Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <7507e07a-5094-f129-b75a-69cc32147543@redhat.com>
Date:   Mon, 8 Aug 2022 11:16:20 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.10.0
Subject: Re: [PATCH] HID: HID-rmi - ignore to rmi_hid_read_block after system
 resumes.
Content-Language: en-US
To:     margeyang <marge.yang@synaptics.corp-partner.google.com>,
        dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
        linux-kernel@vger.kernel.org, benjamin.tissoires@redhat.com
Cc:     marge.yang@tw.synaptics.com, derek.cheng@tw.synaptcs.com,
        vincent.huang@tw.synaptics.com
References: <1659949639-3127-1-git-send-email-marge.yang@synaptics.corp-partner.google.com>
From:   Hans de Goede <hdegoede@redhat.com>
In-Reply-To: <1659949639-3127-1-git-send-email-marge.yang@synaptics.corp-partner.google.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

On 8/8/22 11:07, margeyang wrote:
> From: Marge Yang <marge.yang@synaptics.corp-partner.google.com>
> 
> The interrupt GPIO will be pulled down once
> after RMI driver reads this command(Report ID:0x0A).
> It will cause "Dark resume test fail" for chromebook device.
> Hence, TP driver will ignore rmi_hid_read_block function once
> after system resumes.

This sounds like it is an issue in one specific touchpad model,
yet you are changing the code to ignore the first readblock call
on resume on *all* models ?

Regards,

Hans


> 
> Signed-off-by: Marge Yang<marge.yang@synaptics.corp-partner.google.com>
> ---
>  drivers/hid/hid-rmi.c | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
> index 311eee599ce9..236a38bfcf9a 100644
> --- a/drivers/hid/hid-rmi.c
> +++ b/drivers/hid/hid-rmi.c
> @@ -101,7 +101,7 @@ struct rmi_data {
>  };
>  
>  #define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
> -
> +int ignoreonce;
>  static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
>  
>  /**
> @@ -203,7 +203,13 @@ static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
>  		if (ret < 0)
>  			goto exit;
>  	}
> -
> +	if (ignoreonce == 1) {
> +		dev_err(&hdev->dev,
> +			"ignoreonce (%d)\n",
> +			ignoreonce);
> +		ignoreonce = 0;
> +		goto exit;
> +	}
>  	for (retries = 5; retries > 0; retries--) {
>  		data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
>  		data->writeReport[1] = 0; /* old 1 byte read count */
> @@ -468,8 +474,12 @@ static int rmi_post_resume(struct hid_device *hdev)
>  	ret = hid_hw_open(hdev);
>  	if (ret)
>  		return ret;
> -
> +	// Avoid to read rmi_hid_read_block once after system resumes.
> +	// The interrupt will be pulled down
> +	// after RMI Read command(Report ID:0x0A).
> +	ignoreonce = 1;
>  	ret = rmi_reset_attn_mode(hdev);
> +	ignoreonce = 0;
>  	if (ret)
>  		goto out;
>