Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   luca.ceresoli@bootlin.com
To:     linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org
Cc:     Luca Ceresoli <luca.ceresoli@bootlin.com>,
        Wolfram Sang <wsa@kernel.org>, Peter Rosin <peda@axentia.se>,
        linux-kernel@vger.kernel.org
Subject: [PATCH 2/9] docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
Date:   Mon,  8 Aug 2022 16:17:01 +0200
Message-Id: <20220808141708.1021103-3-luca.ceresoli@bootlin.com>
In-Reply-To: <20220808141708.1021103-1-luca.ceresoli@bootlin.com>
References: <20220808141708.1021103-1-luca.ceresoli@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Luca Ceresoli <luca.ceresoli@bootlin.com>

"as usual" does not mean much here, especially as these are introductory
sections and 10-bit addressing hasn't been introduced yet.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
 Documentation/i2c/i2c-protocol.rst   | 2 +-
 Documentation/i2c/smbus-protocol.rst | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 9ecf03f5de33..7ffada1f3335 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -13,7 +13,7 @@ S               Start condition
 P               Stop condition
 Rd/Wr (1 bit)   Read/Write bit. Rd equals 1, Wr equals 0.
 A, NA (1 bit)   Acknowledge (ACK) and Not Acknowledge (NACK) bit
-Addr  (7 bits)  I2C 7 bit address. Note that this can be expanded as usual to
+Addr  (7 bits)  I2C 7 bit address. Note that this can be expanded to
                 get a 10 bit I2C address.
 Comm  (8 bits)  Command byte, a data byte which often selects a register on
                 the device.
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 00d8e17d0aca..55e209c7e520 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -41,7 +41,7 @@ Sr              Repeated start condition, used to switch from write to
 P               Stop condition
 Rd/Wr (1 bit)   Read/Write bit. Rd equals 1, Wr equals 0.
 A, NA (1 bit)   Acknowledge (ACK) and Not Acknowledge (NACK) bit
-Addr  (7 bits)  I2C 7 bit address. Note that this can be expanded as usual to
+Addr  (7 bits)  I2C 7 bit address. Note that this can be expanded to
                 get a 10 bit I2C address.
 Comm  (8 bits)  Command byte, a data byte which often selects a register on
                 the device.
-- 
2.34.1