Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 12 Aug 2022 17:36:24 +0200
From:   Andrew Lunn <andrew@lunn.ch>
To:     wei.fang@nxp.com
Cc:     hkallweit1@gmail.com, linux@armlinux.org.uk, davem@davemloft.net,
        edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        f.fainelli@gmail.com, netdev@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property
Message-ID: <YvZzeDaeHC0W7+Mh@lunn.ch>
References: <20220812145009.1229094-1-wei.fang@nxp.com>
 <20220812145009.1229094-2-wei.fang@nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220812145009.1229094-2-wei.fang@nxp.com>
Precedence: bulk

On Sat, Aug 13, 2022 at 12:50:08AM +1000, wei.fang@nxp.com wrote:
> From: Wei Fang <wei.fang@nxp.com>
> 
> The hibernation mode of Atheros AR803x PHYs is default enabled.
> When the cable is unplugged, the PHY will enter hibernation
> mode and the PHY clock does down. For some MACs, it needs the
> clock to support it's logic. For instance, stmmac needs the PHY
> inputs clock is present for software reset completion. Therefore,
> It is reasonable to add a DT property to disable hibernation mode.
> 
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
> ---
>  Documentation/devicetree/bindings/net/qca,ar803x.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> index b3d4013b7ca6..d08431d79b83 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> @@ -40,6 +40,12 @@ properties:
>        Only supported on the AR8031.
>      type: boolean
>  
> +  qca,disable-hibernation:
> +    description: |
> +    If set, the PHY will not enter hibernation mode when the cable is
> +    unplugged.
> +    type: boolean

The description itself needs indenting 2 space.

I would suggest you do what the bot suggests and install the dtschema
tools.

	Andrew