Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <1660225318-4063-1-git-send-email-u0084500@gmail.com>
 <1660225318-4063-2-git-send-email-u0084500@gmail.com> <3cae9d60-4012-1dfd-abd9-4d0b9379e6bb@linaro.org>
 <CADiBU3_depGDZtiyizU3MB939A3oH1uTWzTMyruUy0z=u6BZkQ@mail.gmail.com> <40261b95-637a-1304-2e06-8c8ff7fc377b@linaro.org>
In-Reply-To: <40261b95-637a-1304-2e06-8c8ff7fc377b@linaro.org>
From:   ChiYuan Huang <u0084500@gmail.com>
Date:   Fri, 12 Aug 2022 23:57:56 +0800
Message-ID: <CADiBU38+9sR1r20=YWt-9s2+u7maHH+1VudCnV1-0+F4jYKdQQ@mail.gmail.com>
Subject: Re: [PATCH 1/2] dt-bindings: power: supply: Add Richtek RT9471
 battery charger
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Sebastian Reichel <sre@kernel.org>,
        =?UTF-8?B?5ri45a2Q6aao?= <alina_yu@richtek.com>,
        cy_huang <cy_huang@richtek.com>, alinayu829@gmail.com,
        Linux PM <linux-pm@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>, lkml <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> =E6=96=BC 2022=E5=B9=
=B48=E6=9C=8812=E6=97=A5 =E9=80=B1=E4=BA=94 =E4=B8=8B=E5=8D=882:54=E5=AF=AB=
=E9=81=93=EF=BC=9A
>
> On 12/08/2022 04:32, ChiYuan Huang wrote:
> > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> =E6=96=BC 2022=E5=
=B9=B48=E6=9C=8811=E6=97=A5 =E9=80=B1=E5=9B=9B =E6=99=9A=E4=B8=8A10:12=E5=
=AF=AB=E9=81=93=EF=BC=9A
> >>
> >> On 11/08/2022 16:41, cy_huang wrote:
> >>> From: ChiYuan Huang <cy_huang@richtek.com>
> >>>
> >>> Add bindings for the Richtek RT9471 I2C controlled battery charger.
> >>>
> >>
> >> Thank you for your patch. There is something to discuss/improve.
> >>
> >>> +properties:
> >>> +  compatible:
> >>> +    const: richtek,rt9471
> >>> +
> >>> +  reg:
> >>> +    maxItems: 1
> >>> +
> >>> +  ceb-gpios:
> >>> +    maxItems: 1
> >>
> >> This looks not standard, so please provide a description.
> > It's the external 'charge enable' pin that's used to control battery ch=
arging.
> > The priority is higher than the register 'CHG_EN' control.
> > In the word, 'b' means it's reverse logic, low to allow charging, high
> > to force disable charging.
>
> Isn't this standard enable-gpios property?
Not the same thing, this charger includes power patch control.
This gpio is used to 'force disable' charge the battery.
>
> >
> > description:
> >   External charge enable pin that can force control not to charge the b=
attery.
> >   Low to allow charging, high to disable charging.
> >
> >>
> >>> +
> >>> +  wakeup-source: true
> >>> +
> >>> +  interrupts:
> >>> +    maxItems: 1
> >>> +
> >>> +  interrupt-controller: true
> >>> +
> >>> +  "#interrupt-cells":
> >>> +    const: 1
> >>
> >> Why a charger driver is a interrupt-controller?
> > There're 32 nested IRQs from RT9471.
> > The original thought is to make the user easy to bind the interrupt
> > into their driver.
>
> Bindings are not related to the driver but to hardware...
>
Sorry, I mislead  your comment.
Refer to bq2515x.yaml, I think it's better to change this property to
'charge-enable-gpios'.
It's the same usage like as TI charger.
> >
> > For charger driver, does it mean legacy IRQ handler is more preferred?
>
> Who is the consumer of these interrupts? Can you show the DTS with the
> interrupt consumer?
>
> >>
> >>> +
> >>> +  usb-otg-vbus-regulator:
> >>> +    type: object
> >>> +    unevaluatedProperties: false
> >>> +    $ref: /schemas/regulator/regulator.yaml#
> >>> +
> >>> +required:
> >>> +  - compatible
> >>> +  - reg
> >>> +  - wakeup-source
> >>> +  - interrupts
> >>> +  - interrupt-controller
> >>> +  - "#interrupt-cells"
> >>> +
> >>> +additionalProperties: false
> >>> +
> >>> +examples:
> >>> +  - |
> >>> +    #include <dt-bindings/interrupt-controller/irq.h>
> >>> +    i2c {
> >>> +      #address-cells =3D <1>;
> >>> +      #size-cells =3D <0>;
> >>> +
> >>> +      charger@53 {
> >>> +        compatible =3D "richtek,rt9471";
> >>> +        reg =3D <0x53>;
> >>> +        ceb-gpios =3D <&gpio26 1 0>;
> >>
> >> Isn't the last value a GPIO flag? If yes, use appropriate define.
> > I already specify GPIOD_OUT_LOW in the gpiod_request flag.
>
> It is not related to the DTS. Anyway writing "low" for a meaning of high
> is not correct usually...
>
> > Do I need to convert the gpio request code to GPIOD_OUT_HIGH,
> > and specify here as GPIO_ACTIVE_LOW?
>
> You need to properly describe the hardware. The polarity of logical
> signal is defined by DTS, not by driver. It does not make sense to do it
> in driver. What if on some board the signal is inverted?
>
From our discussion, binding example just keep the active level that the pi=
n is.
So 'GPIO_ACTIVE_LOW', thanks.

All of the above will be fixed in the next revision.

> Best regards,
> Krzysztof