt. Let's retry at most 3 times with short sle=
ep
> >> in between to fix random timing issues.
> >>
> >> Signed-off-by: Matti Lehtim=C3=A4ki <matti.lehtimaki@gmail.com> =20
> > Hi Matti,
> >=20
> > My gut feeling is this isn't in a fast path, so why not just wait
> > for whatever the documented power up time of the sensor is?
> >=20
> > I'd expect to see a sleep in st_sensors_power_enable() if one is
> > required. =20
>=20
> In the specification for the sensor (lis2hh12) I have on my device I
> found that the maximum boot time of the sensor (starting from Vdd power
> on) is defined as 20 ms. Not sure if the other sensors supported by the
> driver have different values but based on checking a couple of
> specifications I didn't find any bigger values so far.
>=20
> >> +			msleep(20); =20
> > How do we know 60msecs is long enough for all sensors? =20
>=20
> Based on the specification for the sensor I have and also driver used in
> Android kernel for my device (it uses a 3 x 20 ms loop) I think 20 ms is
> a good value but to be sure a slightly longer might make sense. As
> suggested in the other review comment by changing the regmap_read to
> regmap_read_poll_timeout the function doesn't always need to wait at
> least 20 ms in case first read doesn't provide the correct value, if a
> suitable shorter poll interval is used (something like 1-10 ms).
>=20
> However testing on my device has shown that I still need to have a loop
> or at least a retry possibility because I have noticed a rare random
> read error (-6, happens after some time not at first read) when reading
> the id from the hardware. This could be due to for example internal
> init failure of the sensor chip causing an internal reset. Because of
> this read error regmap_read_poll_timeout returns with an error and
> without retrying to read the id the sensor probe fails.

Nasty. If you can get a confirmation that it's a possible failure on startup
from the manufacturer then I'd be happier with that justification to retry
rather than just sleep for say 30msec after power on.

Jonathan

>=20
> -Matti