Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rob Herring <robh@kernel.org>
To:     wei.fang@nxp.com
Cc:     andrew@lunn.ch, pabeni@redhat.com, robh+dt@kernel.org,
        f.fainelli@gmail.com, hkallweit1@gmail.com, netdev@vger.kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-kernel@vger.kernel.org,
        davem@davemloft.net, linux@armlinux.org.uk, edumazet@google.com,
        kuba@kernel.org, devicetree@vger.kernel.org
In-Reply-To: <20220812145009.1229094-2-wei.fang@nxp.com>
References: <20220812145009.1229094-1-wei.fang@nxp.com> <20220812145009.1229094-2-wei.fang@nxp.com>
Subject: Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property
Date:   Fri, 12 Aug 2022 09:13:53 -0600
Message-Id: <1660317233.459028.168985.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Sat, 13 Aug 2022 00:50:08 +1000, wei.fang@nxp.com wrote:
> From: Wei Fang <wei.fang@nxp.com>
> 
> The hibernation mode of Atheros AR803x PHYs is default enabled.
> When the cable is unplugged, the PHY will enter hibernation
> mode and the PHY clock does down. For some MACs, it needs the
> clock to support it's logic. For instance, stmmac needs the PHY
> inputs clock is present for software reset completion. Therefore,
> It is reasonable to add a DT property to disable hibernation mode.
> 
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
> ---
>  Documentation/devicetree/bindings/net/qca,ar803x.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/qca,ar803x.yaml:46:5: [error] syntax error: could not find expected ':' (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/net/qca,ar803x.example.dts'
Documentation/devicetree/bindings/net/qca,ar803x.yaml:46:5: could not find expected ':'
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/qca,ar803x.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/qca,ar803x.yaml:46:5: could not find expected ':'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/qca,ar803x.yaml: ignoring, error parsing file
make: *** [Makefile:1404: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.