Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 13 Aug 2022 11:21:03 -0700
From:   Nate Yocom <nate@yocom.org>
To:     Bastien Nocera <hadess@hadess.net>
Cc:     dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] Input: joystick: xpad: Add X-Box Adaptive Controller
 support
Message-ID: <Yvfrj11PBPmNXHeN@ghaven-kernel>
References: <20220810141511.11827-1-nate@yocom.org>
 <32f116c30f1f071d57e8e2d15425178cbccf9b70.camel@hadess.net>
 <Yvfa3BZ1z0bNq8sN@ghaven-kernel>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <Yvfa3BZ1z0bNq8sN@ghaven-kernel>
Precedence: bulk

On Sat, Aug 13, 2022 at 10:09:48AM -0700, Nate Yocom wrote:
> On Thu, Aug 11, 2022 at 03:19:50PM +0200, Bastien Nocera wrote:
> > Hey,
> > 
> > On Wed, 2022-08-10 at 07:15 -0700, Nate Yocom wrote:
> > > +               /*
> > > +                * X-Box Adaptive controller sets 0x02 when x-box
> > > button is pressed,
> > > +                * we could probably condense into just data[4] != 0,
> > > but explicitly
> > > +                * checking here ensures no regression if other
> > > devices set other bits.
> > > +                */
> > > +               if (le16_to_cpu(xpad->dev->id.vendor) == 0x045e &&
> > > +                       le16_to_cpu(xpad->dev->id.product) == 0x0b0a)
> > > +                       input_report_key(dev, BTN_MODE, data[4] &
> > > 0x02);
> > > +               else
> > > +                       input_report_key(dev, BTN_MODE, data[4] &
> > > 0x01);
> > 
> > 
> > I won't be able to test the patch until next week, but I would actually
> > implement what you mention in the comment as a separate patch. This
> > would avoid having a special-case for a specific VID/PID without a
> > quirk like "MAP_LAYER_BUTTON" defined, and if it were to cause
> > problems, it would be straight forward to revert.
> 
> Thanks for the feedback, should I make this a series of 3 successive patches then?
> 
>  1) Add the device to xpad_device[]
>  2) Support the Layer button with MAP_LAYER_BUTTON
>  3) Support the X-Box button (as suggested in the comment instead of
>  VID/PID checks)

Actually, it occurs to me that I can just mask for 0x03 to allow both
existing and the new controller to work - without a VID/PID check.  I'll
test and break into a multipart patch v3 shortly.