Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Johan Hovold <johan+linaro@kernel.org>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 2/3] arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: disallow regulator mode switches
Date:   Wed,  3 Aug 2022 14:19:41 +0200
Message-Id: <20220803121942.30236-3-johan+linaro@kernel.org>
In-Reply-To: <20220803121942.30236-1-johan+linaro@kernel.org>
References: <20220803121942.30236-1-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Do not allow the RPMh regulators to switch to low-power mode.

This specifically avoids having regulators be but in low-power mode when
only some consumers specify loads while the actual total load really
warrants high-power mode.

Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Link: https://lore.kernel.org/all/YtkrDcjTGhpaU1e0@hovoldconsulting.com
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 84dc92dda0b8..562b4458e039 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -79,7 +79,6 @@ vreg_l3b: ldo3 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
@@ -88,7 +87,6 @@ vreg_l4b: ldo4 {
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 
 		vreg_l6b: ldo6 {
@@ -96,7 +94,6 @@ vreg_l6b: ldo6 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 			regulator-boot-on;
 			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
 		};
@@ -111,7 +108,6 @@ vreg_l1c: ldo1 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 
 		vreg_l12c: ldo12 {
@@ -119,7 +115,6 @@ vreg_l12c: ldo12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 
 		vreg_l13c: ldo13 {
@@ -127,7 +122,6 @@ vreg_l13c: ldo13 {
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 	};
 
@@ -142,7 +136,6 @@ vreg_l3d: ldo3 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 
 		vreg_l4d: ldo4 {
@@ -150,7 +143,6 @@ vreg_l4d: ldo4 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 
 		vreg_l7d: ldo7 {
@@ -158,7 +150,6 @@ vreg_l7d: ldo7 {
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 
 		vreg_l9d: ldo9 {
@@ -166,7 +157,6 @@ vreg_l9d: ldo9 {
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
 		};
 	};
 };
-- 
2.35.1