Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <c3060197-ef5c-ad41-1c18-9d39641d1ad6@linaro.org>
Date:   Fri, 5 Aug 2022 08:57:26 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.12.0
Subject: Re: [PATCH v1 3/3] firmware: imx: add imx-scu GPIO driver
Content-Language: en-US
To:     Shenwei Wang <shenwei.wang@nxp.com>, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linus.walleij@linaro.org,
        brgl@bgdev.pl, shawnguo@kernel.org, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org
References: <20220804184908.470216-1-shenwei.wang@nxp.com>
 <20220804184908.470216-4-shenwei.wang@nxp.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220804184908.470216-4-shenwei.wang@nxp.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 04/08/2022 20:49, Shenwei Wang wrote:
> The SCU firmware on i.MX8 platforms provides a set of APIs to
> control the GPIO PINs on the SCU domain. This patch implements the
> standard GPIO driver interface to access those PINs on the
> SCU domain over the SCU APIs.
> 
> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
> ---
>  drivers/firmware/imx/Kconfig        |   6 ++
>  drivers/firmware/imx/Makefile       |   1 +
>  drivers/firmware/imx/imx-scu-gpio.c | 139 ++++++++++++++++++++++++++++
>  3 files changed, 146 insertions(+)
>  create mode 100644 drivers/firmware/imx/imx-scu-gpio.c
> 
> diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
> index c027d99f2a59..484c13f3149a 100644
> --- a/drivers/firmware/imx/Kconfig
> +++ b/drivers/firmware/imx/Kconfig
> @@ -28,3 +28,9 @@ config IMX_SCU_PD
>  	depends on IMX_SCU
>  	help
>  	  The System Controller Firmware (SCFW) based power domain driver.
> +
> +config IMX_SCU_GPIO
> +       def_bool y
> +       depends on IMX_SCU
> +       help
> +         Say Y here to enable the imx8 gpio over SCFW MISC API

gpio driver go to drivers/gpio/

Best regards,
Krzysztof