Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Loic Poulain <loic.poulain@linaro.org>,
        Robert Foss <robert.foss@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Cc:     corbet@lwn.net,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 1/5] arm64: dts: qcom: sdm845-db845c: drop power-domains from CCI I2C sensors
Date:   Tue,  2 Aug 2022 17:39:43 +0200
Message-Id: <20220802153947.44457-2-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220802153947.44457-1-krzysztof.kozlowski@linaro.org>
References: <20220802153947.44457-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Camera Control Interface I2C controller device node belongs to
TITAN_TOP_GDSC power domain, so its children do not need to specify it
again.  The OV7251 and OV8856 camera sensor bindings do not allow
power-domains.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Not tested on hardware.
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c6e2c571b452..b9304f81290a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1228,8 +1228,6 @@ camera@10 {
 		 * both have to be enabled through the power management
 		 * gpios.
 		 */
-		power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
 		dovdd-supply = <&vreg_lvs1a_1p8>;
 		avdd-supply = <&cam0_avdd_2v8>;
 		dvdd-supply = <&cam0_dvdd_1v2>;
@@ -1273,8 +1271,6 @@ camera@60 {
 		 *
 		 * No 1.2V vddd-supply regulator is used.
 		 */
-		power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
 		vdddo-supply = <&vreg_lvs1a_1p8>;
 		vdda-supply = <&cam3_avdd_2v8>;
 
-- 
2.34.1