Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Feedback-ID: i0ad843c9:Fastmail
Subject: Re: [PATCH v3 2/4] regulator: sun20i: Add support for Allwinner D1
 LDOs
To:     =?UTF-8?Q?Heiko_St=c3=bcbner?= <heiko@sntech.de>
Cc:     Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-kernel@lists.infradead.org,
        Maxime Ripard <mripard@kernel.org>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
References: <20220815043436.20170-1-samuel@sholland.org>
 <20220815043436.20170-3-samuel@sholland.org> <37742446.J2Yia2DhmK@diego>
From:   Samuel Holland <samuel@sholland.org>
Message-ID: <1c172085-9586-b612-8600-776e8a394f12@sholland.org>
Date:   Wed, 17 Aug 2022 03:28:40 -0500
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.6.0
MIME-Version: 1.0
In-Reply-To: <37742446.J2Yia2DhmK@diego>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 8/15/22 12:00 PM, Heiko Stübner wrote:
> Am Montag, 15. August 2022, 06:34:33 CEST schrieb Samuel Holland:
>> D1 contains two pairs of LDOs. Since they have similar bindings, and
>> they always exist together, put them in a single driver.
>>
>> The analog LDOs are relatively boring, with a single linear range. Their
>> one quirk is that a bandgap reference must be calibrated for them to
>> produce the correct voltage.
>>
>> The system LDOs have the complication that their voltage step is not an
>> integer, so a custom .list_voltage is needed to get the rounding right.
>>
>> Signed-off-by: Samuel Holland <samuel@sholland.org>
>> ---
>>
>> Changes in v3:
>>  - Adjust control flow in sun20i_regulator_get_regmap() for clarity
>>
>> Changes in v2:
>>  - Use decimal numbers for .n_voltages instead of field widths
>>  - Get the regmap from the parent device instead of a property/phandle
>>
>>  drivers/regulator/Kconfig            |   8 +
>>  drivers/regulator/Makefile           |   1 +
>>  drivers/regulator/sun20i-regulator.c | 232 +++++++++++++++++++++++++++
>>  3 files changed, 241 insertions(+)
>>  create mode 100644 drivers/regulator/sun20i-regulator.c
>>
>> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
>> index 23e3e4a35cc9..0c5727173fa0 100644
>> --- a/drivers/regulator/Kconfig
>> +++ b/drivers/regulator/Kconfig
>> @@ -1262,6 +1262,14 @@ config REGULATOR_STW481X_VMMC
>>  	  This driver supports the internal VMMC regulator in the STw481x
>>  	  PMIC chips.
>>  
>> +config REGULATOR_SUN20I
>> +	tristate "Allwinner D1 internal LDOs"
>> +	depends on ARCH_SUNXI || COMPILE_TEST
>> +	depends on MFD_SYSCON && NVMEM
>> +	default ARCH_SUNXI
>> +	help
>> +	  This driver supports the internal LDOs in the Allwinner D1 SoC.
>> +
>>  config REGULATOR_SY7636A
>>  	tristate "Silergy SY7636A voltage regulator"
>>  	help
>> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
>> index fa49bb6cc544..5dff112eb015 100644
>> --- a/drivers/regulator/Makefile
>> +++ b/drivers/regulator/Makefile
>> @@ -148,6 +148,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
>>  obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
>>  obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
>>  obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
>> +obj-$(CONFIG_REGULATOR_SUN20I) += sun20i-regulator.o
>>  obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o
>>  obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
>>  obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
>> diff --git a/drivers/regulator/sun20i-regulator.c b/drivers/regulator/sun20i-regulator.c
>> new file mode 100644
>> index 000000000000..46f3927d7d10
>> --- /dev/null
>> +++ b/drivers/regulator/sun20i-regulator.c
>> @@ -0,0 +1,232 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +//
>> +// Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org>
>> +//
> 
> nit: shouldn't the comment look like
> /*
>  * Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org>
>  */

I have had multiple requests from maintainers to use the former style because it
is more visually consistent. `git grep '^// Copy' drivers sound` returns over
1500 hits. But it doesn't really matter to me.

Regards,
Samuel