Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   <patrice.chotard@foss.st.com>
To:     Mark Brown <broonie@kernel.org>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
CC:     <linux-spi@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <christophe.kerello@foss.st.com>,
        <patrice.chotard@foss.st.com>, <devicetree@vger.kernel.org>
Subject: [PATCH v2 0/2] spi: stm32_qspi: use QSPI bus as 8 lines communication channel
Date:   Wed, 10 Aug 2022 11:32:13 +0200
Message-ID: <20220810093215.794977-1-patrice.chotard@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Patrice Chotard <patrice.chotard@foss.st.com>


The goal of this series is to allow to use QSPI bus as a 8 lines communication 
channel for specific purpose.

The QSPI block offers the possibility to communicate with 2 flashes in 
parrallel using the dual flash mode, 8 data lines are then used.
Usage of DT parallel-memories property is needed to enable dual flash mode.

The addition of the legacy transfer_one_message() spi callback is also needed
as currently the stm32-qspi driver only supports spi_controller_mem_ops API.


 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi |  50 +++++++----
 arch/arm/boot/dts/stm32mp157c-ev1.dts    |  12 ++-
 drivers/spi/spi-stm32-qspi.c             | 103 +++++++++++++++++++++--
 3 files changed, 139 insertions(+), 26 deletions(-)

-- 
2.25.1