Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Feedback-ID: i0ad843c9:Fastmail
Subject: Re: [PATCH v2 3/4] regulator: dt-bindings: Add Allwinner D1 LDOs
To:     Rob Herring <robh@kernel.org>
Cc:     Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Maxime Ripard <mripard@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-sunxi@lists.linux.dev
References: <20220802053213.3645-1-samuel@sholland.org>
 <20220802053213.3645-4-samuel@sholland.org>
 <20220802150452.GA86158-robh@kernel.org>
From:   Samuel Holland <samuel@sholland.org>
Message-ID: <918a83a7-1b8d-04b1-4f7b-386fc800e653@sholland.org>
Date:   Wed, 3 Aug 2022 22:03:07 -0500
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.6.0
MIME-Version: 1.0
In-Reply-To: <20220802150452.GA86158-robh@kernel.org>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi Rob,

Thanks again for your review.

On 8/2/22 10:04 AM, Rob Herring wrote:
> On Tue, Aug 02, 2022 at 12:32:12AM -0500, Samuel Holland wrote:
>> The Allwinner D1 SoC contains two pairs of in-package LDOs. One pair is
>> for general purpose use. LDOA generally powers the board's 1.8 V rail.
>> LDOB generally powers the in-package DRAM, where applicable.
>>
>> The other pair of LDOs powers the analog power domains inside the SoC,
>> including the audio codec, thermal sensor, and ADCs. These LDOs require
>> a 0.9 V bandgap voltage reference. The calibration value for the voltage
>> reference is stored in an eFuse, accessed via an NVMEM cell.
>>
>> Neither LDO control register is in its own MMIO range; instead, each
>> regulator device relies on a regmap/syscon exported by its parent.
>>
>> Signed-off-by: Samuel Holland <samuel@sholland.org>
>> ---
>>
>> Changes in v2:
>>  - Remove syscon property from bindings
>>  - Update binding examples to fix warnings and provide context
>>
>>  .../allwinner,sun20i-d1-analog-ldos.yaml      | 65 +++++++++++++++++++
>>  .../allwinner,sun20i-d1-system-ldos.yaml      | 57 ++++++++++++++++
>>  2 files changed, 122 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
>>  create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
>> new file mode 100644
>> index 000000000000..19c984ef4e53
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml
>> @@ -0,0 +1,65 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-analog-ldos.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Allwinner D1 Analog LDOs
>> +
>> +description:
>> +  Allwinner D1 contains a set of LDOs which are designed to supply analog power
>> +  inside and outside the SoC. They are controlled by a register within the audio
>> +  codec MMIO space, but which is not part of the audio codec clock/reset domain.
>> +
>> +maintainers:
>> +  - Samuel Holland <samuel@sholland.org>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - allwinner,sun20i-d1-analog-ldos
>> +
>> +  nvmem-cells:
>> +    items:
>> +      - description: NVMEM cell for the calibrated bandgap reference trim value
>> +
>> +  nvmem-cell-names:
>> +    items:
>> +      - const: bg_trim
>> +
>> +patternProperties:
>> +  "^(aldo|hpldo)$":
> 
> '^(a|hp)ldo$'
> 
>> +    type: object
>> +    $ref: regulator.yaml#
> 
>        unevaluatedProperties: false
> 
>> +
>> +required:
>> +  - compatible
>> +  - nvmem-cells
>> +  - nvmem-cell-names
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    audio-codec@2030000 {
>> +        compatible = "simple-mfd", "syscon";
> 
> Needs a specific compatible. Obviously there's some other functionality 
> here if this is an 'audio-codec'.

I am not yet ready to submit the binding or driver for the audio codec, as I
still need to work out the details for jack detection (and some other issues).
If I added the specific audio codec compatible now, without the properties
required for the sound driver, that would create backward compatibility issues,
right?

My intention is to add the specific compatible along with the ASoC support.

> 'simple-mfd' also means the child nodes have zero dependence on the 
> parent node and its resources.

That is correct. The regulators have zero dependencies on the audio codec
resources (clocks/resets/etc.). The _only_ relationship is the overlapping
address of the MMIO register.

>> +        reg = <0x2030000 0x1000>;
>> +
>> +        regulators {
>> +            compatible = "allwinner,sun20i-d1-analog-ldos";
> 
> Is there a defined set of registers for these regulators? If so, put 
> them into 'reg'.

What do you suggest for 'ranges' in the parent device? I ask because the
SRAM/system controller binding requires an empty 'ranges' property.

With empty 'ranges', the child has to compute the relative address for use with
the parent's regmap, but maybe that is okay?

>> +            nvmem-cells = <&bg_trim>;
>> +            nvmem-cell-names = "bg_trim";
>> +
>> +            reg_aldo: aldo {
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +            };
>> +
>> +            reg_hpldo: hpldo {
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +            };
>> +        };
>> +    };
>> +
>> +...
>> diff --git a/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>> new file mode 100644
>> index 000000000000..c95030a827d6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>> @@ -0,0 +1,57 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Allwinner D1 System LDOs
>> +
>> +description:
>> +  Allwinner D1 contains a pair of general-purpose LDOs which are designed to
>> +  supply power inside and outside the SoC. They are controlled by a register
>> +  within the system control MMIO space.
>> +
>> +maintainers:
>> +  - Samuel Holland <samuel@sholland.org>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - allwinner,sun20i-d1-system-ldos
>> +
>> +patternProperties:
>> +  "^(ldoa|ldob)$":
> 
> '^ldo[ab]$'
> 
> Any reason the naming is not consistent with 'ldo' as the prefix or 
> suffix?

All four names match the pin names from the SoC datasheet.

>> +    type: object
>> +    $ref: regulator.yaml#
> 
>        unevaluatedProperties: false

I will fix these for v3.

Regards,
Samuel

>> +
>> +required:
>> +  - compatible
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    syscon@3000000 {
>> +        compatible = "allwinner,sun20i-d1-system-control";
>> +        reg = <0x3000000 0x1000>;
>> +        ranges;
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +
>> +        regulators {
>> +            compatible = "allwinner,sun20i-d1-system-ldos";
>> +
>> +            reg_ldoa: ldoa {
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +            };
>> +
>> +            reg_ldob: ldob {
>> +                regulator-name = "vcc-dram";
>> +                regulator-min-microvolt = <1500000>;
>> +                regulator-max-microvolt = <1500000>;
>> +            };
>> +        };
>> +    };
>> +
>> +...
>> -- 
>> 2.35.1
>>
>>