Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <13fcaa01-d2c0-e57f-bedc-b2e0536a55f9@linaro.org>
Date:   Fri, 12 Aug 2022 13:49:19 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.12.0
Subject: Re: [PATCH 2/4] dt-bindings: display: sun6i-dsi: Add the A100 variant
Content-Language: en-US
To:     Samuel Holland <samuel@sholland.org>, Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Maxime Ripard <mripard@kernel.org>
Cc:     Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
        Jagan Teki <jagan@amarulasolutions.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        dri-devel@lists.freedesktop.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-sunxi@lists.linux.dev
References: <20220812074257.58254-1-samuel@sholland.org>
 <20220812074257.58254-3-samuel@sholland.org>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220812074257.58254-3-samuel@sholland.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 12/08/2022 10:42, Samuel Holland wrote:
> The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
> same register layout as previous SoC integrations. However, its module
> clock now comes from the TCON, which means it no longer runs at a fixed
> rate, so this needs to be distinguished in the driver.
> 
> The controller also now uses pins on Port D instead of dedicated pins,
> so it drops the separate power domain.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> Removal of the vcc-dsi-supply is maybe a bit questionable. Since there
> is no "VCC-DSI" pin anymore, it's not obvious which pin actually does
> power the DSI controller/PHY. Possibly power comes from VCC-PD or VCC-IO
> or VCC-LVDS. So far, all boards have all of these as always-on supplies,
> so it is hard to test.
> 
>  .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 +++++++++++++++----
>  1 file changed, 23 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
> index ae55ef3fb1fe..c53c25b87bd4 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
> @@ -12,9 +12,14 @@ maintainers:
>  
>  properties:
>    compatible:
> -    enum:
> -      - allwinner,sun6i-a31-mipi-dsi
> -      - allwinner,sun50i-a64-mipi-dsi
> +    oneOf:
> +      - enum:
> +          - allwinner,sun6i-a31-mipi-dsi
> +          - allwinner,sun50i-a64-mipi-dsi
> +          - allwinner,sun50i-a100-mipi-dsi

While you are moving code, how about bringing alphabetical order?

> +      - items:
> +          - const: allwinner,sun20i-d1-mipi-dsi
> +          - const: allwinner,sun50i-a100-mipi-dsi
>  
>    reg:
>      maxItems: 1
> @@ -59,7 +64,6 @@ required:
>    - phys
>    - phy-names
>    - resets
> -  - vcc-dsi-supply
>    - port
>  
>  allOf:
> @@ -68,7 +72,9 @@ allOf:
>        properties:
>          compatible:
>            contains:
> -            const: allwinner,sun6i-a31-mipi-dsi
> +            enum:
> +              - allwinner,sun6i-a31-mipi-dsi
> +              - allwinner,sun50i-a100-mipi-dsi

Here as well

>  
>      then:
>        properties:
> @@ -83,6 +89,18 @@ allOf:
>          clocks:
>            maxItems: 1
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - allwinner,sun6i-a31-mipi-dsi
> +              - allwinner,sun50i-a64-mipi-dsi

and here


Best regards,
Krzysztof